The magnetic and electrical properties of Ni implanted single crystalline TiO2 rutile were studied for nominal implanted fluences between 0.5?1017 cm−2 and 2.0?1017 cm−2 with 150 keV energy, corre- sponding to maximum atomic concentrations between 9 at{%} and 27 at{%} at 65 nm depth, in order to study the formation of metallic oriented aggregates. The results indicate that the as implanted crystals exhibit superparamagnetic behavior for the two higher fluences, which is attributed to the formation of nanosized nickel clusters with an average size related with the implanted concentration, while only paramagnetic behavior is observed for the lowest fluence. Annealing at 1073 K induces the aggregation of the implanted nickel and enhances the magnetization in all samples. The associated anisotropic behavior indicates preferred orientations of the nickel aggregates in the rutile lattice consistent with Rutherford backscattering spectrometry—channelling results. Electrical conductivity displays anisotropic behavior but no magnetoresistive effects were detected.

In this work Laponite was combined with a modified abundant natural polymer, (caboxymethyl cellulose), acrylic sodium salt polymer and lithium perchlorate aiming to produce inexpensive and sustainable nanocomposite electrolytes for functional electrochemical devices. Optical, electrochemical, structural, morphological and rheological characterization was performed in order to evaluate their properties and potential advantages as electrolyte. It was verified that the addition of Laponite led to an ionic conductivity at room temperature (25 C) in the range of 6 to 9 ?? 10- 5 Scm - 1 this value being then determined by the composition of the nanocomposite. These electrolytes were applied to electrochromic devices using evaporated nickel oxide thin film as the electrochromic layer. The devices exhibited a significant transmittance modulation that exceeds 45 {%} at 600 nm. ?? 2013 Elsevier B.V.

The spectra of localized surface plasmon resonances (LSPRs) in self-assembled silver nanoparticles (NPs), prepared by solid-state dewetting of thin films, are discussed in terms of their structural properties. We summarize the dependences of size and shape of NPs on the fabrication conditions with a proposed structural-phase diagram. It was found that the surface coverage distribution and the mean surface coverage (SC) size were the most appropriate statistical parameters to describe the correlation between the morphology and the optical properties of the nanostructures. The results are interpreted with theoretical predictions based on Mie theory. The broadband scattering efficiency of LSPRs in the nanostructures is discussed towards application as plasmon-enhanced back reflectors in thin-film solar cells.

Abstract.  The concept of intermediate band solar cell (IBSC) is, apparently, simple to grasp. However, since the idea was proposed, our understanding has improved and some concepts can now be explained more clearly than when the concept was initially introduced. Clarifying these concepts is important, even if they are well known for the advanced researcher, so that research efforts can be driven in the right direction from the start. The six pieces of this work are: Does a miniband need to be formed when the IBSC is implemented with quantum dots? What are the problems for each of the main practical approaches that exist today? What are the simplest experimental techniques to demonstrate whether an IBSC is working as such or not? What is the issue with the absorption coefficient overlap and the Mott's transition? What would the best system be, if any?

{Three new emissive 8-aminoquinoline derived probes (1)-(3) and one dinuclear Zn(II) complex (4) were synthesized and fully characterized. Their absorption spectra show maxima at 310-336 nm, and fluorescence emission between 456 and 498 nm. Compound (1) was characterized by single crystal X-ray diffraction. The effect upon Zn(II) and Cu(II) coordination to compounds (1)-(3) was studied by monitoring the changes in absorption and fluorescence spectra, and complemented by calculation of metal-ligand stability constants. The results indicate that compound (3) is the one that presents the most favorable geometry for coordinating two metal cations, fact that is confirmed by the synthesis of the dinuclear complex (4), with similar molecular geometry. (C) 2011 Elsevier B.V. All rights reserved.}

{Reaction of {[}Co(eta(5)-C5H5)(CO)(2)], 1, with 1,1'-bis(diphenylphosphino)ferrocene (dppf) yields the new trinuclear complex {[}Co(eta(5)-C5H5)(CO)](2)(mu-dppf), 2, which was structurally characterised by single crystal X-ray diffraction and showed two Co(eta(5)-C5H5)(CO) moieties covalently linked by a dppf bridge. Electrochemical studies in dichloromethane revealed that both Co(I) and Fe(II) in the precursors were oxidized to Co(II)/Co(III) and Fe(III), respectively. On the other hand, in 2 the two first oxidation waves were assigned to Co, the Fe(II) centre requiring a higher potential than in free dppf. DFT calculations showed that the HOMOs of 2 were localised in the Co fragments, owing to the destabilisation of the Co(eta(5)-C5H5)(CO) orbitals after binding dppf. (C) 2012 Elsevier B.V. All rights reserved.}

Purpose – The purpose of this paper is to explore the deployment of RFID technology in fashion supply chain management (FSCM). It highlights the contribution of RFID to FSCM, supporting faster logistics activities, with greater products quality, cheaper and with more responsiveness, improving customer satisfaction. Design/methodology/approach – An inductive theory building approach is used to develop a conceptual model for RFID deployment in the {FSCM} context. Secondary data analysis from a sample of six companies supports the identification and discussion of the real advantages, disadvantages and barriers felt by companies in a fashion supply chain when {RFID} technology is introduced. Findings – The logistics activities in the fashion supply chain where {RFID} technology is most widely deployed are: shipping operations, tracking of raw materials, semi-finished components and finished garments, collecting finished goods, handling processes, tracking containers, tracking products from factory to store, receiving operations, monitoring, and sorting of merchandise. In most cases, the tagging operation is performed at some stage in the production process and tag reading occurs at distribution centres or at stores. The main barrier identified to the deployment of {RFID} is the problem of interoperability. The costs associated with the technology are the main disadvantage pointed out by the companies. Practical implications – A conceptual framework is proposed exploring the {RFID} advantages and disadvantages across the fashion supply chain, the main barriers to its introduction and the fashion supply chain logistics activities in which {RFID} could be found. This represents an important contribution to companies in this industry to become more aware of {RFID.} Also, new companies which are thinking of introducing this technology could overcome its barriers easily, improving its advantages and minimizing its disadvantages. Originality/value – This paper explores the deployment of {RFID} in the fashion supply chain from the perspective of technology users.

