We present the results obtained with an extended-gate ISFET totally based on amorphous oxides (GIZO as the semiconductor, {\textless}formula formulatype="inline"{\textgreater}{\textless}tex Notation="TeX"{\textgreater}{\$}{\{}hbox{\{}Ta{\}}{\}}{\_}{\{}2{\}}{\{}hbox{\{}O{\}}{\}}{\_}{\{}5{\}}{\{}hbox{\{}:SiO{\}}{\}}{\_}{\{}2{\}}{\$}{\textless}/tex{\textgreater} {\textless}/formula{\textgreater} as the dielectric and {\textless}formula formulatype="inline"{\textgreater}{\textless}tex Notation="TeX"{\textgreater}{\$}{\{}hbox{\{}Ta{\}}{\}}{\_}{\{}2{\}}{\{}hbox{\{}O{\}}{\}}{\_}{\{}5{\}}{\$}{\textless}/tex{\textgreater} {\textless}/formula{\textgreater} as the sensitive layer). A full characterization of the device was performed with constant ionic strength pH buffer solutions, revealing a sensitivity of 40 mV/pH with small hysteresis, and good linearity in the pH 4{&}{\#}x2013;pH 10 range buffer solutions. These results clearly show that it is possible to produce room-temperature disposable and low cost bio-sensors.

Thin-films of copper oxide Cu O were produced by thermal oxidation of metallic copper (Cu) at different tempera- tures (150–450 C). The films produced at temperatures of 200, 250 and 300 C showed high Hall motilities of 2.2, 1.9 and 1.6 cm V s , respectively. Single Cu O phases were obtained at 200 Cand its conversion toCuO starts at 250 C. For lower thick- nesses 40 nm, the films oxidized at 250 Cshowed a complete conversion to CuO phase. Successful thin-film transistors (TFTs) were produce by thermal oxidation of a 20 nm Cu film, obtaining p-type Cu O (at 200 C) and CuO (at 250 C) with On/Off ratios of 6 10 and 1 10 , respectively.

A colloidal deposition technique is presented to construct long-range ordered hybrid arrays of self-assembled quantum dots and metal nanoparticles. Quantum dots are promising for novel opto-electronic devices but, in most cases, their optical transitions of interest lack sufficient light absorption to provide a significant impact in their implementation. A potential solution is to couple the dots with localized plasmons in metal nanoparticles. The extreme confinement of light in the near-field produced by the nanoparticles can potentially boost the absorption in the quantum dots by up to two orders of magnitude. In this work, light extinction measurements are employed to probe the plasmon resonance of spherical gold nanoparticles in lead sulfide colloidal quantum dots and amorphous silicon thin-films. Mie theory computations are used to analyze the experimental results and determine the absorption enhancement that can be generated by the highly intense near-field produced in the vicinity of the gold nanoparticles at their surface plasmon resonance. The results presented here are of interest for the development of plasmon-enhanced colloidal nanostructured photovoltaic materials, such as colloidal quantum dot intermediate-band solar cells.

Abstract.  The concept of intermediate band solar cell (IBSC) is, apparently, simple to grasp. However, since the idea was proposed, our understanding has improved and some concepts can now be explained more clearly than when the concept was initially introduced. Clarifying these concepts is important, even if they are well known for the advanced researcher, so that research efforts can be driven in the right direction from the start. The six pieces of this work are: Does a miniband need to be formed when the IBSC is implemented with quantum dots? What are the problems for each of the main practical approaches that exist today? What are the simplest experimental techniques to demonstrate whether an IBSC is working as such or not? What is the issue with the absorption coefficient overlap and the Mott's transition? What would the best system be, if any?

One of the major scientific challenges that tissue engineering and regenerative medicine (TERM) faces to move from benchtop to bedside regards biomaterials development, despite the latest advances in polymer processing technologies. A variety of scaffolds processing techniques have been developed and include solvent casting and particles leaching, compression molding and particle leaching, thermally induced phase separation, rapid prototyping, among others. Supercritical fluids appear as an interesting alternative to the conventional methods for processing biopolymers as they do not require the use of large amounts of organic solvents and the processes can be conducted at mild temperatures. However, this processing technique has only recently started to receive more attention from researchers. Different processing methods based on the use of supercritical carbon dioxide have been proposed for the creation of novel architectures based on natural and synthetic polymers and these will be unleashed in this paper. © 2013 Elsevier B.V. All rights reserved.

