Rodrigo Martins

In this paper we present results concerning the performance exhibited by an integrated array of 32 one-dimensional amorphous silicon thin film position sensitive detectors based on nip and hetero amorphous silicon structures, with a total active area size below 1 cm2 linearity, its spatial resolution and response time, that make it one of the most interesting analog detector to be used in unmanned optical inspection control systems where a continuous detection process is required. This opens a wide range of applications for amorphous silicon devices in the area of image processing. © 2002 Elsevier Science B.V. All rights reserved.

Amorphous/nanocrystalline silicon p i′ i i′ n devices fabricated on micromachined glass substrates are integrated with oligonucleotide-derivatized gold nanoparticles for a colorimetric detection method. The method enables the specific detection and quantification of unamplified nucleic acid sequences (DNA and RNA) without the need to functionalize the glass surface, allowing for resolution of single nucleotide differences between DNA and RNA sequences-single nucleotide polymorphism and mutation detection. The detector's substrate is glass and the sample is directly applied on the back side of the biosensor, ensuring a direct optical coupling of the assays with a concomitant maximum photon capture and the possibility to reuse the sensor. © 2007 American Institute of Physics.

This new production technique is based on the growth of a-Si films on a reactor where gas decomposition promoted by a capacitively coupled r. f. power system takes place in a chamber separated from that where amorphous films are deposited under the action of an electromagnetic static field. Using this method, we shall reduce films contamination caused by the residual gas desorbed from reactor walls. At the same time, there is a reduction plasma ion and electron damages on the deposited films. The main species impinging upon our substrates will be mainly composed of long life radicals with high mobilities and high diffusion rates, which will give origin to a random silicon network free of long poly-silane chains.

Thick films of cordierite-based glass ceramics were prepared by aqueous tape casting from suspensions containing 80-wt% solids. The weight proportions of cordierite/glass ranged from 70/30 to 30/70 in order to investigate the effect of glass content on the rheological behaviour and on the microstructures and properties of the green tapes. Suspensions with 50 to 60-wt% glass content exhibited the lowest viscosity values among all the slurries investigated, while the green tape containing 30-wt% glass presented homogenous microstructures at both top and bottom surfaces, contrarily to the observations for the other compositions. The green densities increased with glass content. The sintered tapes (1150°C, 2h) containing 50 to 60-wt% glass exhibited the lowest values for the dielectric constant (∼5.2) and dielectric loss (∼0.002) at 1MHz.

Today there is a strong interest in the scientific and industrial community concerning the use of biopolymers for electronic applications, mainly driven by low-cost and disposable applications. Adding to this interest, we must recognize the importance of the wireless auto sustained and low energy consumption electronics dream. This dream can be fulfilled by cellulose paper, the lightest and the cheapest known substrate material, as well as the Earth's major biopolymer and of tremendous global economic importance. The recent developments of oxide thin film transistors and in particular the production of paper transistors at room temperature had contributed, as a first step, for the development of disposable, low cost and flexible electronic devices. To fulfil the wireless demand, it is necessary to prove the concept of self powered devices. In the case of paper electronics, this implies demonstrating the idea of self regenerated thin film paper batteries and its integration with other electronic components. Here we demonstrate this possibility by actuating the gate of paper transistors by paper batteries. We found that when a sheet of cellulose paper is covered in both faces with thin layers of opposite electrochemical potential materials, a voltage appears between both electrodes - paper battery, which is also self-regenerated. The value of the potential depends upon the materials used for anode and cathode. An open circuit voltage of 0.5V and a short-circuit current density of 1μA/cm2 were obtained in the simplest structure produced (Cu/paper/Al). For actuating the gate of the paper transistor, seven paper batteries were integrated in the same substrate in series, supplying a voltage of 3.4V. This allows proper ON/OFF control of the paper transistor. Apart from that transparent conductive oxides can be also used as cathode/anode materials allowing so the production of thin film batteries with transparent electrodes compatible with flexible, invisible, self powered and wireless electronics. © 2011 SPIE.

The intense light scattered from metal nanoparticles sustaining surface plasmons makes them attractive for light trapping in photovoltaic applications. However, a strong resonant response from nanoparticle ensembles can only be obtained if the particles have monodisperse physical properties. Presently, the chemical synthesis of colloidal nanoparticles is the method that produces the highest monodispersion in geometry and material quality, with the added benefits of being low-temperature, low-cost, easily scalable and of allowing control of the surface coverage of the deposited particles. In this paper, novel plasmonic back-reflector structures were developed using spherical gold colloids with appropriate dimensions for pronounced far-field scattering. The plasmonic back reflectors are incorporated in the rear contact of thin film n-i-p nanocrystalline silicon solar cells to boost their photocurrent generation via optical path length enhancement inside the silicon layer. The quantum efficiency spectra of the devices revealed a remarkable broadband enhancement, resulting from both light scattering from the metal nanoparticles and improved light incoupling caused by the hemispherical corrugations at the cells' front surface formed from the deposition of material over the spherically shaped colloids. © 2015 IOP Publishing Ltd.