The concentration of lead in liver and kidneys of Wistar rats, fed with lead since fetal period in relation to their age and to a control group, was determined. A group of rats was exposed to lead acetate (n=30) in drinking water and the other group was exposed to normal water (n=20). Samples were collected from rats aging between 1 and 11 months and were analyzed by Energy Dispersive X-ray Fluorescence (EDXRF) without any chemical preparation. The EDXRF results were assessed by the PIXE (Proton Induced X-ray Emission) technique. The formaldehyde used to preserve the samples was also analyzed by ETAAS (Electro-Thermal Atomic Absorption Spectrometry) in order to verify if there was any loss of lead from the samples to the formaldehyde. We found that the loss was not significant (<2%). Concerning the mean values of the lead concentration measured in the contaminated soft tissues, in liver they range from 6 to 22μgg(-1), and in kidneys from 44 to 79μgg(-1). The control rats show, in general, values below the EDXRF detection limit (2μgg(-1)). The ratio kidney/liver ranges from 2 to 10 and is strongly positively correlated with the age of the animals. A Spearman correlation matrix to investigate the correlation between elemental concentrations and the dependence of these concentrations with age showed that there is a strong positive correlation with age for lead in the liver but not in the kidney. The correlation matrix showed also that the concentration of lead in these two soft tissues is not correlated. The lead accumulation in liver is made by different plateaus that strongly decrease with age. It was verified the existence of two levels of accumulation in kidney, not very highlighted, which might be indicative of a maximum accumulation level for lead in kidney.

The concentration of lead in liver and kidneys of Wistar rats, fed with lead since fetal period in relation to their age and to a control group, was determined. A group of rats was exposed to lead acetate (n=30) in drinking water and the other group was exposed to normal water (n=20). Samples were collected from rats aging between 1 and 11 months and were analyzed by Energy Dispersive X-ray Fluorescence (EDXRF) without any chemical preparation. The EDXRF results were assessed by the PIXE (Proton Induced X-ray Emission) technique. The formaldehyde used to preserve the samples was also analyzed by ETAAS (Electro-Thermal Atomic Absorption Spectrometry) in order to verify if there was any loss of lead from the samples to the formaldehyde. We found that the loss was not significant (<2%). Concerning the mean values of the lead concentration measured in the contaminated soft tissues, in liver they range from 6 to 22μgg(-1), and in kidneys from 44 to 79μgg(-1). The control rats show, in general, values below the EDXRF detection limit (2μgg(-1)). The ratio kidney/liver ranges from 2 to 10 and is strongly positively correlated with the age of the animals. A Spearman correlation matrix to investigate the correlation between elemental concentrations and the dependence of these concentrations with age showed that there is a strong positive correlation with age for lead in the liver but not in the kidney. The correlation matrix showed also that the concentration of lead in these two soft tissues is not correlated. The lead accumulation in liver is made by different plateaus that strongly decrease with age. It was verified the existence of two levels of accumulation in kidney, not very highlighted, which might be indicative of a maximum accumulation level for lead in kidney.

Theoretical transition energies and probabilities for He-, Li and Be-like Praseodymium ions are calcu- lated in the framework of the multi-configuration Dirac-Fock method (MCDF), including QED corrections. These calculated values are compared to recent experimental data obtained in the Livermore SuperEBIT electron beam ion trap facility [1].

Theoretical transition energies and probabilities for He-, Li and Be-like Praseodymium ions are calcu- lated in the framework of the multi-configuration Dirac-Fock method (MCDF), including QED corrections. These calculated values are compared to recent experimental data obtained in the Livermore SuperEBIT electron beam ion trap facility [1].

n/a

This paper aims to study the influence of eco-innovation practices on eco-efficiency of business, which embraces environmental and economic performance. Four hypotheses are drawn up based on the existing literature in green supply chain and considering the business innovation. A survey questionnaire was used to collect data on a sample of {USA} and Portuguese innovative organizations. Multivariate statistics and Partial Least Squares ({PLS)} path modelling techniques were used to test the proposed hypothesis. The statistical analysis allows to conclude that there are differences between the eco-innovation practices deployed by organizations belonging to different sectors and with different sizes. Also, it was found that the level of implementation of the different eco-innovation practices by organizations influence the eco-efficiency of businesses.

TiO2 films with enhanced photosensitivity were deposited on alkali free glass substrates without intentional substrate heating by pulsed DC magnetron reactive sputtering with an average thickness of about 2 mu m. Three dyes, commercial N719 and two new organic dyes were impregnated in order to control the optical spectral selectivity of such films. The type of dye used proved to dramatically influence the device's response to radiation pulses. The practical breakthrough is the use of different dyes according to the region of the electromagnetic spectrum one wants to detect. Devices with photocurrent 6 orders of magnitude higher than the dark current (from similar to 2 x 10(-12) to 2 x 10(-6) A for a 100 V bias) were fabricated with a spectral response within the visible range of the electromagnetic spectrum. In addition, this approach is likely to allow for the fabrication of hybrid photodetectors on cheap heat sensible flexible polymeric substrates. (C) 2011 Elsevier B.V. All rights reserved.