One of the major scientific challenges that tissue engineering and regenerative medicine (TERM) faces to move from benchtop to bedside regards biomaterials development, despite the latest advances in polymer processing technologies. A variety of scaffolds processing techniques have been developed and include solvent casting and particles leaching, compression molding and particle leaching, thermally induced phase separation, rapid prototyping, among others. Supercritical fluids appear as an interesting alternative to the conventional methods for processing biopolymers as they do not require the use of large amounts of organic solvents and the processes can be conducted at mild temperatures. However, this processing technique has only recently started to receive more attention from researchers. Different processing methods based on the use of supercritical carbon dioxide have been proposed for the creation of novel architectures based on natural and synthetic polymers and these will be unleashed in this paper. © 2013 Elsevier B.V. All rights reserved.

{Two synthetic strategies of tetrathiomolybdate-metal clusters with the potential to be used as NMR structural probes for the location of the metal cofactor in the orange protein (ORP) are described. The first strategy is based on the substitution reaction in which small organic ligands bind directly to the metal centre in a molybdenumcopper hetero-dinuclear cluster. Interaction between {[}PPh4]2{[}MoS4CuCl] and either aliphatic {[}beta-mercaptoethanol (b-me)] or aromatic {[}o-aminobenzenethiol (abt)] thiols in the presence of a strong base resulted in the formation of {[}Ph4P]2{[}S2MoS2Cu(b-me)] (1a) and {[}Et4N]2{[}S2MoS2Cu(abt)]center dot H2O center dot 0.25DMF (1b), which can be used to obtain intermolecular NOEs. The compound 1a readily hydrolyzed to {[}Ph4P]2{[}OSMoS2Cu(b-me)] (1ahydro) in contact with a protic solvent. The second strategy consisted of the incorporation of cadmium into tetrathiomolybdate ({[}MoS4]2), which gives rise to the trinuclear cluster compound {[}PPh4]2{[}(MoS4)2Cd] (2). All clusters were characterized spectroscopically and their structure determined by X-ray diffraction. The NMR spectroscopic data are consistent with the formation of a complex with a 1:1 ratio of \{MoS4Cu\} and thiol. The 113Cd NMR chemical shift of compound 2 is consistent with the cadmium having a tetrahedral geometry and coordinated by four sulfur ligands. The tetraphenylphosphonium cation in compound 1a was replaced by a tetramethylammonium countercation originating in the water-soluble compound {[}Me4N-1a]. Solubility in aqueous buffers is a requirement for incorporating this cluster into apo-ORP. These compounds will be used to identify the exact location of the ORP heterometallic cluster using NMR methodologies.}

n/a

{Three new emissive 8-aminoquinoline derived probes (1)-(3) and one dinuclear Zn(II) complex (4) were synthesized and fully characterized. Their absorption spectra show maxima at 310-336 nm, and fluorescence emission between 456 and 498 nm. Compound (1) was characterized by single crystal X-ray diffraction. The effect upon Zn(II) and Cu(II) coordination to compounds (1)-(3) was studied by monitoring the changes in absorption and fluorescence spectra, and complemented by calculation of metal-ligand stability constants. The results indicate that compound (3) is the one that presents the most favorable geometry for coordinating two metal cations, fact that is confirmed by the synthesis of the dinuclear complex (4), with similar molecular geometry. (C) 2011 Elsevier B.V. All rights reserved.}

{Reaction of {[}Co(eta(5)-C5H5)(CO)(2)], 1, with 1,1'-bis(diphenylphosphino)ferrocene (dppf) yields the new trinuclear complex {[}Co(eta(5)-C5H5)(CO)](2)(mu-dppf), 2, which was structurally characterised by single crystal X-ray diffraction and showed two Co(eta(5)-C5H5)(CO) moieties covalently linked by a dppf bridge. Electrochemical studies in dichloromethane revealed that both Co(I) and Fe(II) in the precursors were oxidized to Co(II)/Co(III) and Fe(III), respectively. On the other hand, in 2 the two first oxidation waves were assigned to Co, the Fe(II) centre requiring a higher potential than in free dppf. DFT calculations showed that the HOMOs of 2 were localised in the Co fragments, owing to the destabilisation of the Co(eta(5)-C5H5)(CO) orbitals after binding dppf. (C) 2012 Elsevier B.V. All rights reserved.}

