The interaction of light with wavelength-sized photonic nanostructures is highly promising for light management applied to thin-film photovoltaics. Several light trapping effects come into play in the wave optics regime of such structures that crucially depend on the parameters of the photonic and absorbing elements. Thus, multi-parameter optimizations employing exact numerical models, as performed in this work, are essential to determine the maximum photocurrent enhancement that can be produced in solar cells.Generalized spheroidal geometries and high-index dielectric materials are considered here to model the design of the optical elements providing broadband absorption enhancement in planar silicon solar cells. The physical mechanisms responsible for such enhancement are schematized in a spectral diagram, providing a deeper understanding of the advantageous characteristics of the optimized geometries. The best structures, composed of TiO2 half-spheroids patterned on the cells' top surface, yield two times higher photocurrent (up to 32.5 mA/cm2 in 1.5 $μ$m thick silicon layer) than the same devices without photonic schemes.These results set the state-of-the-art closer to the theoretical Lambertian limit. In addition, the considered light trapping designs are not affected by the traditional compromise between absorption enhancement versus current degradation by recombination, which is a key technological advantage.

A therapeutic deep eutectic system (THEDES) is here defined as a deep eutectic solvent (DES) having an active pharmaceutical ingredient (API) as one of the components. In this work, THEDESs are proposed as enhanced transporters and delivery vehicles for bioactive molecules. THEDESs based on choline chloride (ChCl) or menthol conjugated with three different APIs, namely acetylsalicylic acid (AA), benzoic acid (BA) and phenylacetic acid (PA), were synthesized and characterized for thermal behaviour, structural features, dissolution rate and antibacterial activity. Differential scanning calorimetry and polarized optical microscopy showed that ChCl:PA (1:1), ChCl:AA (1:1), menthol:AA (3:1), menthol:BA (3:1), menthol:PA (2:1) and menthol:PA (3:1) were liquid at room temperature. Dissolution studies in PBS led to increased dissolution rates for the APIs when in the form of THEDES, compared to the API alone. The increase in dissolution rate was particularly noticeable for menthol-based THEDES. Antibacterial activity was assessed using both Gram-positive and Gram-negative model organisms. The results show that all the THEDESs retain the antibacterial activity of the API. Overall, our results highlight the great potential of THEDES as dissolution enhancers in the development of novel and more effective drug delivery systems.

© 2016 Elsevier B.V. Upper urinary tract urothelial carcinoma (UTUC) accounts for 5–10{%} of urothelial carcinomas and is a disease that has not been widely studied as carcinoma of the bladder. To avoid the problems of conventional therapies, such as the need for frequent drug instillation due to poor drug retention, we developed a biodegradable ureteral stent (BUS) impregnated by supercritical fluid CO 2 (scCO 2 ) with the most commonly used anti-cancer drugs, namely paclitaxel, epirubicin, doxorubicin, and gemcitabine. The release kinetics of anti-cancer therapeutics from drug-eluting stents was measured in artificial urine solution (AUS). The in vitro release showed a faster release in the first 72 h for the four anti-cancer drugs, after this time a plateau was achieved and finally the stent degraded after 9 days. Regarding the amount of impregnated drugs by scCO 2 , gemcitabine showed the highest amount of loading (19.57 $μ$g drug /mg polymer: 2{%} loaded), while the lowest amount was obtained for paclitaxel (0.067 $μ$g drug /mg polymer : 0.01{%} loaded). A cancer cell line (T24) was exposed to graded concentrations (0.01–2000 ng/ml) of each drugs for 4 and 72 h to determine the sensitivities of the cells to each drug (IC 50 ). The direct and indirect contact study of the anti-cancer biodegradable ureteral stents with the T24 and HUVEC cell lines confirmed the anti-tumoral effect of the BUS impregnated with the four anti-cancer drugs tested, reducing around 75{%} of the viability of the T24 cell line after 72 h and demonstrating minimal cytotoxic effect on HUVECs.

Marine sponges are a rich source of natural bioactive compounds. One of the most abundant valuable products is collagen/gelatin, which presents an interesting alternative source for pharmaceutical and biomedical applications. We have previously proposed an innovative green technology for the extraction of collagen/gelatin from marine sponges based in water acidified with carbon dioxide. In this work, we have optimized the process operating conditions toward high yields and collagen quality as well as to reduce extraction procedure duration and energy consumption. The process extraction efficiency is higher than 50{%}, corresponding to a yield of approximately 10{%} of the sponge dry mass, obtained for mild operating conditions of 10 bar and 3 h. The extracted material was characterized by scanning electron microscopy (SEM), rheology, Fourier transformed infrared spectroscopy (FTIR), circular dichroism (CD), amino acid analysis, and SDS-PAGE. The extracts were found to be composed of highly pure mixtures of co...

