We study the most important processes for the creation of excited states in He-like through C- like praseodymium ions from the ions ground configurations, leading to the emission of K X-ray lines. Theoretical values for inner-shell excitation and ionization cross sections, transition probabilities and energies for the deexcitation processes, are calculated in the framework of the multi-configuration Dirac- Fock method, including QED corrections. Using these calculated values, a theoretical Kα X-ray spectrum is obtained, which is compared to recent experimental data obtained in the Livermore Super-EBIT electron beam ion trap facility.

Theoretical expressions for ionization cross sections by electron impact based on the binary encounter Bethe (BEB) model, valid from ionization threshold up to relativistic energies, are proposed.
The new modified BEB (MBEB) and its relativistic counterpart (MRBEB) expressions are simpler than the BEB (nonrelativistic and relativistic) expressions because they require only one atomic parameter, namely the binding energy of the electrons to be ionized, and use only one scaling term for the ionization of all sub-shells.
The new models are used to calculate the K-, L- and M-shell ionization cross sections by electron impact for several atoms with Z from 6 to 83. Comparisons with all, to the best of our knowledge, available experimental data show that this model is as good or better than other models, with less complexity.

n/a

n/a

n/a

Cancer is one of the main causes of death in the world and its incidence increases every day. Current treatments are insufficient and present many breaches. Hyperthermia is an old concept and since early it was established as a cancer treatment option, mainly in superficial cancers. More recently the concept of intracellular hyperthermia emerged wherein magnetic particles are concentrated at the tumor site and remotely heated using an applied magnetic field to achieve hyperthermic temperatures (42-45 degrees C). Many patents have been registered in this area since the year 2000. This review presents the most relevant information, organizing them according to the hyperthermic method used: 1) external RadioFrequency devices; 2) hyperthermic perfusion; 3) frequency enhancers; 4) apply heating to the target site using a catheter; 5) injection of magnetic and ferroelectric particles; 6) injection of magnetic nanoparticles that may carry a pharmacological active drug. The use of magnetic nanoparticles is a very promising treatment approach since it may be used for diagnostic and treatment. An ideal magnetic nanoparticle would be able to detect and diagnose the tumor, carry a pharmacological active drug to be delivered in the tumor site, apply hyperthermia through an external magnetic field and allow treatment monitoring by magnetic resonance imaging.

A successful procedure for the in situ synthesis of silver nanoparticles by chemical reduction of a silver salt on cotton and wool textiles is reported herein. The synthesis can be advantageously performed in an aqueous system when compared with an ethanolic system. SEM studies confirmed the presence of silver nanoparticles on the treated textiles, and elemental analysis by ICP revealed that, for the aqueous system, up to 3 and 4 mg of silver per gram were deposited per gram of cotton and wool fabric, respectively. This represented an increase of up to 16-fold for cotton and 3-fold for wool compared with the ethanolic system. Thus, the difference between the aqueous and ethanolic systems was more evident for cotton, albeit more silver was deposited on wool samples in all conditions. An increase in the amount of reducing agent present resulted in more silver being deposited on the textiles when using an aqueous system. The use of water presents a great advantage for possible scale-up of the method. This simple method can be applied to produce textiles for biomedical applications or presenting conductive properties. (C) 2012 Elsevier B.V. All rights reserved.

The potential advantage of using superconducting materials in electrical devices is well described in the literature. The electromagnetic properties of these materials make them unique for several applications, such as, e.g. electrical machines and drives, fault current applications, or superconducting magnetic energy storage. In the development of electromechanical conversion devices, superconducting materials are used foreseeing mainly a decrease in the device dimensions or a performance improvement for the same active volume. To guarantee a good application of this kind of materials it is important to describe and model the phenomena that characterize their operation under different regimes. In this paper, a study based in FEM simulations of a motor with bulk superconductor in the rotor is carried out, with the purpose of understand, quantify and qualify which phenomena are present in the different regimes of the motor, leading to obtaining an equivalent electrical circuit with lumped parameters.

