n/a

n/a

This work's aim is to report for the first time the cubic to hexagonal phase transition in tin-doped In2O3 films with a Sn/In atomic ratio of 0.03, fabricated at low temperature and normal pressure from alcoholic solution of InCl3 and SnCl4. The performed X-ray diffraction measurements show a difference between crystallographic symmetry of thin (100 nm) and thick (400 nm) films prepared in the same conditions: the structure of thick films can be related to high pressure In2O3 hexagonal system with a preferred orientation of c-axis parallel to the substrate surface, while thin films present a cubic symmetry with columnar (400) grain orientation. Phase transition nature is connected with non-axial tensile deformation of indium oxide grid due to insertion of chlorine ions in the position of two diagonally opposite oxygen vacancies in In2O3 network.

n/a

n/a

n/a

n/a

n/a

n/a

n/a

n/a

n/a

We discuss the problem of building domain oriented environments by a composition of heterogeneous application components and tools. We describe several individual tools that support such environments, namely a distributed monitoring and control tool (DAMS), a process-based distributed debugger (PDBG) and a heterogeneous interconnection model (PHIS). We discuss our experience with the development of a Problem Oriented Environment in the domain of genetic algorithms, obtained by a composition of heterogeneous tools and application components.

We discuss debugging prototypes that can easily support new functionalities, depending on the requirements of high-level computational models, and allowing a coherent integration with other tools in a software engineering environment. Concerning the first aspect, we propose a framework that identifies two distinct levels of functionalities that should be supported by a parallel and distributed debugger using: a process and thread-level, and a coordination level concerning sets of processes or threads. An incremental approach is used to effectively develop prototypes that support both functionalities. Concerning the second aspect, we discuss how the interfacing with other tools has influenced the design of a process-level debugging interface (PDBG) and a distributed monitoring and control layer called (DAMS).

n/a

n/a

n/a

n/a

We have deposited by Plasma Enhanced Chemical Vapour Deposition phosphorus doped amorphous and microcrystalline silicon films, as a function of the RF power (10-300 W), using a PH3/(SiH4 + H2 + He)mixture. It was found that films microcrystallization occurs for powers above 130 W, where a clear phase transition occurs. The microcrystalline films produced present high dark conductivities and optical band gaps, where the crystalline volume fraction is above 25%, as revealed by micro Raman spectroscopy. The Hall mobility have been also determined for amorphous and microcrystalline films, as a function of temperature, in the range 280-340 K. The data show that for the microcrystalline films the conduction is mainly in the extended states of the microcrystals, confirming also the double sign anomaly. That is, for n-type films, the sign is positive for the amorphous case while it is negative for the microcrystalline case. © 1998 Elsevier Science S.A.

We present the modelling of a new two-terminal and low-voltage operating optoelectronic device based on MIS silicon structure with multichannel insulator and having as gate a transparent metallic tin-doped indium oxide (ITO) layer deposited by spray pyrolysis technique over the insulator layer. ITO layer has a multiple non-rectifier electrical contact with silicon substrate, in the SiO2 channel's region. Construction details of the process, together with its operating characteristics are given. The devices developed do not require external active electronic components (transistors, microschemes) to execute their functions and to transform analogue input optical signals to digital output form, highly important for a wide range of optoelectronic applications.

n/a

n/a

n/a

In this paper we report the success in fabricating FTO/Si surface-barrier photodiodes produced by spray pyrolysis deposition technique, under ambient conditions. Three types of photodetectors for low-voltage-bias operation were developed based on high-resistivity silicon: 1. X-Ray detectors with energy resolution of 16.5% at 661.5 keV (137Cs source), consisting of surface-barrier PIN photodiode with an active area of 50 mm2 operating at 5 V reverse bias, scintillator based on monocrystalline Bi4Ge3O12 and preamplifier (noise of 250 e- RMS.); 2. Fast-response surface-barrier FTO/n–n+ silicon epitaxial photodiodes, operating at 10 V bias with rise times of 2 ns at λ = 0.85 μm; 3. Radiation-resistant drift epitaxial surface-barrier PIN photodiodes for unbiased operating conditions, with an exponential impurity distribution in a 8 μm thick epitaxial layer. A built-in electrical field due to the carrier concentration distribution in the epitaxial layer provides a considerable improvement in the `critical fluence' value (3×1014 cm-2) for neutron irradiation.

We report the properties and optoelectronic applications of transparent and conductive indium and tin oxide films prepared by the spray pyrolysis method and doped with Sn or F, respectively. The film properties have been measured using X-ray diffraction, optical and electrical absorption. As examples of applications we produced a set of selective optical detectors for different spectral regions, covering the wavelength range from 0.25 to 1.1 μm, based on metal oxide-semiconductor heterostructures and using different substrates such as: GaP, GaSe, AlxGa1-xAs, GaAs and Si. The fabricated devices exhibit several features such as: production simplicity, high quantum efficiency, uniform sensitivity over the entire active area and a high response speed. Finally, we present a high quantum efficiency and solar blind monocrystalline zinc sulphide optical sensor fabricated by spray deposition as an alternative to the ultraviolet-enhanced SiC and GaN photodetectors and the performances of a solar cell. © 1998 Elsevier Science B.V. All rights reserved.