An advanced compact and analytical drain current model for the amorphous gallium indium zinc oxide (GIZO) thin film transistors (TFTs) is proposed. Its output saturation behavior is improved by introducing a new asymptotic function. All model parameters were extracted using an adapted version of the Universal Method and Extraction Procedure (UMEM) applied for the first time for GIZO devices in a simple and direct form. We demonstrate the correct behavior of the model for negative VDS, a necessity for a complete compact model. In this way we prove the symmetry of source and drain electrodes and extend the range of applications to both signs of VDS. The model, in Verilog-A code, is implemented in Electronic Design Automation (EDA) tools, such as Smart Spice, and compared with measurements of TFTs. It describes accurately the experimental characteristics in the whole range of GIZO TFTs operation, making the model suitable for the design of circuits using these types of devices. © 2016 Elsevier Ltd

A complementary metal oxide semiconductor (CMOS) device is described. The device is based on n-(In-Ga-Zn-O) and p-type (SnO x) active oxide semiconductors and uses a transparent conductive oxide (In-Zn-O) as gate electrode that sits on a flexible, recyclable paper substrate that is simultaneously the substrate and the dielectric. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

This paper presents data concerning the composition structure and optical characteristics of polymorphous silicon films produced by plasma enhanced chemical vapour deposition at 27.12 MHz and determined respectively by infrared spectrometry, micro Raman, exodiffusion and spectroscopic ellipsometry measurements. When compared to the pm-Si:H films produced at 13.56 MHz, the films produced at 27.12 MHz present hydrogen contents in the range of 21 at%, the sharp peak ascribed to the exodifusion measurements is shifted towards high temperatures and the imaginary part of the dielectric function 〈ε2〉 is larger and shifted to high energies. Apart from that the peaks of the infrared spectra ascribed to the stretching modes shift towards high wave numbers and the half width of the micro Raman peaks shrinks, meaning that the films produced at 27.12 MHz are more compact and dense.

The electrosynthesis of polypyrrole (PPy) has been achieved on aluminium in aqueous medium of malic acid by means of cyclic voltammetry, potentiostatic and galvanostatic techniques. Scanning electron microscopy (SEM) and X-ray microanalysis by dispersion energy spectroscopy (EDS) applying on surfaces show that the PPy coating is developed from the metal surface through the cracks of the initial Al2O3 layer. Moreover, the results reveal that the homogeneity of the film achieved increases with the time of electropolymerization. A mechanism involving the participation of the supporting electrolyte and the pyrrole (Py) in distinct active sites was proposed based on the linear sweep voltammetry. It is observed for all the applied electrochemical techniques that the pyrrole concentration has to be higher than 0.1 M to allow the polypyrrole electrodeposition in acid medium. Scanning electron microscopy, secondary electrons (SE) and backscattering electrons (BE), shows that the PPy coating obtained in galvanostatic and potentiostatic modes starts with small islands at weak applied potentials or current densities. The corrosion results in 3% NaCl medium show that the PPy coating decreases the corrosion behaviour of the aluminium. The bilayer Al2O3/PPy shows a capacitor with future applications. © 2006 Elsevier B.V. All rights reserved.

Wide band gap microcrystalline silicon films have aroused considerable interest since they combine some electro-optical advantages of amorphous and crystalline materials highly important to produce electro-optical devices such as TFTs and solar cells. In this paper we present results concerning the electro-optical characteristics of highly transparent and conductive n-type μc-Si based films. Here, emphasis is given to the production of n-type μc-films with optical gaps of 2.3 eV and dark conductivity's of 6.5 Scm-1.

This paper deals with the determination of plasma impedance and ion density in r.f. plasmas using different mixtures of silane with methane or ethylene and r.f. powers. The aim is to correlate these parameters with carbon and hydrogen contents of the films produced. The data achieved show that the best carbon incorporation is achieved using ethylene gas mixtures, under low gas mixture concentration, where the substrate also sustains a low ion bombardment. The data also show that particulates in the plasma can be more easily formed in the ethylene-based processes. © 2001 Published by Elsevier Science B.V.

This work's aim is to report for the first time the cubic to hexagonal phase transition in tin-doped In2O3 films with a Sn/In atomic ratio of 0.03, fabricated at low temperature and normal pressure from alcoholic solution of InCl3 and SnCl4. The performed X-ray diffraction measurements show a difference between crystallographic symmetry of thin (100 nm) and thick (400 nm) films prepared in the same conditions: the structure of thick films can be related to high pressure In2O3 hexagonal system with a preferred orientation of c-axis parallel to the substrate surface, while thin films present a cubic symmetry with columnar (400) grain orientation. Phase transition nature is connected with non-axial tensile deformation of indium oxide grid due to insertion of chlorine ions in the position of two diagonally opposite oxygen vacancies in In2O3 network.

