António Moniz

This paper intended to provide a vision on the potential consequences of the introduction of emerging air transportation system which was based on a section of the thesis to contribute to the forming of public and policy opinion.Especially this paper tried to understand whether there were enough positive social and environmental impacts in terms of potential benefits to continue the efforts.The negative impacts are beyond the scope of this paper. Limitations of the current ground and airline transportation systems, increasing congestion, poor block speed, combined with expanding population and demand for affordable on-demand mobility are driving the development of future transportation technology and policy. The third wave of aeronautic,e VTOL (Vertical Takeoff and landing) Air Transportation System, is envisioned as the next logical step in the natural progression and could bring about great new capabilities for society that would bring aviation into a new age of being relevant in daily lives. Considering door to door block time, e VTOL Air Transportation System has the potential to achieve anotherfive-fold increase over the auto today as the auto provided ten-fold increase over the horse, and a daily mobility reach of 125 to 250 miles.The main benefits will be on-demand, point-to-point,safe travel, further and anywhere in less travel time with almost zero environmental impact for general people. Besides, a successful implementation and sustainable transition will depend on overcoming technological hurdles, regulatory frameworks, operational safety, cost competitiveness, and sensibilities of the affected communities.

The last decades have shown an increasing amount of research into expectations of science and technology. Especially for emerging technologies, expectations held by different stakeholder are guiding the direction of research and development. In this article the results of an investigation into the expectations of specific actors regarding the development of emerging battery technology for applications in the power grid are presented. It is set up as an explorative study within the framework of Constructive Technology Assessment (CTA). A number of studies since the 1990s have indicated a growing need for energy storage options in the power grid, where batteries appear to be capable of providing a range of valuable services to the grid. Cost-effectiveness on a large scale will however require considerable technical improvements. The configuration of energy storage may differ in the specific location and exploitation of the storage assets, as well as in the investments in new storage capacity. In this study the visions and expectations of several relevant actors are analysed using interviews and surveys in terms of expectations of technological development, expectations concerning stakeholder roles, and channels of interaction between the relevant actors. The results indicate a divide in expectations between the user side of the technology (the electric power industry) and the development side (academic researchers). Opinions differ with respect to the obstacles to technological development, the actors relevant in early technological development, and the most suitable channels for interaction between these actors. It follows from the theoretical background that conflicts in expectations provide the opportunity for the acceleration of technological development and adoption through stakeholder participation. Small interactive workshops, where conflicts identified in this paper are discussed, were identified as a suitable channel in order to reach consensus in visions and expectations for battery technology.

The aim of the TeleRisk Project on labour relations and professional risks within the context of teleworking in Portugal – supported by IDICT – Institute for Development and Inspection of Working Conditions (Ministry of Labour), is to study the practices and forms of teleworking in the manufacturing sectors in Portugal. The project chose also the software industry as a reference sector, even though it does not intend to exclude from the study any other sector of activity or the so-called “hybrid” forms of work. However, the latter must have some of the characteristics of telework. The project thus takes into account the so-called “traditional” sectors of activity, namely textile and machinery and metal engineering (machinery and equipment), not usually associated to this type of work. However, telework could include, in the so-called “traditional” sectors, other variations that are not found in technologically based sectors. One of the evaluation methods for the dynamics associated to telework consisted in carrying out surveys by means of questionnaires, aimed at employers in the sectors analysed. This paper presents some of the results of those surveys. It is important to mention that, being a preliminary analysis, it means that it does not pretend to have exhausted all the issues in the survey, but has meant that it shows the bigger tendencies, in terms of teleworking practices, of the Portuguese industry.

The aim of the TeleRisk Project on labour relations and professional risks within the context of teleworking in Portugal – supported by IDICT – Institute for Development and Inspection of Working Conditions (Ministry of Labour), is to study the practices and forms of teleworking in the manufacturing sectors in Portugal. The project chose also the software industry as a reference sector, even though it does not intend to exclude from the study any other sector of activity or the so-called “hybrid” forms of work. However, the latter must have some of the characteristics of telework. The project thus takes into account the so-called “traditional” sectors of activity, namely textile and machinery and metal engineering (machinery and equipment), not usually associated to this type of work. However, telework could include, in the so-called “traditional” sectors, other variations that are not found in technologically based sectors. One of the evaluation methods for the dynamics associated to telework consisted in carrying out surveys by means of questionnaires, aimed at employers in the sectors analysed. This paper presents some of the results of those surveys. It is important to mention that, being a preliminary analysis, it means that it does not pretend to have exhausted all the issues in the survey, but has meant that it shows the bigger tendencies, in terms of teleworking practices, of the Portuguese industry.