Two synthetic strategies of tetrathiomolybdate-metal clusters with the potential to be used as NMR structural probes for the location of the metal cofactor in the orange protein (ORP) are described. The first strategy is based on the substitution reaction in which small organic ligands bind directly to the metal centre in a molybdenumcopper hetero-dinuclear cluster. Interaction between [PPh4]2[MoS4CuCl] and either aliphatic [beta-mercaptoethanol (b-me)] or aromatic [o-aminobenzenethiol (abt)] thiols in the presence of a strong base resulted in the formation of [Ph4P]2[S2MoS2Cu(b-me)] (1a) and [Et4N]2[S2MoS2Cu(abt)]center dot H2O center dot 0.25DMF (1b), which can be used to obtain intermolecular NOEs. The compound 1a readily hydrolyzed to [Ph4P]2[OSMoS2Cu(b-me)] (1ahydro) in contact with a protic solvent. The second strategy consisted of the incorporation of cadmium into tetrathiomolybdate ([MoS4]2), which gives rise to the trinuclear cluster compound [PPh4]2[(MoS4)2Cd] (2). All clusters were characterized spectroscopically and their structure determined by X-ray diffraction. The NMR spectroscopic data are consistent with the formation of a complex with a 1:1 ratio of {MoS4Cu} and thiol. The 113Cd NMR chemical shift of compound 2 is consistent with the cadmium having a tetrahedral geometry and coordinated by four sulfur ligands. The tetraphenylphosphonium cation in compound 1a was replaced by a tetramethylammonium countercation originating in the water-soluble compound [Me4N-1a]. Solubility in aqueous buffers is a requirement for incorporating this cluster into apo-ORP. These compounds will be used to identify the exact location of the ORP heterometallic cluster using NMR methodologies.

Purpose – The purpose of this paper is to explore the deployment of RFID technology in fashion supply chain management (FSCM). It highlights the contribution of RFID to FSCM, supporting faster logistics activities, with greater products quality, cheaper and with more responsiveness, improving customer satisfaction. Design/methodology/approach – An inductive theory building approach is used to develop a conceptual model for RFID deployment in the {FSCM} context. Secondary data analysis from a sample of six companies supports the identification and discussion of the real advantages, disadvantages and barriers felt by companies in a fashion supply chain when {RFID} technology is introduced. Findings – The logistics activities in the fashion supply chain where {RFID} technology is most widely deployed are: shipping operations, tracking of raw materials, semi-finished components and finished garments, collecting finished goods, handling processes, tracking containers, tracking products from factory to store, receiving operations, monitoring, and sorting of merchandise. In most cases, the tagging operation is performed at some stage in the production process and tag reading occurs at distribution centres or at stores. The main barrier identified to the deployment of {RFID} is the problem of interoperability. The costs associated with the technology are the main disadvantage pointed out by the companies. Practical implications – A conceptual framework is proposed exploring the {RFID} advantages and disadvantages across the fashion supply chain, the main barriers to its introduction and the fashion supply chain logistics activities in which {RFID} could be found. This represents an important contribution to companies in this industry to become more aware of {RFID.} Also, new companies which are thinking of introducing this technology could overcome its barriers easily, improving its advantages and minimizing its disadvantages. Originality/value – This paper explores the deployment of {RFID} in the fashion supply chain from the perspective of technology users.

The concentration of lead in liver and kidneys of Wistar rats, fed with lead since fetal period in relation to their age and to a control group, was determined. A group of rats was exposed to lead acetate (n=30) in drinking water and the other group was exposed to normal water (n=20). Samples were collected from rats aging between 1 and 11 months and were analyzed by Energy Dispersive X-ray Fluorescence (EDXRF) without any chemical preparation. The EDXRF results were assessed by the PIXE (Proton Induced X-ray Emission) technique. The formaldehyde used to preserve the samples was also analyzed by ETAAS (Electro-Thermal Atomic Absorption Spectrometry) in order to verify if there was any loss of lead from the samples to the formaldehyde. We found that the loss was not significant (<2%). Concerning the mean values of the lead concentration measured in the contaminated soft tissues, in liver they range from 6 to 22μgg(-1), and in kidneys from 44 to 79μgg(-1). The control rats show, in general, values below the EDXRF detection limit (2μgg(-1)). The ratio kidney/liver ranges from 2 to 10 and is strongly positively correlated with the age of the animals. A Spearman correlation matrix to investigate the correlation between elemental concentrations and the dependence of these concentrations with age showed that there is a strong positive correlation with age for lead in the liver but not in the kidney. The correlation matrix showed also that the concentration of lead in these two soft tissues is not correlated. The lead accumulation in liver is made by different plateaus that strongly decrease with age. It was verified the existence of two levels of accumulation in kidney, not very highlighted, which might be indicative of a maximum accumulation level for lead in kidney.

