Export 298 results:
Sort by: Author Title Type [ Year  (Desc)]
2012
Santin, E., L. B. Oliveira, and J. Goes. "Fast and accurate estimation of gain and sample-time mismatches in time-interleaved ADCs using on-chip oscillators." Circuits and Systems (ISCAS), 2012 IEEE International Symposium on. IEEE, 2012. 3154-3157. Abstract
n/a
-, Rogério Campos, Anikó Costa, and Lu{\'ı}s Gomes. "Finding Learning Paths Using Petri Nets Modeling Applicable to E-Learning Platforms." Technological Innovation for Value Creation - Third {IFIP} {WG} 5.5/SOCOLNET Doctoral Conference on Computing, Electrical and Industrial Systems, DoCEIS 2012, Costa de Caparica, Portugal, February 27-29, 2012. Proceedings. 2012. 151-160. Abstract
n/a
Pinheiro, B. A., J. L. A. Bras, S. Najmudin, AL Carvalho, LMA Ferreira, JAM Prates, and CMGA Fontes. "Flexibility and specificity of the cohesin-dockerin interaction: implications for cellulosome assembly and functionality." Biocatalysis and Biotransformation. 30 (2012): 309-315. AbstractWebsite

Cellulosomes are highly elaborate multi-enzyme complexes of Carbohydrate Active enZYmes (CAZYmes) secreted by cellulolytic microorganisms, which very effectively degrade the most abundant polymers on Earth, cellulose and hemicelluloses. Cellulosome assembly requires that a non-catalytic dockerin module found in cellulosomal enzymes binds to one of the various cohesin domains located in a large molecular scaffold called Scaffoldin. A diversity of cohesin -dockerin binding specificities have been described, the combination of which may result in complex plant cell wall degrading systems, maximising the synergy between enzymes in order to improve catalytic efficiency. Structural studies have allowed the spatial flexibility inherent to the cellulosomal system to be determined. Recent progress achieved from the study of the fundamental cohesin and dockerin units involved in cellulosome assembly will be reviewed.

2011
D, Aurelio, Grilo A, and Cruz-Machado V. "A Framework for Evaluating Lean Implementation Appropriateness." 2011 IEEE INTERNATIONAL CONFERENCE ON INDUSTRIAL ENGINEERING AND ENGINEERING MANAGEMENT (IEEM). 1 (2011): 779-783. Abstract
n/a
Moniz, António Brandão From the Lisbon strategy to EU2020: illusion or progress for european economies?. Universidade Nova de Lisboa, IET-Research on Enterprise and Work Innovation, Faculty of Science and Technology, 2011. Abstract

The majority of papers published in the last decades on European Union policy strongly stress the importance of the so-called Lisbon Strategy approved in the year 2000. The same applies to studies and reports on the shift of the European countries towards modernisation and restructuring policy in recent years. This EU development strategy defines a new direction for the coordination of national policies. But why has it become so important? One of the reasons is the fact that many of the papers are based on the concept of “knowledge society” as the key driver for an increased competitiveness of all political and economic regions of Europe. In this context, the term “knowledge” means the inter-linkage of education (including training, qualification, skills) and innovation (including research, information and communication). The use of the concept represents an important shift in the European strategy: further development would not only be based on investment in material infrastructures, but also more on the immaterial ground. However, this Lisbon Strategy was criticised by many politicians and opinion-makers in the first years of this century because the European structures were not prepared for such a quick change. At the same time, the focus for investment moved away from the traditional support of industrial sectors (manufacturing, agriculture and fisheries, construction) towards the “new economy” sectors. The vision of a knowledge society remained appealing also in a changing international context: the Middle East wars (Afghanistan, Iraq and Israel-Palestine) and the fast growth of the Chinese economy. However, the shadows of new recessions have strongly questioned the options made by the European Council. New challenges have emerged with the need to redefine collective strategies in terms of European development as set by the Lisbon strategy. “Europe 2020” is one more attempt to define a new strategy. But at present no clear path has been identifi

J, Gandra, Miranda R, Vilaca P, Velhinho A, and Teixeira JP. "Functionally graded materials produced by friction stir processing." JOURNAL OF MATERIALS PROCESSING TECHNOLOGY. 211 (2011): 1659-1668. Abstract
n/a
Barros, M. T., AI Mouquinho, K. T. Petrova, M. D. Saavedra, and J. C. Sotomayor. "Fast synthesis employing a microwave assisted neat protocol of new monomers potentially useful for the preparation of PDLC films." Cent. Eur. J. Chem. 9.4 (2011): 557-566. DOI: 10.2478/s11532-011-0046-2.
Mouquinho, A., M. Saavedra, A. Maiau, K. T. Petrova, M. T. Barros, J. L. Figueirinhas, and J. Sotomayor. "Films based on new methacrylate monomers: synthesis, characterisation and electro-optical properties." Mol. Cryst. Liq. Cryst. 542.1 (2011): 132-140. DOI: 10.1080/15421406.2011.570154.
Gray, R. D., and A. Malheiro. "Finite complete rewriting systems for regular semigroups." Theor. Comput. Sci.. 412 (2011): 654-661. AbstractWebsite

