Coauthored Publications with: Nunes

Conference Paper

Biscaia, H, Chastre C, Cruz D, Franco N, Nunes R.  2016.  Avaliação experimental de diferentes ligações coladas, 4-6 July 2016. TEST&E 2016 - 1º Congresso de Ensaios e Experimentação em Engenharia Civil. :8., IST, Lisbon, Portugal Abstractteste2016_-_01050_-_biscaia.pdf

A utilização de materiais compósitos de matriz polimérica (Fiber Reinforced Polymers - FRP) como armadura de reforço de diferentes elementos estruturas de várias naturezas (e.g. betão armado, aço, madeira ou alvenaria) tem vindo a suscitar o interesse da comunidade científica internacional. Inicialmente, a simples colagem pelo exterior dos compósitos de FRP aos elementos estruturais permitiu identificar um fenómeno de descolamento prematuro do compósito para níveis de extensão muito aquém dos seus limites de rotura. Com base na experimentação, algumas teorias têm surgido no sentido de explicar o fenómeno do descolamento prematuro dos FRPs. Por outro lado, outras técnicas de reforço têm sido propostas com o objetivo de adiar ou simplesmente eliminar esse fenómeno. Neste trabalho, são analisadas diferentes ligações coladas entre laminados de CFRP e outros materiais tais como, o betão armado, o aço e a madeira. Duas técnicas de reforço por colagem vulgarmente citadas na literatura internacional foram utilizadas: Externally Bonded Reinforcement (EBR) e Near Surface Mounted (NSM). Os resultados experimentais permitiram constatar que o desempenho local das ligações estudadas é distinto, tendo-se observado que as relações entre a tensão de aderência e o deslocamento relativo entre superfícies é: (i) na ligação CFRP/betão do tipo não linear e caracteriza-se por, após atingir-se uma tensão de aderência máxima, o descolamento ocorre quando a tensão de aderência tende para zero; (ii) na ligação CFRP/aço o desempenho é do tipo bi-linear, i.e. com um troço inicial retilíneo até atingir-se uma tensão de pico seguindo-se um troço linear descendente até tensão de aderência nula; e (iii) na ligação CFRP/madeira o desempenho é do tipo tri-linear, i.e. similar à ligação CFRP/aço mas com um troço constante a seguir ao troço linear descendente e que se esgota para um deslocamento relativo último.
Biscaia, H, Chastre C, Cruz D, Franco N, Nunes R.  2016.  Reforço à flexão de pavimentos antigos de madeira com recurso a laminados de fibras de carbono, 4-6 July 2016. TEST&E 2016 - 1º Congresso de Ensaios e Experimentação em Engenharia Civil. :8., IST, Lisbon, Portugal Abstractteste2016_-_01049_-_biscaia.pdf

O dimensionamento de vigas de madeira aos Estados Limites de Utilização (ELUt) tem limites muito apertados tanto para ações de curto prazo como para ações de longo prazo. Uma solução eficiente para este problema passa por aumentar as seções transversais das vigas. Porém, este tipo de solução não só acarreta um aumento de custos como também altera profundamente arquitetura original do edifício abrindo, por conseguinte, uma oportunidade para encontrar outras soluções mais eficientes. Neste sentido, o uso de armaduras de reforço em vigas de madeira pode ser considerado como uma solução promissora uma vez que as estruturas, novas ou velhas, manteriam o aspeto estético original sem introduzir nos elementos reforçados, um aumento significativo do seu peso próprio, melhorando o seu desempenho face a ações de curto e longo prazo. O presente estudo é dedicado à análise de vigas de madeira antigas reforçadas à flexão com materiais compósitos de fibras de carbono, vulgarmente designados na literatura internacional por Carbon Fiber Reinforced Polymers (CFRP). Neste trabalho, foram reforçados e ensaiados à flexão pavimentos antigos de madeira tendo-se analisado os respetivos desempenhos aquando da utilização de uma técnica de reforço por colagem tradicional (Externally Bonded Reinforcement - EBR) e aquando da utilização de uma técnica de reforço por colagem inovadora (Continous Reinforcement Embedded at Ends - CREatE). Os ensaios experimentais permitiram verificar que a técnica de colagem inovadora CREatE confere aos pavimentos de madeira uma maior rigidez e resistência face à técnica tradicional conseguindo se mobilizar a totalidade do compósito de CFRP.
Biscaia, H, Franco N, Nunes R, Chastre C.  2016.  Old suspended timber floors flexurally-strengthened with different structural materials. 15th International Conference on Fracture and Damage Mechanics. (Jesús Toribio, Vladislav Mantič, Andrés Sáez, M.H. Ferri Aliabadi, Ed.)., Alicante, Spain Abstract

The design of timber beams has strict limits when it comes to the Serviceability Limit States (SLS) either in short-term or in long-term deflections. In order to face this aspect efficiently, the increase of the cross section of the beams might be considered as a solution. However, the prohibitive increase of the costs associated to this solution or the change of the initial architecturedesign of the building, opens the opportunity to find new and more efficient solutions. In that way, the use of additional reinforcements to the timber beams may be seen as a promising solution because either new or old structures would keep always their original aesthetical aspect with no significant self-weight increase and improving their behaviour to short and long-term actions.Therefore, the current study is dedicated to the analysis of composite timber beams where Fiber Reinforcement Polymers (FRP), steel or stainless steel are used to improve the stiffness, strength and deflection behaviour of old suspended timber floors. An experimental program was conducted where old suspended timber floors reinforced with CFRP strips were subjected to 4-point bending tests. A simplify nonlinear numerical model was developed to simulate the bending behaviour of the specimens and several other cases with other reinforcement configurations and different structural materials were assumed. The numerical analysis herein presented also takes into account both Ultimate and Serviceability Limit States of the reinforced specimens.