n/a

n/a

n/a

n/a

High temperature superconducting (HTS) machines are recognized to offer several advantageous features when comparing to conventional ones. Amongst these, highlights the decrease in weight and volume of the machines, due to increased current density in conductors or the absence of iron slots' teeth; or the decrease in AC losses and consequent higher efficiency of the machines, even accounting for cryogenics. These concepts have been already demonstrated and some machines have even achieved commercial stage. In this paper, several alternative approaches are applied to electrical motors employing HTS materials. The first one is an all superconducting linear motor, where copper conductors and permanent magnets are replaced by Bi-2223 windings and trapped flux magnets, taking advantage of stable levitation due to flux pinning, higher current densities and higher excitation field. The second is an induction disk motor with Bi-2223 armature, where iron, ironless and hybrid approaches are compared. Finally, an innovative command strategy, consisting of an electronically variable pole pairs' number approach, is applied to a superconducting hysteresis disk motor. All these concepts are being investigated and simulation and experimental results are presented.

An equivalent model and electromechanical characteristics for the disk motor was obtained based on the Steinmetz parameters. This paper describes a series of tests conducted on an axial flux motor, equipped with an aluminum rotor disc and an YBCO high temperature superconducting rotor disc, at liquid nitrogen temperature (77 K). The rotating magnetic field was produced by a four-pole, three-phase stator winding, at 50 Hz. At asynchronous permanent regime, Steinmetz-type models are able to describe both motors' behavior. From the performed tests, the parameters of both motors' models were deduced. A variable load was used to obtain both motor's characteristics (conventional and superconducting). Experimental obtained characteristics of both motors are compared with the ones predicted from parameters' calculation. The HTS motor provides high efficiency then the conventional ones.

n/a

n/a

n/a

n/a

A new approach is laid out to investigate two-photon atomic transitions. It is based on the application of the finite-basis solutions constructed from the Bernstein polynomial (B-polynomial) sets. We show that such an approach provides a very promising route for the relativistic second-order (and even higher-order) calculations since it allows for analytical evaluation of the involved matrices elements. In order to illustrate possible applications of the method and to verify its accuracy, detailed calculations are performed for the 2 s 1/2 ‚Üí 1 s 1/2 transition in neutral hydrogen and hydrogen-like ions, which are compared with the theoretical predictions based on the well-established B-spline basis-set approach.

A new approach is laid out to investigate two-photon atomic transitions. It is based on the application of the finite-basis solutions constructed from the Bernstein polynomial (B-polynomial) sets. We show that such an approach provides a very promising route for the relativistic second-order (and even higher-order) calculations since it allows for analytical evaluation of the involved matrices elements. In order to illustrate possible applications of the method and to verify its accuracy, detailed calculations are performed for the 2 s 1/2 ‚Üí 1 s 1/2 transition in neutral hydrogen and hydrogen-like ions, which are compared with the theoretical predictions based on the well-established B-spline basis-set approach.

The final thermally stimulated discharge current method allows a better selection of the experimental conditions for sample polarization. By decreasing the ratio between the charging time and the discharging time, the apparent peak is of the same order of magnitude as the genuine peaks and there is only a partial overlap between then. Two peaks have been identified for polyamide 11, one associated with the glass transition around 60 degrees C and the second associated with the Curie transition around 96 degrees C.

The final thermally stimulated discharge current method allows a better selection of the experimental conditions for sample polarization. By decreasing the ratio between the charging time and the discharging time, the apparent peak is of the same order of magnitude as the genuine peaks and there is only a partial overlap between then. Two peaks have been identified for polyamide 11, one associated with the glass transition around 60 degrees C and the second associated with the Curie transition around 96 degrees C.

n/a

An equivalent model and electromechanical characteristics for the disk motor was obtained based on the Steinmetz parameters. This paper describes a series of tests conducted on an axial flux motor, equipped with an aluminum rotor disc and an YBCO high temperature superconducting rotor disc, at liquid nitrogen temperature (77 K). The rotating magnetic field was produced by a four-pole, three-phase stator winding, at 50 Hz. At asynchronous permanent regime, Steinmetz-type models are able to describe both motors' behavior. From the performed tests, the parameters of both motors' models were deduced. A variable load was used to obtain both motor's characteristics (conventional and superconducting). Experimental obtained characteristics of both motors are compared with the ones predicted from parameters' calculation. The HTS motor provides high efficiency then the conventional ones.