It is proved that, given a (von Neumann) regular semigroup with finitely many left and right ideals, if every maximal subgroup is presentable by a finite complete rewriting system, then so is the semigroup. To achieve this, the following two results are proved: the property of being defined by a finite complete rewriting system is preserved when taking an ideal extension by a semigroup defined by a finite complete rewriting system; a completely 0-simple semigroup with finitely many left and right ideals admits a presentation by a finite complete rewriting system provided all of its maximal subgroups do.

Capsoni, A., and M. Vicente da Silva. "A finite element formulation of Mindlin plates for limit analysis." Numerical Methods in Biomedical Engineering. 27 (2011): 143-156.
Ortigueira, Manuel D. Fractional Calculus for Scientists and Engineers. Springer, 2011.
Freitas, F., V. D. Alves, C. A. V. Torres, M. Cruz, I. Sousa, M. J. Melo, A. M. Ramos, and M. A. M. Reis. "Fucose-containing exopolysaccharide produced by the newly isolated Enterobacter strain A47 DSM 23139." Carbohydrate Polymers . 83 (2011): 159-165.freitas_2011_carb_pol_83_159-165.pdf
Lewandowski, B., A. Listkowski, K. T. Petrova, and S. Jarosz. "Functionalisation of terminal positions of sucrose - Part II: Preparation of 1’,2,3,3’,4,4’-hexa-O-benzyl sucrose and 6,6’-bis-O-(2-hydroxyethyl)-1’,2,3,3’,4,4’-hexa-O-benzylsucrose." Carbohydrate Chemistry: Proven Synthetic Methods. Ed. P. Kovac. Taylor & Francis Group: CRC Press, 2011. 407-425.
Sebastião, PJ, A. Gradisek, LFV Pinto, T. Apih, M. H. Godinho, and M. Vilfan. "Fast field-cycling NMR relaxometry study of chiral and nonchiral nematic liquid crystals." The Journal of Physical Chemistry B. 115.49 (2011): 14348-14358. Abstract
n/a
Adams, TL, M. J. Polcyn, O. Mateus, DA Winkler, and LL Jacobs. "First occurrence of the long-snouted crocodyliform Terminonaris (Pholidosauridae) from the Woodbine Formation (Cenomanian) of Texas." Journal of Vertebrate Paleontology. 31 (2011): 712-716. Abstract
n/a
Sena, C., M. H. Godinho, PJ Sebastião, D. Sousa, and AM Figueiredo Neto. "Free-standing urethane/urea elastomer films undoped and doped with ferro-nano-particles." The European Physical Journal E. 34.1 (2011): 1-11. Abstract
n/a
Santin, E., L. B. Oliveira, B. Nowacki, and J. Goes. "A Fully Integrated and Reconfigurable Architecture for Coherent Self-Testing of High Speed Analog-to-Digital Converters." Circuits and Systems I: Regular Papers, IEEE Transactions on. 58 (2011): 1531-1541. Abstract
n/a
2010
Karlovich, Alexei Yu, Helena Mascarenhas, and Pedro A. Santos. "Finite section method for a Banach algebra of convolution type operators on Lp(R) with symbols generated by PC and SO." Integral Equations and Operator Theory. 67.4 (2010): 559-600. AbstractWebsite

We prove necessary and sufficient conditions for the applicability of the finite section method to an arbitrary operator in the Banach algebra generated by the operators of multiplication by piecewise continuous functions and the convolution operators with symbols in the algebra generated by piecewise continuous and slowly oscillating Fourier multipliers on \(L^p(\mathbb{R})\), \(1 < p < \infty\).

