The Late Triassic deposits in the Jameson Land Basin, central East Greenland, stand as a crucial fossil area, yielding a diverse Norian vertebrate fauna. This basin, situated at a palaeolatitude of 41° N on the northern rim of Pangea and bordered in the North by the Boreal Sea, was a hub of activity during the Late Triassic. A large ephemeral to perennial lake system developed in the central and eastern parts of the basin, with rivers transporting sediment from the uplands northwest of the basin. Our research focused on the microvertebrate remains recovered from an expedition to Jameson Land in 1991 which yielded significant findings. These specimens, meticulously photographed and listed in a catalogue, comprise 950 vertebrate remains. Notably, we have identified new taxa never described from the Late Triassic sediments of Greenland, including sharks (Lissodus, Rhomphaiodon), bony fish (Gyrolepis), and reptiles (Doswelliidae and Rhynchocephalia). The revision of two sphenodontians jaw fragments as Clevosauridae, in association with Lissodus lepagei, Lissodus cf. Lissodus minimus, Rhomphaiodon sp., Saurichthys sp., and Gyrolepis sp., which are taxa that are highly documented in Europe and Asia, confirms a relationship between faunas of Greenland and Eurasia during the Late Triassic, a statement previously based on macro vertebrate studies.

n/a

This paper presents a comprehensive study of the evidence for ancient tin mining at the Ervedosa mine (Vinhais, Portugal). The geological context of the site indicates a rich cassiterite (SnO2) deposit, which was subject to mining in the twentieth century. Some ancient mining and ore processing stone tools were recovered during the twentieth century mining operations, namely one hammer, one pounder, one flat anvil and five small tools used both as pounders and crushing anvils, evidencing prehistoric mining activities. XRF and SEM–EDS chemical analyses were performed on primary and secondary cassiterite samples from the mining site, demonstrating the abundance and chemical heterogeneity of the tin (Sn) ores. The stone tools can be ascribed to Bronze Age or, at the latest, Early Iron Age (2nd millennium to the first half of 1st millennium BCE) by comparison with similar tools from other Iberian and European archaeological contexts. High-resolution photogrammetric 3D models of the tools are made available in this study. The historical descriptions of the findings and the research made on the technical archives about the mine allowed correlating the tools to mining in a primary context, focused on rich quartz veins in granitic or greisen bedrock, rather than mining in a secondary context. XRF and SEM–EDS analyses performed on the stone material and on surface adherences support their identification as specific types of hard rocks, such as granite, amphibolite and quartzite, and allowed the detection of Sn-rich adherent particles, confirming their use for Sn-material processing. The potential relation between the cassiterite resources and the local later prehistoric (Bronze Age to Early Iron Age) settlement pattern is also discussed. The results raise awareness and provide relevant data about the existence of tin mining in primary contexts during later prehistoric times in the NW Iberian Peninsula.

The CREMA collaboration is pursuing a measurement of the ground-state hyperfine splitting (HFS) in muonic hydrogen (μp) with 1 ppm accuracy by means of pulsed laser spectroscopy to determine the two-photon-exchange contribution with 2×10-4 relative accuracy. In the proposed experiment, the μp atom undergoes a laser excitation from the singlet hyperfine state to the triplet hyperfine state, then is quenched back to the singlet state by an inelastic collision with a H2 molecule. The resulting increase of kinetic energy after the collisional deexcitation is used as a signature of a successful laser transition between hyperfine states. In this paper, we calculate the combined probability that a μp atom initially in the singlet hyperfine state undergoes a laser excitation to the triplet state followed by a collisional-induced deexcitation back to the singlet state. This combined probability has been computed using the optical Bloch equations including the inelastic and elastic collisions. Omitting the decoherence effects caused by the laser bandwidth and collisions would overestimate the transition probability by more than a factor of two in the experimental conditions. Moreover, we also account for Doppler effects and provide the matrix element, the saturation fluence, the elastic and inelastic collision rates for the singlet and triplet states, and the resonance linewidth. This calculation thus quantifies one of the key unknowns of the HFS experiment, leading to a precise definition of the requirements for the laser system and to an optimization of the hydrogen gas target where μp is formed and the laser spectroscopy will occur.