Curcuma longa L., also known as turmeric, is widely used as a food colorant and has been reported to have antioxidant, anti-inflammatory, anti-mutagenic and anti-cancer properties. The aim of this study was to evaluate the effects of the spray drying on curcuminoid and curcumin contents, antioxidant activity, process yield, the morphology and solubility of the microparticulated solid dispersion containing curcuma extract using a Box Behnken design. The microparticles were spherical in shape, and an increase in outlet temperature from 40 to 80 °C resulted in a significant increase in the yield of microparticles from 16 to 53%. The total curcuminoid content (17.15 to 19.57. mg/g), curcumin content (3.24 to 4.25. mg/g) and antioxidant activity (530.1 to 860.3 μg/mL) were also affected by the spray drying process. The solubility of curcuminoid from C. longa remarkably improved 100-fold in the microparticles, confirming the potential of the ternary solid dispersion technique to improve the dyeing and nutraceutical properties of these compounds. Furthermore, the microparticles were obtained using the spray drying process, can be easily scaled up. © 2011 Elsevier Ltd.

The current transport in metal-amorphous semiconductor barriers is examined by solving the proper Poisson's equation and transport equations within the semiconductor's space charge region taking into account the role of trap shallow states distribution function. The effect of metal is also included through appropriate boundary conditions of the above solutions. Generalized transport equations will be derived either when thermionic drift-diffusion emission process dominates or when the conduction mechanism is mainly due to drift-diffusion emission. Both situations will be analysed with or without neglecting carriers losses during their collision free path, from which a tractable expression for the current-voltage characteristic will be determined.

The aim of this work is to provide the basis for the interpretation, under steady state and in the low-voltage regime of the dark current-density-voltage (J-V) characteristics of transverse asymmetric amorphous silicon (a-Si:H) p-i-n and n-i-p diodes. The transverse asymmetric a-Si:H diodes present ratios between the metal contact and the underneath doped layer areas larger than five, leading to the inclusion, in the diode equation, of a lateral leakage current, responsible for the high saturation current density and the forward shape of the J-V curves recorded. The leakage current depends on the lateral spatial potential developed with which varies following a power-law dependence. The experimental J-V curves in diodes with the doped layer around the metal contact unetched and etched prove the role and origin of this lateral leakage current and, thus, the proposed model. © 1995 American Institute of Physics.

The aim of this work is to present a model able to explain the role of the lateral drift current on the experimental behaviour exhibited by p-i-n amorphous silicon solar cells (J-V characteristics, responsivity and the apparent device degradation behaviour), when the ratio between the covered and uncovered metal collected areas of the device is higher than one or recrystallization occurs in the edges of the p-i-n junction.

The interaction of light with wavelength-sized photonic nanostructures is highly promising for light management applied to thin-film photovoltaics. Several light trapping effects come into play in the wave optics regime of such structures that crucially depend on the parameters of the photonic and absorbing elements. Thus, multi-parameter optimizations employing exact numerical models, as performed in this work, are essential to determine the maximum photocurrent enhancement that can be produced in solar cells.Generalized spheroidal geometries and high-index dielectric materials are considered here to model the design of the optical elements providing broadband absorption enhancement in planar silicon solar cells. The physical mechanisms responsible for such enhancement are schematized in a spectral diagram, providing a deeper understanding of the advantageous characteristics of the optimized geometries. The best structures, composed of TiO2 half-spheroids patterned on the cells' top surface, yield two times higher photocurrent (up to 32.5 mA/cm2 in 1.5 μm thick silicon layer) than the same devices without photonic schemes.These results set the state-of-the-art closer to the theoretical Lambertian limit. In addition, the considered light trapping designs are not affected by the traditional compromise between absorption enhancement versus current degradation by recombination, which is a key technological advantage. © 2016 Elsevier Ltd.

The aim of this work is to provide the basis for the interpretation of the steady state lateral photoeffect observed in p-i-n a-Si:H 1D Thin Film Position Sensitive Detectors (1D TFPSD). The experimental data recorded in 1D TFPSD devices with different performances are compared with the predicted curves and the obtained correlation's discussed.

This paper presents results of the spatial and frequency detection limits of an integrated array of 32 one-dimensional amorphous silicon thin film position sensitive detectors with a nip structure, under continuous and pulsed laser operation conditions. The data obtained show that 0.45×0.06 cm arrays, occupying a total active area of about 1 cm2 have a spatial resolution better than 10 μm (modulation transfer function of about 0.2), with a cut-off frequency of about 6.8 KHz. Besides that, under pulsed laser conditions the device non-linearity has its minimum (about 1.6%), for a frequency of about 200Hz. Up to the limits of the cut-off frequency, the device non-linearity increases to values above 4%.

