Gravity loads can affect a reinforced concrete structure’s response to seismic actions, however, traditional procedures for testing the beam behaviour do not take this effect into consideration. An experimental campaign was carried out in order to assess the influence of the gravity load on RC beam connection to the column subjected to cyclic loading. The experiments included the imposition of a conventional quasi-static test protocol based on the imposition of a reverse cyclic displacement history and of an alternative cyclic test procedure starting from the gravity load effects. The test results are presented, compared and analysed in this paper. The imposition of a cyclic test procedure that included the gravity loads effects on the RC beam ends reproduces the demands on the beams’ critical zones more realistically than the traditional procedure. The consideration of the vertical load effects in the test procedure led to an accumulation of negative (hogging) deformation. This phenomenon is sustained with the behaviour of a portal frame system under cyclic loads subject to a significant level of the vertical load, leading to the formation of unidirectional plastic hinges. In addition, the hysteretic behaviour of the RC beam ends tested was simulated numerically using the nonlinear structural analysis software – OpenSees. The beam–column model simulates the global element behaviour very well, as there is a reasonable approximation to the hysteretic loops obtained experimentally.

Theropod dinosaurs form a highly diversified clade, and their teeth are some of the most common components of the Mesozoic dinosaur fossil record. This is the case in the Lourinhã Formation (Late Jurassic, Kimmeridgian-Tithonian) of Portugal, where theropod teeth are particularly abundant and diverse. Four isolated theropod teeth are here described and identified based on morphometric and anatomical data. They are included in a cladistic analysis performed on a data matrix of 141 dentition-based characters coded in 60 taxa, as well as a supermatrix combining our dataset with six recent datamatrices based on the whole theropod skeleton. The consensus tree resulting from the dentition-based data matrix reveals that theropod teeth provide reliable data for identification at approximately family level. Therefore, phylogenetic methods will help identifying theropod teeth with more confidence in the future. Although dental characters do not reliably indicate relationships among higher clades of theropods, they demonstrate interesting patterns of homoplasy suggesting dietary convergence in (1) alvarezsauroids, therizinosaurs and troodontids; (2) coelophysoids and spinosaurids; (3) compsognathids and dromaeosaurids; and (4) ceratosaurids, allosauroids and megalosaurids.

Based on morphometric and cladistic analyses, the biggest tooth from Lourinhã is referred to a mesial crown of the megalosaurid Torvosaurus tanneri, due to the elliptical cross section of the crown base, the large size and elongation of the crown, medially positioned mesial and distal carinae, and the coarse denticles. The smallest tooth is identified as Richardoestesia, and as a close relative of R. gilmorei based on the weak constriction between crown and root, the “eight-shaped” outline of the base crown and, on the distal carina, the average of ten symmetrically rounded denticles per mm, as well as a subequal number of denticles basally and at mid-crown. Finally, the two medium-sized teeth belong to the same taxon and exhibit pronounced interdenticular sulci between distal denticles, hooked distal denticles for one of them, an irregular enamel texture, and a straight distal margin, a combination of features only observed in abelisaurids. They provide the first record of Abelisauridae in the Jurassic of Laurasia and one of the oldest records of this clade in the world, suggesting a possible radiation of Abelisauridae in Europe well before the Upper Cretaceous.

Apresentam-se neste artigo os resultados dos ensaios realizados à escala real de um conjunto de vigas de betão armado com secção em T, levados a cabo para avaliar o desempenho das armaduras de aço inoxidável no reforço à flexão de vigas de betão armado com armaduras pós-instaladas aplicadas com as técnicas de reforço EBR (Externally Bonded Reinforcement), NSM (Near Surface Mounted) e EBR com ancoragens metálicas nas extremidades. Os ensaios realizados demonstraram que as técnicas de reforço utilizadas permitem aumentar a rigidez à flexão em regime elástico. Porém, a viga reforçada através da técnica EBR teve uma rotura prematura antes de atingir o valor da carga de cedência da viga não reforçada. Já as vigas reforçadas com as técnicas NSM e EBR com ancoragens mecânicas superaram o valor da carga de cedência da viga de referência, e as ancoragens mecânicas proporcionaram bastante ductilidade à viga reforçada com esta técnica.

n/a

Packaging waste collection systems are responsible to collect, within a geographic area, three types of packaging materials (paper, glass and plastic/metal) that are disposed by the final consumer into special bins. Those systems are often characterized by having a network with multiple depots that act as transfer and sorting stations, and where the vehicle fleet is based. However, each depot is often managed independently and not as a part of a unique system. In this work, four current tactical/operational practices that contribute to the independent management of each depot are analysed. The change of such practices is investigated and their impact assessed on the total collection cost. A solution methodology based on mathematical formulations is developed to plan service areas, vehicle routes and vehicle schedules taking into account new alternative solutions in managing the system as a whole. Such methodology is applied to a real case study of a company responsible for the collection of the packaging waste in 7 municipalities in mainland Portugal. New service areas, collection routes and vehicle schedules are defined and significant savings are obtained in terms of the total distance travelled as well as in terms of the number of required vehicles, resulting in a decreasing of the total system cost.

Pulsed field gradient spin echo high resolution magic angle spinning nuclear magnetic resonance spectroscopy is a powerful technique to characterize confined biosystems. We used this approach to assess the diffusion of solvent and reaction species within sol–gel matrices differing in enzyme loading.

n/a