The concentration of lead in liver and kidneys of Wistar rats, fed with lead since fetal period in relation to their age and to a control group, was determined. A group of rats was exposed to lead acetate (n=30) in drinking water and the other group was exposed to normal water (n=20). Samples were collected from rats aging between 1 and 11 months and were analyzed by Energy Dispersive X-ray Fluorescence (EDXRF) without any chemical preparation. The EDXRF results were assessed by the PIXE (Proton Induced X-ray Emission) technique. The formaldehyde used to preserve the samples was also analyzed by ETAAS (Electro-Thermal Atomic Absorption Spectrometry) in order to verify if there was any loss of lead from the samples to the formaldehyde. We found that the loss was not significant (<2%). Concerning the mean values of the lead concentration measured in the contaminated soft tissues, in liver they range from 6 to 22μgg(-1), and in kidneys from 44 to 79μgg(-1). The control rats show, in general, values below the EDXRF detection limit (2μgg(-1)). The ratio kidney/liver ranges from 2 to 10 and is strongly positively correlated with the age of the animals. A Spearman correlation matrix to investigate the correlation between elemental concentrations and the dependence of these concentrations with age showed that there is a strong positive correlation with age for lead in the liver but not in the kidney. The correlation matrix showed also that the concentration of lead in these two soft tissues is not correlated. The lead accumulation in liver is made by different plateaus that strongly decrease with age. It was verified the existence of two levels of accumulation in kidney, not very highlighted, which might be indicative of a maximum accumulation level for lead in kidney.

The spontaneous two-photon emission in hydrogenlike ions is investigated within the framework of second- order perturbation theory and Dirac’s equation. Special attention is paid to the angular correlation of the emitted photons as well as to the degree of linear polarization of one of the two photons, if the second is just observed under arbitrary angles. Expressions for the angular correlation and the degree of linear polarization are expanded in powers of cosine functions of the two-photon opening angle, whose coefficients depend on the atomic number and the energy sharing of the emitted photons. The effects of including higher (electric and magnetic) multipoles upon the emitted photon pairs beyond the electric-dipole approximation are also discussed. Calculations of the coefficients are performed for the transitions 2s1/2 → 1s1/2, 3d3/2 → 1s1/2, and 3d5/2 → 1s1/2, along the entire hydrogen isoelectronic sequence (1

The spontaneous two-photon emission in hydrogenlike ions is investigated within the framework of second- order perturbation theory and Dirac’s equation. Special attention is paid to the angular correlation of the emitted photons as well as to the degree of linear polarization of one of the two photons, if the second is just observed under arbitrary angles. Expressions for the angular correlation and the degree of linear polarization are expanded in powers of cosine functions of the two-photon opening angle, whose coefficients depend on the atomic number and the energy sharing of the emitted photons. The effects of including higher (electric and magnetic) multipoles upon the emitted photon pairs beyond the electric-dipole approximation are also discussed. Calculations of the coefficients are performed for the transitions 2s1/2 → 1s1/2, 3d3/2 → 1s1/2, and 3d5/2 → 1s1/2, along the entire hydrogen isoelectronic sequence (1 Z 100).

A relativistic analysis of the polarization properties of light elastically scattered by atomic hydrogen is performed, based on the Dirac equation and second-order perturbation theory. The relativistic atomic states used for the calculations are obtained by making use of the finite basis set method and are expressed in terms of B splines and B polynomials. We introduce two experimental scenarios in which the light is circularly and linearly polarized, respectively. For each of these scenarios, the polarization-dependent angular distribution and the degrees of circular and linear polarization of the scattered light are investigated as a function of scattering angle and photon energy. Analytical expressions are derived for the polarization-dependent angular distribution which can be used for scattering by both hydrogenic as well as many-electron systems. Detailed computations are performed for Rayleigh scattering by atomic hydrogen within the incident photon energy range 0.5 to 5 keV. Particular attention is paid to the effects that arise from higher (nondipole) terms in the expansion of the electron-photon interaction.

A relativistic analysis of the polarization properties of light elastically scattered by atomic hydrogen is performed, based on the Dirac equation and second-order perturbation theory. The relativistic atomic states used for the calculations are obtained by making use of the finite basis set method and are expressed in terms of B splines and B polynomials. We introduce two experimental scenarios in which the light is circularly and linearly polarized, respectively. For each of these scenarios, the polarization-dependent angular distribution and the degrees of circular and linear polarization of the scattered light are investigated as a function of scattering angle and photon energy. Analytical expressions are derived for the polarization-dependent angular distribution which can be used for scattering by both hydrogenic as well as many-electron systems. Detailed computations are performed for Rayleigh scattering by atomic hydrogen within the incident photon energy range 0.5 to 5 keV. Particular attention is paid to the effects that arise from higher (nondipole) terms in the expansion of the electron-photon interaction.

This paper aims to study the influence of eco-innovation practices on eco-efficiency of business, which embraces environmental and economic performance. Four hypotheses are drawn up based on the existing literature in green supply chain and considering the business innovation. A survey questionnaire was used to collect data on a sample of {USA} and Portuguese innovative organizations. Multivariate statistics and Partial Least Squares ({PLS)} path modelling techniques were used to test the proposed hypothesis. The statistical analysis allows to conclude that there are differences between the eco-innovation practices deployed by organizations belonging to different sectors and with different sizes. Also, it was found that the level of implementation of the different eco-innovation practices by organizations influence the eco-efficiency of businesses.