We present a new algorithm for solving large-scale unconstrained optimization problems that uses cubic models, matrix-free subspace minimization, and secant-type parameters for defining the cubic terms. We also propose and analyze a specialized trust-region strategy to minimize the cubic model on a properly chosen low-dimensional subspace, which is built at each iteration using the Lanczos process. For the convergence analysis we present, as a general framework, a model trust-region subspace algorithm with variable metric and we establish asymptotic as well as complexity convergence results. Preliminary numerical results, on some test functions and also on the well-known disk packing problem, are presented to illustrate the performance of the proposed scheme when solving large-scale problems.

The cyclic failure observed in structural components such as pipelines subjected to extreme loading conditions highlights some limitations concerning the application of existing fatigue damage models. The evaluation and prediction of this type of failure in these steel components under large-scale plastic yielding associated with high levels of stress triaxiality are not sufficiently known nor explored. This fatigue domain is conventionally called ultra-low-cycle fatigue (ULCF) and damage features are representative of both low-cycle fatigue (LCF) and monotonic ductile fracture. Thus, in order to understand the ULCF damage mechanisms both monotonic and LCF tests are required to get representative bounding damage information to model the material damage behaviour under such extreme loading conditions. This paper aims at exploring the Theory of Critical Distances (TCD) in the LCF and ULCF fatigue regimes, including the application of the point, line and area methods. The application of the TCD theories has not been explored so far in the ULCF fatigue regimes, despite its promising results in the LCF and high-cycle fatigue. An experimental program was carried out on several specimens’ geometries made of X52 piping steel. In detail, smooth plane specimens and notched plane specimens were cyclic loaded under tension/compression loading in order to obtain fatigue lives within the range of 101-104 cycles. In addition, cyclic bending tests on notched plane specimens were also incorporated in this study. Finite element simulations of all small-scale tests were conducted allowing to derive elastoplastic stress/strain fields along the potential crack paths. The numerical data were subjected to a post-processing in order to find characteristic lengths that can be treated as a fatigue property according to the TCD. A unified strain-life relation is proposed for the X52 piping steel together with a characteristic material length, consisting of a practical relation for pipeline strain-based design under extreme cyclic loading conditions.

This work studies the low-velocity impact response of 3D-printed layered structures made of thermoplastic materials (PLA and PETg), which form sacrificial claddings for impact protection. The analyzed structures are composed of crushable cellular cores placed in between terminal stiffening plates. The cores tessellate either honeycomb hexagonal unit cells, or hexagonal cells with re-entrant corners, with the latter exhibiting auxetic response. The given results highlight that the examined PETg protectors exhibit higher energy dissipation ratios and lower restitution coefficients, as compared to PLA structures that have the same geometry. It is concluded that PETg qualifies as an useful material for the fabrication of effective impact protection gear through ordinary, low-cost 3D printers.

Computational limit analysis methods invariably lead to the need to solve a mathematical programming problem. The alternating direction method of multipliers (ADMM) is one versatile and robust technique to solve non-linear convex optimization problems that has recently found applications in a wide range of fields. Its solution scheme, based on an operator splitting algorithm, is not only easy to implement but also suitable to efficiently solve large-scale variational problems. Starting from the ADMM framework, we derive a strict upper bound finite element formulation using a two-(primal)-field approximation, one for the velocity field and the other for the plastic strain rate field. Next, following a similar approach, we develop a novel strict lower bound formulation. Here, the two-(primal)-field model is based on a redundant approximation of the stress field. Duality principles are then explored in order to unify these two formulations.The effectiveness of this approach is demonstrated on test problems and, to conclude, some considerations are made about the performance results.