Costa, J., M. Fernandes, M. Vieira, G. Lavareda, CN Carvalho, and A. Karmali. "Field Effect and Light-Assisted a-Si:H Sensors for Detection of Ions in Solution." SENSOR LETTERS. 8 (2010): 493-496. Abstract

In this paper we present an amorphous silicon device that can be used in two operation modes to measure the concentration of ions in solution. While crystalline devices present a higher sensitivity, their amorphous counterpart present a much lower fabrication cost, thus enabling the production of cheap disposable sensors for use, for example, in the food industry. The devices were fabricated on glass substrates by the PECVD technique in the top gate configuration, where the metallic gate is replaced by an electrolytic solution with an immersed Ag/AgCl reference electrode. Silicon nitride is used as gate dielectric enhancing the sensitivity and passivation layer used to avoid leakage and electrochemical reactions. In this article we report on the semiconductor unit, showing that the device can be operated in a light-assisted mode, where changes in the pH produce changes on the measured ac photocurrent. In alternative the device can be operated as a conventional ion selective field effect device where changes in the pH induce changes in the transistor's threshold voltage.

Costa, J., M. Fernandes, M. Vieira, G. Lavareda, CN Carvalho, and A. Karmali. "Field Effect and Light-Assisted a-Si:H Sensors for Detection of Ions in Solution." SENSOR LETTERS. 8 (2010): 493-496. Abstract

In this paper we present an amorphous silicon device that can be used in two operation modes to measure the concentration of ions in solution. While crystalline devices present a higher sensitivity, their amorphous counterpart present a much lower fabrication cost, thus enabling the production of cheap disposable sensors for use, for example, in the food industry. The devices were fabricated on glass substrates by the PECVD technique in the top gate configuration, where the metallic gate is replaced by an electrolytic solution with an immersed Ag/AgCl reference electrode. Silicon nitride is used as gate dielectric enhancing the sensitivity and passivation layer used to avoid leakage and electrochemical reactions. In this article we report on the semiconductor unit, showing that the device can be operated in a light-assisted mode, where changes in the pH produce changes on the measured ac photocurrent. In alternative the device can be operated as a conventional ion selective field effect device where changes in the pH induce changes in the transistor's threshold voltage.

Mateus, O., G. Dyke, N. Motchurova-Dekova, P. Ivanov, and GD Kamenov. "The first record of a dinosaur from Bulgaria." Lethaia. 43 (2010): 88-94. Abstractmateus_et_al__2010_the_first_record_of_a_dinosaur_in_bulgaria._lethaia.pdfWebsite

A portion of a left humerus from the Upper Maastrichtian of Vratsa district (NW Bulgaria)
is shown to be from a non-avian theropod dinosaur: this is the first record of a
dinosaur from Bulgaria. We describe this bone, suggest that it most likely pertains to an
ornithomimosaur, and discuss the fossil record of other similar taxa of Late Cretaceous
age that have been reported from Europe. To investigate the taphonomy of this fossil,
rare earth element (REE) analysis is combined with strontium (Sr) isotope data to confirm
that this Bulgarian dinosaur bone was initially fossilized in a terrestrial environment,
then later re-worked into late Maastrichtian marine sediments.

Mateus, O., and J. Milan. "First records of crocodyle and pterosaur tracks in the Upper Jurassic of Portugal." New Mexico Museum of Natural History and Science Bulletin. 51 (2010): 83-87. Abstractmateus_and_milan_2010_portugal_first_records_of_crocodyle_and_pterosaur_tracks_in_the_upper_jurassic_of_portugal.pdfWebsite

The Upper Jurassic of Portugal has a rich vertebrate fauna well documented from both body and trace fossils. Although the occurrence of crocodyles and pterosaurs is well documented from body fossils, trace fossils from both groups were unknown until now. Here we describe an isolated crocodyle-like track from Praia da Peralta and pterosaur tracks from the Kimmeridgian of Pedreira do Avelino, Sesimbra (Azóia Fm.) and Porto das Barcas, Lourinhã (Lourinhã Fm.). An enigmatic track suggests the possible presence of a small, tail-dragging tetrapod.
Possible track-makers are suggested based on the known Late Jurassic vertebrate fauna of Portugal.

Mateus, Octávio. "First records of crocodyle and pterosaur tracks in the Upper Jurassic of Portugal." New Mexico Museum of Natural History and Science Bulletin. 51 (2010): 83-87. Abstract

The Upper Jurassic of Portugal has a rich vertebrate fauna well documented from both body and trace fossils. Although the occurrence of crocodyles and pterosaurs is well documented from body fossils, trace fossils from both groups were unknown until now. Here we describe an isolated crocodyle-like track from Praia da Peralta and pterosaur tracks from the Kimmeridgian of Pedreira do Avelino, Sesimbra (Azóia Fm.) and Porto das Barcas, Lourinhã (Lourinhã Fm.). An enigmatic track suggests the possible presence of a small, tail-dragging tetrapod. Possible track-makers are suggested based on the known Late Jurassic vertebrate fauna of Portugal.