Different glasses based on the ZnO-B2O3-SiO2 system, with a ZnO content ≥ 60 mol% and a fixed SiO2 content (20 mol%), were synthesised using a melt-quenching method. Glass samples with zinc oxide concentrations as high as 65 mol% were prepared successfully without deteriorating the glass-forming ability. The glass samples were submitted to controlled heat-treatments, and the effect of the ZnO/B2O3 molar ratio on the formation of crystalline phases within the glass matrix was investigated by means of differential thermal analysis (DTA), X-ray diffraction (XRD) and scanning electron microscopy (SEM). DTA results indicated that the glass transition and the onset crystallization temperatures of the studied glasses tended to increase with the increment on the ZnO/B2O3 ratio. XRD data showed that the zinc binary crystalline phases, willemite (Zn2SiO4), a zinc orthosilicate, and zinc borate (Zn3B2O6) could be present in the crystallized glasses, depending on the heat-treatment conditions. The formation of willemite was promoted by an increasing ZnO/B2O3 ratio. Microstructural observations performed by SEM indicated that under controlled experimental parameters (glass composition, heat-treatment temperature and time) the precipitation of nanocrystals within the glass matrix can be achieved, resulting in transparent and translucent willemite glass-ceramics. © 2016 Elsevier B.V. All rights reserved.

The precursor of the North Atlantic existed between the North American and Iberian blocks from the earliest Jurassic Hettangian and has been ever expanding since. By the Kimmeridgian and Tithonian, when much of the Morrison Fm rocks were deposited, the proto-Atlantic was more than 300 km wide at 27° paleolatitude between North America and Iberia. Macrovertebrate paleontology reveals a unique story to the isolation of Iberia and instead suggest a paleogeographic land connection between North American and Iberia. Torvosaurus, Allosaurus, Ceratosaurus, Stegosaurus, Supersaurus and others have a distribution restricted to Morrison Formation in North America and Lourinhã Formation in Portugal. A novel paleogeographic model is here suggested: (1) around the Middle–Late Jurassic transition there is a major palaeoceanographic and palaeoclimatic reorganization, coincidental to a major eustatic sea-level drop and uplift associated with the Callovian– Oxfordian Atlantic Regressive Event; (2) creating an ephemeral land bridge presenting a temporary opportunity for terrestrial gateways likely across the Flemish Cap and Galician Bank land masses, allowing large dinosaurian taxa to cross the northern proto-Atlantic in both directions; (3) finally, a Callovian–Oxfordian faunal exchange around the 163 Ma, through latest Kimmeridgian at 152 Ma (the age of equivalent genera in both Morrison and Portugal), is was an interval that allowed speciation, but retaining generic similarity of vertebrates. This model is consistent with the chronology and taxonomy required for speciation of the Iberian and American forms, exemplified by the coeval sister-taxa pairs Torvosaurus tanneri and T. gurneyi, Allosaurus fragilis and A. europaeus, or Supersaurus vivianae and S. lourinhanensis. While some of the smaller animals in the fauna show Morrison/Portugal affinities, most from Iberia have European or even Asian affinities. The larger-bodied fauna are more closely related to Morrison than to mainland Europe (except for dacentrurine stegosaurs). The body size differences and affinities of taxa across paleogeography is comparable to what is observed today across the Wallace Line. Migration may have also occurred in both directions. The closest relative of Torvosaurus is likely the European Bathonian Megalosaurus, thus the presence of the genus in North America represents a European migration. On other hand, Allosaurus and Supersaurus origins are consistent with a North American origin, representing an westto-east migration.

Abstract Due to the introduction of distributed renewable energy technologies with variable resource availability, the need of flexible electrical systems is evident. In general, flexibility is achieved from the supply side and often using carbon intensive energy generators. Therefore, improving the flexibility of the electrical system by taking advantage of renewable energy generation capacities and demand response measures in buildings is of major importance for a sustainable development. Control systems to implement these demand response measures need to quantify the flexibility of the respective buildings. Having this into consideration, this paper aims at presenting a literature review on methodologies to quantify the energy flexibility of buildings.

This study focuses on the assessment of the degradation processes occurring in three sandstone infills of fossilized Late Jurassic ornithopod tridactyl footprints, found in 2001 in a coastline cliff in Porto das Barcas (Lourinhã, Portugal) and exhibited in a museum display since 2004. These dinosaur footprints present nowadays severe decay phenomena compromising their physical integrity and are leading gradually to their loss of value. The deterioration patterns were recorded, a map of their distribution was prepared and several samples were collected both in the dinosaur footprints and in the coastline cliff. Different analytical procedures were applied such as XRD, FTIR, FESEM and Ion Chromatography. A microclimatic survey was also performed and air temperature and relative humidity was measured during eight months both indoor and also outdoor. The decay patterns observed are a combination intrinsic and extrinsic factors the stone material, namely swelling of clay minerals in the rock matrix (smectite and chlorite-smectite mixed-layer), presence of salts (mainly chlorides), application of past conservation treatments (poly(vinyl) acetate and epoxy resins) and with the museum’s indoor thermohygrometric conditions (mainly non-stable hygrometric conditions). This scientific knowledge is therefore essential to the sustainable preservation of this paleontological heritage.