n/a

n/a

n/a

n/a

n/a

The material in analysis is the skull of an Ornitiquous Psittacosaurus of the China Cretaceous suspicious of being a fraud. The fossil described here appeared to be in very good condition and conservation. The skull is almost complete but because it is filled by sediment, this prevents an analyse of the intra-skull anatomy.
With the intuition of confirming or not the existence of fossiled bone elements in the interior of the sedimented mass that filled the Psittacossaurus skull, it was submitted to a Computorized Tomography.
The Psittacosaurus skull showed an unexpected absorption of the x-rays, because of the outstanding differences of density between the bone and the matrix due to the fact that the interior of the skull was composed by an amalgam of materials, where a less compact and relatively homogeneous material (soil and wax) was found and that material united and mounted the whole skull and the normal bone structures were non-existing.
The capacity of the Computorized Axial Tomography of differentiating materials with different densities of absorption of x-rays, permitted an easy and reliable investigation and explained beyond doubt the quality of the fossil specimen studied, concluding with no doubt that in spite of the realistic aspect, we had come before a fraud.

n/a

n/a

dinosaur genera Diceratops Lull, 1905 and Microceratops Bohlin, 1953 are preoccupied by the Hymenoptera insects, Diceratops Foerster, 1868 and Microceratops Seyrig, 1952, respectively. Therefore, the name of the ceratopsian dinosaur Diceratops Lull, 1905 from the Late Cretaceous of United States is a junior homonym of the hymenoptera Diceratops Foerster, 1868. Diceratus n. gen. (Greek di ‘‘two,’’ Greek ceratos ‘‘horned’’) is proposed as the replacement name of Diceratops Lull, 1905. Some workers have considered Diceratops synonymous with Triceratops (e.g., Dodson and Currie, 1990) but it was reinstated by Forster (1996) after analysis of the characteristics of all existing ceratopsid skulls, and recent reviews (e.g., Dodson et al., 2004) have considered Diceratops a valid genus.
Due to preoccupation, the name of the ceratopsian dinosaur Microceratops Bohlin, 1953 from the Cretaceous of the Gobi is
a junior homonym of the insect Microceratops Seyrig, 1952. Microceratus n. gen. (Greek micro ‘‘small,’’ Greek ceratos ‘‘horned’’) is proposed as the replacing name of Microceratops Bohlin, 1953.
Sereno (2000:489) has declared Microceratops a nomen dubium since the holotype material lacks any diagnostic features, a
convention followed by You and Dodson (2004:480). However, the name is still used by Le Loeuff et al. (2002), Lucas (2006),
Alifanov (2003) and Xu et al. (2002), and such practice justifies the renaming of the genus.
In order to preserve some stability, the names chosen here deliberately preserve the same prefixes.

This paper presents the design of a test rig for an all HTS linear synchronous motor. Although this motor showed to have several unattractive characteristics, its design raised a number of problems which must be considered in future HTS machines design. HTS electromagnetic properties led to the development of new paradigms in electrical machines and power systems, as e. g. in some cases iron removal and consequent assembly of lighter devices. This is due to superconductor's ability to carry high currents with minimum losses and consequent generation in the surrounding air of flux densities much higher than the allowed by ferromagnetic saturation. However, severe restrictions in HTS power devices design that goes further beyond cryogenic considerations must be accounted in. This is usually the case when BSCCO tapes are used as conductors. Its bending limitations and the presence of flux components perpendicular to tape surface, due to the absence of iron, have to be considered for it may turn some possible applications not so attractive or even practically unfeasible. An all HTS linear synchronous motor built by BSCCO tapes as armature conductors and two trapped-flux YBCO bulks in the mover was constructed and thrust force measurements are starting to be performed. Although the device presents severe restrictions due to the exposed and other reasons, it allowed systematising its design. A pulsed-field magnetiser to generate opposite fluxes for both YBCO bulks is also detailed. Thrust force numerical predictions were already derived and presented.