BACKGROUND This study investigated the preparation of ordered patterned surfaces and/or microspheres from a natural-based polymer, using the breath figure and reverse breath figure methods. METHODS Poly(D,L-lactic acid) and starch poly(lactic acid) solutions were precipitated in different conditions - namely, polymer concentration, vapor atmosphere temperature and substrate - to evaluate the effect of these conditions on the morphology of the precipitates obtained. RESULTS The possibility of fine-tuning the properties of the final patterns simply by changing the vapor atmosphere was also demonstrated here using a range of compositions of the vapor phase. Porous films or discrete particles are formed when the differences in surface tension determine the ability of polymer solution to surround water droplets or methanol to surround polymer droplets, respectively. In vitro cytotoxicity was assessed applying a simple standard protocol to evaluate the possibility to use these materials in biomedical applications. Moreover, fluorescent microscopy images showed a good interaction of cells with the material, which were able to adhere on the patterned surfaces after 24 hours in culture. CONCLUSIONS The development of patterned surfaces using the breath figure method was tested in this work for the preparation of both poly(lactic acid) and a blend containing starch and poly(lactic acid). The potential of these films to be used in the biomedical area was confirmed by a preliminary cytotoxicity test and by morphological observation of cell adhesion.

© 2016 WILEY-VCH Verlag GmbH {&} Co. KGaA, Weinheim. This work presents a novel route toward porous scaffolds for tissue engineering and regenerative medicine (TERM) applications. Hybrid cryogels with gelatin, gellan gum, carboxymethylcellulose, and lignin were prepared by a two-step process. Textural properties of the cryogels were analyzed by SEM and micro-computed tomography. The results indicated that rapid freezing retained sample shape and yielded macroporous materials. The mechanical properties of the cryogels were characterized in compression mode. Cytotoxicity studies indicated that the hybrid-alginate cryogels did not present cytotoxicity and have the potential to be used in TERM.

© 2016 IOP Publishing Ltd. In this work, we focused on the potential of bioceramics from different marine sponges - namely Petrosia ficiformis, Agelas oroides and Chondrosia reniformis - for novel biomedical/industrial applications. The bioceramics from these sponges were obtained after calcination at 750 °C for 6 h in a furnace. The morphological characteristics were evaluated by scanning electron microscopy (SEM). The in vitro bioactivity of the bioceramics was evaluated in simulated body fluid (SBF) after 14 and 21 d. Observation of the bioceramics by SEM after immersion in SBF solution, coupled with spectroscopic elemental analysis (EDS), showed that the surface morphology was consistent with a calcium-phosphate (Ca/P) coating, similar to hydroxyapatite crystals (HA). Evaluation of the characteristic peaks of Ca/P crystals by Fourier transform infrared spectroscopy and x-ray diffraction further confirmed the existence of HA. Cytotoxicity studies were carried out with the different ceramics and these were compared with a commercially available Bioglass ® . In vitro tests demonstrated that marine bioceramics from these sponges are non-cytotoxic and have the potential to be used as substitutes for synthetic Bioglass ® .

© 2016 WILEY-VCH Verlag GmbH {&} Co. KGaA, Weinheim The post-deposition modification of ZnO-based transparent conductive oxides (TCOs) can be the key to produce thin films with optoelectronic properties similar to indium tin oxide (ITO), but at a much lower cost. Here, we present electro-optical results achieved for post-deposition annealing of Al–Zn–O (AZO), AZO:H, Ga–Zn–O:H (GZO:H), and Zn–O:H (ZNO:H) thin films deposited by RF sputtering at room temperature. These studies comprise results of thermal annealing at atmospheric pressure, vacuum, forming gas, H2and Ar atmospheres, and H2and Ar plasmas, which lead to significant enhancement of their electro-optical properties, which are correlated to morphological and structural improvements. The post-deposition annealing leads to an enhancement in resistivity above 40{%} for AZO, AZO:H, and GZO:H, reaching $\rho$ ≈ 2.6–3.5 × 10−4$Ømega$cm, while ZnO:H showed a lower improvement of 13{%}. The averaged optical transmittance in the visible region is about 89{%} for the investigated TCOs. Such results match the properties of state-of-art ITO ($\rho$ ≈ 10−4$Ømega$cm and transmittance in VIS range of 90{%}) employing much more earth-abundant materials.