This is the second interim report of the research project "Information Society, Work and the Generation of New Forms of Social Exclusion" (SOWING). It is based on a firm survey conducted in the eight regions participating in the research project — Flanders (Belgium), Lazio (Italy), Niederösterreich (Austria), Portugal, the Republic of Ireland, the Stuttgart area (Germany), the Tampere region (Finland) and the West London area (U.K.). The aim of this report is to present a broad overview of the collected data. In general, only simple statistical methods have been applied. The report focuses on a regional comparison; however, the data have also been analysed by firm size, measured by quantity of staff, and industrial sector. It should be seen as a first step in the data analysis; it may also give some hints for a more strategic analysis of the survey data.

This preliminary report presents the outcomes of desk research, which was oriented to obtain a clear picture of the ‘state of the art’ in the involved countries and sectors. The report first reviews the main concepts and categories used to approach the topic and provides a definition of virtual work. Second, it describes the incidence and features of virtual work based on both European and national surveys. Third, it reviews previous research outcomes on the effects of virtual work on working conditions at national and sectoral level. Fourth, it analyses national approach to regulate virtual work. Fifth, the report addresses main institutional features of industrial relations in the three sectors and five countries; and the role played by social dialogue and collective bargaining at sectoral and company level to regulate working conditions of virtual workers.

Flexibilisation and complexification of working places, due to the information technologies, requires an holistic approach to the labour reality, in an integrative and wide perspective of different scenarios and operational contexts. Such new changes implies the development of new personal and professional features that are beyond the restrict frame of the autonomous, discrete and specialised work. The knowledge needed for the work in organisations can be searched in the working processes modelling. And that can be a constructive basis of a “knowledge map”. Thus, are described the activities of different working processes, and that induces the emergence of a group of informations (indicators) necessary to the construction of each competence that supports the execution of those processes. This action even allows the existence of possible gaps in the strategies of long-life education and training. They assume more and more a critical support to the need of updating and maintenance of professional competences. How to identify and operationalise the professional competences in a working complex system is one of the main issues in this paper. The case study presented in this paper is refered to the air traffic control and it presents the methodology used for the identification and validation of a group of structuring professional competencies that are evident in a complex working system.

Nesta comunicação em que se discutem, numa perspectiva de complementaridade, os conceitos de qualificação e de competência profissional, dá-se conta da metodologia adoptada para a identificação e validação de um conjunto de competências profissionais num sistema complexo de trabalho. O estudo incidiu sobre os Serviços de Controlo de Tráfego Aéreo da Região de Informação de Voo de Lisboa e permitiu concluir pela existência de uma dimensão integrativa das componentes trabalho e tecnologia, enquanto elementos estruturantes dos mapas de competências profissionais, indispensáveis à integração sistémica dos diferentes agentes (humanos e tecnológicos) no processo produtivo.

Cognitive task automation may lead to over trust, complacency and loss of the necessary work environment situation awareness. This is a major constraint in complex work organizations teamwork, ending up into an operational gap, between system developments and its understanding and usability, by operators. This document presents a summary of the main results of author’s research on operational decision processes and occupational competences, applied to the air traffic control operational reality. Introducing a human/technological complementary approach to virtual team’s conceptualisation, the results show there is a dimension to be followed in human/machine integration, which stands beyond interface design, and calls for a deeper human comprehension of technological agent’s structure and functionalities, which will, ultimately, require the development of an operational cognitive framework, where work processes and technological behaviour are integrated in professional competences, as he two faces of the same coin.

The present communication analyses the relationships between work organisation and quality systems. The analysis is based on results from a study funded by the "Specific Programme for the Development of Portuguese Industry" (PEDIP). The main issues which have been currently associated with work organisation and quality control in the Portuguese industry are characterized. Critical features related to the implementation of quality systems and new methods of work organisation for industrial development are also discussed. A few recommendations are given in order to promote appropriate methods of work organisation for quality improvement within Portuguese industry.

In this paper it is analysed the relationships between work organisation and quality systems in firms that uses some forms of advanced automation. Are characterised the existing quality control structures in the Portuguese industry, and the main factors that hidden or fosters the development of sociotechnical methods of quality control organisation strategies. Are analysed some industrial cases that explains more clearly the critical issues of the implementation of quality systems and work organisation systems. A few recommendations are given about the possibilities for the development of new forms of work organisation and the quality systems associated to automated manufacturing systems.

