Análise experimental do comportamento à flexão de vigas de betão armado reforçadas com armaduras pós-instaladas de aço inoxidável

Citation:
Análise experimental do comportamento à flexão de vigas de betão armado reforçadas com armaduras pós-instaladas de aço inoxidável, Franco, Noel, Chastre Carlos, and Biscaia Hugo , TEST&E 2016 - 1º Congresso de Ensaios e Experimentação em Engenharia Civil, 4-6 July 2016, IST, Lisbon, Portugal, p.8, (2016) copy at https://docentes.fct.unl.pt/cmcr/publications/analise-experimental-do-comportamento-flexao-de-vigas-de-betao-armado-reforcadas-c

Date Presented:

4-6 July 2016

Abstract:

A procura de soluções de reforço mais eficientes que permitam aumentar a capacidade resistente de elementos estruturais sujeitos a flexão levou ao desenvolvimento de um sistema inovador de aplicação de armaduras de reforço coladas pelo exterior. Neste artigo descrevem-se os ensaios experimentais realizados e analisam-se os resultados obtidos com vigas de betão armado reforçadas com armaduras pós-instaladas de aço inoxidável com diferentes técnicas: Externally Bonded Reinforcement (EBR), Near Surface Mounted (NSM) e com o novo sistema de reforço desenvolvido - Continuous Reinforcement Embedded at Ends (CREatE). As vigas ensaiadas monotonicamente até à rotura em flexão de quatro pontos têm seção transversal em T e um vão livre de três metros. No novo sistema de reforço as armaduras são ancoradas por aderência no interior do elemento estrutural, o que associado à utilização de armaduras em aço inoxidável, possibilita aumentos de resistência e ductilidade consideráveis face às técnicas tradicionais de colagem pelo exterior.

Notes:

Referências:
[1] Chen, J., and Teng, J., “Anchorage Strength Models for FRP and Steel Plates Bonded to Concrete,” Journal of Structural Engineering, vol. 127, no. 7, 2001, pp. 784-791.
[2] Franco, N., Chastre Rodrigues, C., and Biscaia, H. C., “Análise do desempenho à flexão de vigas de betão armado reforçadas com armaduras de aço inoxidável,” in JPEE2014 – 5ª Jornadas Portuguesas de Engenharia de
Estruturas, Encontro Nacional Betão Estrutural 2014, Lisboa, 2014.
[3] Matthys, S., and Taerwe, L., “Evaluation of ductility requirements in current design guidelines for FRP strengthening,” Cement and Concrete Composites, vol. 28, no. 10, 2006, pp. 845-856.
[4] Macdonald, M. D., and Calder, A. J. J., “Bonded steel plating for strengthening concrete structures,” International Journal of Adhesion and Adhesives, vol. 2, no. 2, 1982, pp. 119-127.
[5] Theillout, J., “Reinforcement et reparation des ouvrages d'art par la technique des toles collees,” A L'ecole Nationale Des Ponts Et Chaussees, 1983.
[6] Oehlers, D., and Moran, J., “Premature failure of externally plated reinforced concrete beams,” Journal of Structural Engineering, vol. 1161990, pp. 17.
[7] Chastre Rodrigues, C., “Comportamento da Ligação Aço-Resina-Betão em Elementos Estruturais,” MSc, Engenharia Civil - IST, Instituto Superior Técnico, 1993.
[8] Oehlers, D., and Ali, M., “Debonding of steel plates glued to RC flexural members,” Structural Engineering and Materials, vol. 11998, pp. 7.
[9] Focacci, F., Nanni, A., and Bakis, C., “Local bond-slip relationship for FRP reinforcement in concrete,” Journal of Composites for Construction, vol. 4, no. 1, 2000, pp. 24-31.
[10] Smith, S. T., and Teng, J. G., “Interfacial stresses in plated beams,” Engineering Structures, vol. 23, no. 7, 2001, pp. 857-871.
[11] Chen, J. F., Yuan, H., and Teng, J. G., “Debonding failure along a softening FRP-to-concrete interface between two adjacent cracks in concrete members,” Engineering Structures, vol. 29, no. 2, 2007, pp. 259-270.
[12] Chen, F., and Qiao, P., “Debonding analysis of FRP–concrete interface between two balanced adjacent flexural cracks in plated beams,” International Journal of Solids and Structures, vol. 46, no. 13, 2009, pp. 2618-2628.
[13] Biscaia, H. E. C. C., “Comportamento e modelação da ligação GFRP/Betão em elementos de betão expostos a ambientes agressivos,” PhD, Engenharia Civil - Faculdade de Ciências e Tecnologia, Universidade Nova de
Lisboa, 2012.
[14] Houachine, H. R. E., Sereir, Z., Kerboua, B., and Hadjazi, K., “Combined cohesive-bridging zone model for prediction of the debonding between the FRP and concrete beam interface with effect of adherend shear
deformations,” Composites Part B: Engineering, vol. 45, no. 1, 2013, pp. 871-880.
[15] Biscaia, H., Silva, M. G., and Chastre, C., “Factors influencing the performance of externally bonded reinforcement systems of GFRP-to-concrete interfaces,” Materials and Structures2014, pp. 1-21.
[16] Biscaia, H. C., Chastre, C., and Silva, M. A. G., “Modelling GFRP-to-concrete joints with interface finite elements with rupture based on the Mohr-Coulomb criterion,” Construction and Building Materials, vol. 47, no. October
2013, pp. 261-273.
[17] Biscaia, H. C., Chastre, C., and Silva, M. A. G., “A smeared crack analysis of reinforced concrete T-beams strengthened with GFRP composites,” Engineering Structures, vol. 56, no. November 2013, pp. 1346-1361.
[18] Biscaia, H. C., Chastre, C., and Silva, M. A. G., “Nonlinear numerical analysis of the debonding failure process of FRP-to-concrete interfaces,” Composites Part B: Engineering, vol. 50, no. July, 2013, pp. 210-223.
[19] Biscaia, H. C., Chastre, C., and Silva, M. A. G., “Linear and nonlinear analysis of bond-slip models for interfaces between FRP composites and concrete,” Composites Part B: Engineering, vol. 45, no. 1, 2013, pp. 1554-1568.
[20] Biscaia, H. C., Chastre, C., and Silva, M. A. G., “Double shear tests to evaluate the bond strength between GFRP/concrete elements,” Composite Structures, vol. 94, no. 2, 2012, pp. 681-694.
[21] EuroInox, Stainless Steel: Tables of Technical Properties, vol. 5, 2007.
[22] EuroInox, Design Manual for Structural Stainless Steel - Commentary vol. 11, 2007.
[23] Smith, F. N., “Stainless steel reinforcement for concrete construction,” in 12th Middle East Corrosion Conference & Exhibition, Bahrain, 2008.
[24] Cunat, P.-J., “Corrosion Resistance of Stainless Steels in Soils and in Concrete,” in Plenary Days of the Committee on the Study of Pipe Corrossion and Protection, Ceocor, Biarritz, 2001.
[25] McGurn, J. F., “Satinless Steel Reinforcing bars in concrete,” 1999.
[26] Outokumpu Stainless, A., "Handbook of Stainless Steel," O. Oyj, ed., 2013.
[27] Chastre Rodrigues, C., Biscaia, H. C., Franco, N., and Monteiro, A. J., Structural strengthening system with internally anchored reinforcements by adherence Portugal, WIPO, 2015.

PreviewAttachmentSize
teste2016_-_01067_-_noel.pdf176.55 KB