This paper presents the design of a test rig for an all HTS linear synchronous motor. Although this motor showed to have several unattractive characteristics, its design raised a number of problems which must be considered in future HTS machines design. HTS electromagnetic properties led to the development of new paradigms in electrical machines and power systems, as e. g. in some cases iron removal and consequent assembly of lighter devices. This is due to superconductor's ability to carry high currents with minimum losses and consequent generation in the surrounding air of flux densities much higher than the allowed by ferromagnetic saturation. However, severe restrictions in HTS power devices design that goes further beyond cryogenic considerations must be accounted in. This is usually the case when BSCCO tapes are used as conductors. Its bending limitations and the presence of flux components perpendicular to tape surface, due to the absence of iron, have to be considered for it may turn some possible applications not so attractive or even practically unfeasible. An all HTS linear synchronous motor built by BSCCO tapes as armature conductors and two trapped-flux YBCO bulks in the mover was constructed and thrust force measurements are starting to be performed. Although the device presents severe restrictions due to the exposed and other reasons, it allowed systematising its design. A pulsed-field magnetiser to generate opposite fluxes for both YBCO bulks is also detailed. Thrust force numerical predictions were already derived and presented.

This paper presents the design of a test rig for an all HTS linear synchronous motor. Although this motor showed to have several unattractive characteristics, its design raised a number of problems which must be considered in future HTS machines design. HTS electromagnetic properties led to the development of new paradigms in electrical machines and power systems, as e. g. in some cases iron removal and consequent assembly of lighter devices. This is due to superconductor's ability to carry high currents with minimum losses and consequent generation in the surrounding air of flux densities much higher than the allowed by ferromagnetic saturation. However, severe restrictions in HTS power devices design that goes further beyond cryogenic considerations must be accounted in. This is usually the case when BSCCO tapes are used as conductors. Its bending limitations and the presence of flux components perpendicular to tape surface, due to the absence of iron, have to be considered for it may turn some possible applications not so attractive or even practically unfeasible. An all HTS linear synchronous motor built by BSCCO tapes as armature conductors and two trapped-flux YBCO bulks in the mover was constructed and thrust force measurements are starting to be performed. Although the device presents severe restrictions due to the exposed and other reasons, it allowed systematising its design. A pulsed-field magnetiser to generate opposite fluxes for both YBCO bulks is also detailed. Thrust force numerical predictions were already derived and presented.

n/a

n/a

n/a

The spread of systems that provide parallelism either ‘‘in-the-large’’ (grid infrastructures, clusters) or ‘‘in-the-small’’ (multi-core chips), creates new opportunities for exploiting parallelism in a wider spectrum of application domains. However, the increasing complexity of parallel and distributed platforms renders the programming, the use, and the management of these systems a costly endeavor that requires advanced expertise and skills. Therefore, there is an increasing need for powerful support tools and environments that will help end-users, application programmers, software engineers and system administrators to manage the increasing complexity of parallel and distributed platforms.

The spread of systems that provide parallelism either «in-the-large» (grid infrastructures, clusters) or «in-the-small» (multi-core chips), creates new opportunities for exploiting parallelism in a wider spectrum of application domains. However, the increasing complexity of parallel and distributed platforms renders the programming, the use, and the management of these systems a costly endeavor that requires advanced expertise and skills. Therefore, there is an increasing need for powerful support tools and environments that will help end-users, application programmers, software engineers and system administrators to manage the increasing complexity of parallel and distributed platforms.

n/a

n/a

n/a

n/a

n/a

n/a

n/a

The emergence of multi-core processors is promoting the use of concurrency and multithreading. To raise the abstraction level of synchronization constructs is fundamental to ease the development of concurrent software, and Software Transactional Memory (STM) is a good approach towards such goal. However, execution environment issues such as the processor instruction set, caching policy, and memory model, may have strong influence upon the reliability of STM engines. This paper addresses the testing of STM engines aiming at improving their reliability and independence from execution environment. From our experience with porting and extending a specific STM engine, we report on some of the bugs found and synthesize some testing patterns that proved to be useful at testing STM engines.