The aim of this study was to investigate the influence of ultrasound and high-shear mixing on the properties of microparticles obtained by spray congealing. Dispersions containing 10% carbamazepine and 90% carrier Gelucire® 50/13 (w/w) were prepared using magnetic stirring, high-shear mixing, or ultrasound. Each preparation was made using hot-melt mixing spray congealing to obtain the microparticles. All microparticles presented a spherical shape with high encapsulation efficiency (>99%). High-shear mixing and ultrasound promoted a decrease in the size of microparticles (D90) to 62.8 ± 4.1 μm and 64.9 ± 3.3 μm, respectively, while magnetic stirring produced microparticles with a size of 84.1 ± 1.4 μm. The use of ultrasound led to microparticles with increased moisture content as identified through sorption isotherm studies. In addition, rheograms showed distinct rheological behaviour among different dispersion preparations. Therefore, the technique used to prepare dispersions for spray congealing can affect specific characteristics of the microparticles and should be controlled during the preparation. © 2013 Informa UK Ltd. All rights reserved.

The influence of U.V. light on the transport properties of a-Si : H films during its growth in a r.f. double chamber system was investigated by conductivity, optical absorption, I.R. absorption, spectral photoconductivity and X-ray diffraction measurements. It was concluded that the presence of U.V. light during the deposition process controls the way how hydrogen is incorporated in the structure as well as the impurity atoms. The microcrystalline films investigated present sharp peaks in the I.R. spectra. Both boron and phosphorus doped films show conductivities higher than 10 S cm-1 and estimated crystalline sizes of the order of 80 Å. © 1987.

The electrosynthesis of polypyrrole (PPy) has been achieved on aluminium in aqueous medium of tartaric acid by means of cyclic voltammetry, potentiostatic and galvanostatic techniques. Scanning electron microscopy (SEM) and X-ray microanalysis by energy spectroscopy dispersion (EDS) applying on surfaces show that the PPy coating is developed from the metal surface through the cracks of the initial Al2O3 layer. A mechanism involving the participation of the supporting electrolyte and the pyrrole (Py) in distinct active sites was proposed based on the linear sweep voltammetry. It is observed for all applied electrochemical techniques that the pyrrole concentration has to be higher than 0.1 M to allow the polypyrrole electrodeposition in acid medium. Scanning electron microscopy, secondary electrons (SE) and backscattering electrons (BE), shows that the PPy coating obtained in galvanostatic and potentiostatic modes starts with small islands at weak applied potentials or current densities. Moreover, EDS reveals a good homogeneity and compactness of the film achieved in galvanostatic method. The corrosion results in 3% NaCl medium show that the PPy coating decreases the corrosion behaviour of the aluminium. The bilayer Al2O3/PPy shows a capacitor with future applications. © 2006 Elsevier Ltd. All rights reserved.

This paper discusses the electron transport and the optical characteristics of amorphous indium zinc oxide and the role of the oxygen partial pressure on tailoring its properties. The data show that by varying the oxygen partial pressure during the deposition process from 10-3 to 2 × 10-1 Pa, the electrical resistivity varies from about 10-4 to 2 × 101 Ω cm, which corresponds to a variation on the Hall mobility from 60 to 10 cm2 V-1 s-1. The conductivity and mobility analysis show that the transport of carriers is not band tail limited, as happens in conventional disordered semiconductors, but highly dependent on the ionicity and the presence of oxygen vacancies, where mobility is mainly limited by carrier scattering. The optical characteristics inferred from the transmittance data reveal films with optical gaps in the range of 3.68-3.76 eV, very close to the ones observed on crystalline/polycrystalline IZO films (3.7-3.9 eV). © 2006 Elsevier B.V. All rights reserved.

The electron transport in n-type polycrystalline zinc oxide, nanocrystalline Zinc-Gallium-Oxygen and amorphous Indium-Zinc-Oxygen systems produced by rf magnetron sputtering at room temperature, under different oxygen partial pressure were investigated. It was found that the carrier transport is not band tail limited, being governed by metal cations irrespective to the film's structure. The highest net room temperature electron mobility was achieved on the amorphous films and noticed that for the single component oxides the mobility decreases as the carrier concentration increases, while the reverse behaviour was observed for the multicomponent oxides, independently of their structure. These behaviours are related to the role that negative charge defects in excess of 1010 cm- 2 generated on multicomponent oxides have on carriers scattering and so on their electronic performances. © 2007 Elsevier B.V. All rights reserved.