Nanostructure characterization of high k materials by spectroscopic ellipsometry
- Citation:
- Pereira, L., Águas Fortunato Martins H. E. R. "Nanostructure characterization of high k materials by spectroscopic ellipsometry." Applied Surface Science. 253 (2006): 339-343.
Abstract:
In this work, the optical and structural properties of high k materials such as tantalum oxide and titanium oxide were studied by spectroscopic ellipsometry, where a Tauc-Lorentz dispersion model based in one (amorphous films) or two oscillators (microcrystalline films) was used. The samples were deposited at room temperature by radio frequency magnetron sputtering and then annealed at temperatures from 100 to 500 °C. Concerning the tantalum oxide films, the increase of the annealing temperature, up to 500 °C does not change the amorphous nature of the films, increasing, however, their density. The same does not happen with the titanium oxide films that are microcrystalline, even when deposited at room temperature. Data concerning the use of a four-layer model based on one and two Tauc-Lorentz dispersions is also discussed, emphasizing its use for the detection of an amorphous incubation layer, normally present on microcrystalline films grown by sputtering. © 2006 Elsevier B.V. All rights reserved.
Notes:
cited By 11
Recent Publications