Conference Proceedings

Faria, G, Lúcio V, Chastre C, Nunes A.  2010.  Estudo do comportamento à compressão de compósitos de madeira e cimento. Encontro Nacional Betão Estrutural 2010. , Lisboa: LNEC Abstract
n/a

Journal Article

Faria, G, Chastre C, Lúcio V, Nunes Â.  2013.  Compression behaviour of short columns made from cement-bonded particle board, 3//. Construction and Building Materials. 40:60-69. AbstractWebsite

Cement bonded particle board (CBPB) is a composite material produced in plates consisting mainly of wood and cement, and may contain additives. This material is currently used in cladding, raised floors, dropped ceilings, prefabricated houses, office containers and various supplies to the building industry such as kitchens, bathrooms and furniture. It is composed of a type of wood Pinus pinaster and/or Pinus pinea, Portland cement type II, sodium silicate and aluminium sulphate. CBPB has been the subject of several studies with the purpose of enabling the use of other types of wood or even vegetable biomass, as the chemical compounds from wood (extractives and sugars) tend to inhibit of cement hydration. A study on the behaviour of short CBPB elements under compression was carried out in the Department of Civil Engineering of Universidade NOVA de Lisboa with the aim of enabling its use in structural elements. The study was supported by VIROC, the company which produces CBPB in Portugal. This paper presents and analyses the most significant results of a campaign of axial compression tests performed on 111 specimens of different heights and cross sections. The behaviour of CBPB specimens of varying slenderness was subjected to a more detailed analysis.
Marques, PF, Chastre C, Nunes Â.  2013.  Carbonation service life modelling of RC structures for concrete with Portland and blended cements. Cement and Concrete Composites. 37:171-184. Abstractmarques_chastre_et_al._2013.pdfWebsite

The presented work aims at studying the modelling of long term performance of concrete compositions with different proportions of clinker as regards the diffusion of CO2 in concrete – carbonation. The replacing constituents of clinker that will be part of the binder in each concrete composition are limestone filler and low calcium fly ash (FA). The used percentage of FA by weight of binder was of 50%. Concrete compositions were made following standard prescribed requirements to attain service lives of 50 and 100 years as regards concrete performance against reinforcing steel corrosion. Test results of compressive strength and carbonation depth are reported at different curing ages of 28, 90, 180 and 365 days. Carbonation results were used for the implementation of modelling equations in order to estimate the design service life regarding reinforcing steel corrosion. Two performance-based methods were used: safety factor method and probabilistic method, and their results compared with the traditional prescriptive approach. At the age of 28 days the composition with OPC is the only one that reaches the target periods of 50 or 100 years. For the probabilistic method, different curing age results were analysed. For the tested results at 90, 180 and 365 days of age the reliability of some of the compositions with blended cements is within the minimum required, although still far from the higher performance of concrete with OPC.
Faustino, P, Chastre C, Nunes Â, Brás A.  2016.  Lifetime modelling of chloride induced corrosion in reinforced concrete structures with concrete with portland and blended cements, 2016. Structure and Infrastructure Engineering. 12:1013-1023., Number 9 AbstractWebsite

This article discusses mathematical modelling of the long-term performance of concrete with different supplementary cementitious materials in a maritime environment. The research was carried out in the light of the national Portuguese application of the CEN standards with mandatory requirements for a performance-based design approach. Laboratory investigations were performed on concrete compositions based on CEM I and CEM II/B-L in which the cement was partially replaced by either 0% (reference composition) or 50% of low calcium fly ash (FA). Concrete compositions were made with the objective to achieve service lives of 50 and 100 years with regard to steel corrosion. Test results of compressive strength, chloride potential diffusion and electrical resistivity are reported for different curing ages of 28, 90, 180 and 365 days. Chloride diffusion results were used for the implementation of modelling equations in order to estimate the design lifetime regarding reinforcing steel corrosion. A performance-based approach using a probabilistic method was carried out and the results obtained are compared with the requirements according to the Portuguese prescriptive approach. The modelling results show that FA blended compositions have better performance compared to those with Portland cements, especially if curing ages beyond 28 days are considered.
Biscaia, H, Franco N, Nunes R, Chastre C.  2016.  Old suspended timber floors flexurally-strengthened with different structural materials. Key Engineering Materials. 713:78-81. Abstract

The design of timber beams has strict limits when it comes to the Serviceability Limit States (SLS) either in short-term or in long-term deflections. In order to face this aspect efficiently, the increase of the cross section of the beams might be considered as a solution. However, the prohibitive increase of the costs associated to this solution or the change of the initial architecturedesign of the building, opens the opportunity to find new and more efficient solutions. In that way, the use of additional reinforcements to the timber beams may be seen as a promising solution because either new or old structures would keep always their original aesthetical aspect with no significant self-weight increase and improving their behaviour to short and long-term actions.Therefore, the current study is dedicated to the analysis of composite timber beams where Fiber Reinforcement Polymers (FRP), steel or stainless steel are used to improve the stiffness, strength and deflection behaviour of old suspended timber floors. An experimental program was conducted where old suspended timber floors reinforced with CFRP strips were subjected to 4-point bending tests. A simplify nonlinear numerical model was developed to simulate the bending behaviour of the specimens and several other cases with other reinforcement configurations and different structural materials were assumed. The numerical analysis herein presented also takes into account both Ultimate and Serviceability Limit States of the reinforced specimens.