Portugal has been referred as one example of lower levels of integration of social partners in the governance of education and training systems (Sanz de Miguel, 2017). There is lack of research about the effectiveness of the governance of the only program close to the Dual VET concept: the Apprenticeship system. A pilot project of Dual VET ran from 2012 and terminated in 2016 without substantial evaluation. The objective of this paper is to provide an overview of the role social partners have in the governance of the existing Portuguese Apprenticeship system. We carried out extensive review of the scientific and grey literature about Dual VET for youngsters in Portugal, as well as database queries to official statistical sources. Our research reveals a complex formal role: The employment agency IEFP provides funding for Apprenticeship and negotiates with the main social partners the allocation of the Single Social Tax for its regional centres. Indirectly, many social partners are formally involved in the general VET governance participating in various coordination and monitoring structures of the National System of Qualifications and other regulatory agencies (IEFP and ANQEP). In this article we also discuss possible causes for the failure of the pilot Dual VET, which took effect within the scope of a curricular review of the primary and secondary education.

1st ISA Forum report

With the emergence of a global division of labour, the internationalisation of markets and cultures, the growing power of supranational organisations and the spread of new information technologies to every field of life, it starts to appear a different kind of society, different from the industrial society, and called by many as ‘the knowledge-based economy’, emphasizing the importance of information and knowledge in many areas of work and organisation of societies. Despite the common trends of evolution, these transformations do not necessarily produce a convergence of national and regional social and economic structures, but a diversity of realities emerging from the relations between economic and political context on one hand and the companies and their strategies on the other. In this sense, which future can we expect to the knowledge economy? How can we measure it and why is it important? This paper will present some results from the European project WORKS – Work organisation and restructuring in the knowledge society (6th Framework Programme), focusing the future visions and possible future trends in different countries, sectors and industries, given empirical evidences of the case studies applied in several European countries, underling the importance of foresight exercises to design policies, prevent uncontrolled risks and anticipate alternatives, leading to different ‘knowledge economies’ and not to the ‘knowledge economy’.

WORKS final conference report

In Europe, the technology development of high-speed trains is increasingly exposed to societal needs, driven by ICT advancements, external to traditional design. Together with the liberalisation of the rail markets and increase pressures from other transport modes leads to an unprecedented situation where planers, operators and suppliers of high-speed have to take decision in this complex and competitive environment.
In such broadening of elements influencing design and, thus, product development process, from the survey here to be presented, it was not observed technology options assessment or strategic agenda setting from visions shifting in the same way.
For the high-speed train industry this new trend requires going beyond the visions of the past 15 to 20 years’ practices of “sector endogenous” and structurally closed strategic methods approaches to a broader interaction with the widening of societal actors now capable of being active contributors to innovation from digitalization.
This way to understand the European industry readiness for undertaking such supra systemic challenge, this paper presents the results from a survey conducted by the authors to 74 representatives of the high-speed train innovation chain regarding to which extent societal embedding is considered in the drafting of their visions and technology development projects.
This work becomes even more pertinent if considered that the debate is now open in the railway industry (not exclusive to high-speed trains) as they are launching the joint initiative SHIFT2RAIL, revise ERRAC (the European Rail Research Advisory Council) mandate and enter in a new research cycle with the European research framework Horizon 2020.

No abstract is available for this item.

In this paper one presents and discuss the hybridation concept using some aspect that integrate it, as the physical architecture of automated systems (hardware), the information system that integrates that architecture and the working places design. Analyzed are also the inter-dependences of those aspects, and we have as a reference the flexible production and assembly system existent at UNINOVA-CRI. The focus is made on possible problems that can occur with the use of possible development of those systems, namely: a) full automation with centralized human control, b) non-automated process of shop-floor work with a system “one man, one machine”, c) hybrid system of automated cells with “elastic” human jobs.

The clothing sector in Portugal is still seen, in many aspects as a traditional sector with some average characteristics, such as: low level of qualifications, less flexible labour legislation and stronger unionisation, very low salaries and low capability of investment in innovation and new technology. Is, nevertheless, a very important sector in terms of labour market, with increased weight in the exporting structure. Globalisation and delocalisation are having a strong impact in the organisation of work and in occupational careers in the sector. With the pressure of global competitiveness in what concerns time and prices, very few companies are able to keep a position in the market without changes in organisation of work and workers. And those that can perform good responses to such challenges are achieving a better economical stability. The companies have found different ways to face this reality according to size, capital and position. We could find two main paths: one where companies outsource a part or the entire production to another territory (for example, several manufacturing tasks), close and/or dismissal the workers. Other path, where companies up skilled their capacities investing, for example, in design, workers training, conception and introduction of new or original products. This paper will present some results from the European project WORKS – Work organisation and restructuring in the knowledge society (6th Framework Programme), focusing the Portuguese case studies in several clothing companies in what concern implications of global context for the companies in general and for the workers in particular, in a comparative analysis with some other European countries.