The i* community has published guidelines, including model layout guidelines, for the construction of models. Our goal is to evaluate the effect of the layout guidelines on the i* novice stakeholders’ ability to understand and review i* models. We conducted a quasi-experiment where participants were given two understanding and two reviewing tasks. Both tasks involved a model with a bad layout and another model following the i* layout guidelines. We evaluated the impact of layouts by combining the success level in those tasks and the required effort to accomplish them. Effort was assessed using time, perceived complexity (with NASA TLX), and eye-tracking data. Participants were more successful in understanding than in reviewing tasks. However, we found no statistically significant difference in the success, time taken, or perceived complexity, between tasks conducted with models with a bad layout and models with a good layout. Most participants had little to no prior knowledge in i*, making them more representative of stakeholders with no requirements engineering expertise. They were able to understand the models fairly well after a short tutorial, but struggled when reviewing models. Adherence to the existing i* layout guidelines did not significantly impact i* model understanding and reviewing performance.

This paper presents a magnetic field three dimensional mapping produced by a threephase prototype for wireless power transfer. The presented magnetic field mapping is a contribution to improve the design of electric vehicles battery chargers using the wireless power transfer. To collect the magnetic field data, a prototype was built, in order to support the tests. The prototype primary is an electrical three-phase system that allows to be connected electrically and geometrically in star or delta. The losses due to the magnetic field dispersion and the generated interferences in the surrounding equipment or in human body are discussed. The different standards organizations related to electric vehicles battery chargers are presented. Finally the magnetic field influence on the human body is addressed.

Six quadrate bones, of which two almost certainly come from the Kem Kem beds (Cenomanian, Upper Cretaceous) of south-eastern Morocco, are determined to be from juvenile and adult individuals of Spinosaurinae based on phylogenetic, geometric morphometric, and phylogenetic morphometric analyses. Their morphology indicates two morphotypes evidencing the presence of two spinosaurine taxa ascribed to Spinosaurus aegyptiacus and? Sigilmassasaurus brevicollis in the Cenomanian of North Africa, casting doubt on the accuracy of some recent skeletal reconstructions which may be based on elements from several distinct species. Morphofunctional analysis of the mandibular articulation of the quadrate has shown that the jaw mechanics was peculiar in Spinosauridae. In mature spinosaurids, the posterior parts of the two mandibular rami displaced laterally when the jaw was depressed due to a lateromedially oriented intercondylar sulcus of the quadrate. Such lateral movement of the mandibular ramus was possible due to a movable mandibular symphysis in spinosaurids, allowing the pharynx to be widened. Similar jaw mechanics also occur in some pterosaurs and living pelecanids which are both adapted to capture and swallow large prey items. Spinosauridae, which were engaged, at least partially, in a piscivorous lifestyle, were able to consume large fish and may have occasionally fed on other prey such as pterosaurs and juvenile dinosaurs.

Six quadrate bones, of which two almost certainly come from the Kem Kem beds (Cenomanian, Upper Cretaceous) of south-eastern Morocco, are determined to be from juvenile and adult individuals of Spinosaurinae based on phylogenetic, geometric morphometric, and phylogenetic morphometric analyses. Their morphology indicates two morphotypes evidencing the presence of two spinosaurine taxa ascribed to Spinosaurus aegyptiacus and? Sigilmassasaurus brevicollis in the Cenomanian of North Africa, casting doubt on the accuracy of some recent skeletal reconstructions which may be based on elements from several distinct species. Morphofunctional analysis of the mandibular articulation of the quadrate has shown that the jaw mechanics was peculiar in Spinosauridae. In mature spinosaurids, the posterior parts of the two mandibular rami displaced laterally when the jaw was depressed due to a lateromedially oriented intercondylar sulcus of the quadrate. Such lateral movement of the mandibular ramus was possible due to a movable mandibular symphysis in spinosaurids, allowing the pharynx to be widened. Similar jaw mechanics also occur in some pterosaurs and living pelecanids which are both adapted to capture and swallow large prey items. Spinosauridae, which were engaged, at least partially, in a piscivorous lifestyle, were able to consume large fish and may have occasionally fed on other prey such as pterosaurs and juvenile dinosaurs.

The Ørsted Dal Member of the Upper Triassic Fleming Fjord Formation in East Greenland is well known for its rich vertebrate fauna, represented by numerous specimens of both body and ichnofossils. In particular, the footprints of theropod dinosaurs have been described. Recently, an international expedition discovered several slabs with 100 small chirotheriid pes and manus imprints (pes length 4–4.5 cm) in siliciclastic deposits of this unit. They show strong similarities with Brachychirotherium, a characteristic Upper Triassic ichnogenus with a global distribution. A peculiar feature in the Fleming Fjord specimens is the lack of a fifth digit, even in more deeply impressed imprints. Therefore, the specimens are assigned here tentatively to cf. Brachychirotherium. Possibly, this characteristic is related to the extremely small size and early ontogenetic stage of the trackmaker. The record from Greenland is the first evidence of this morphotype from the Fleming Fjord Formation. Candidate trackmakers are crocodylian stem group archosaurs; however, a distinct correlation with known osteological taxa from this unit is not currently possible. While the occurrence of sauropodomorph plateosaurs in the bone record links the Greenland assemblage more closer to that from the Germanic Basin of central Europe, here the described footprints suggest a Pangaea-wide exchange.Supplementary material: Three-dimensional model of cf. Brachychirotherium pes–manus set (from MGUH 31233b) from the Upper Triassic Fleming Fjord Formation (Norian–Rhaetian) of East Greenland as pdf, ply and jpg files (3D model created by Oliver Wings; photographs taken by Jesper Milàn) is available at https://doi.org/10.6084/m9.figshare.c.2133546

We study the exchange rate behavior, mainly as to the presence of asymmetry in the shocks to conditional variance. Particularly, we investigate if the presence of that asymmetric response is specific to a marked behavior of the currency, appreciation/Dutch disease/depreciation, and if it appears masked when taking long non-homogeneous periods. Taking Mozambique Metical bilateral exchange rate against South Africa Rand, a major trading partner, we identify specific movements in defined sub-periods, where the most recent has the Dutch disease under scrutiny. Our results point out that asymmetry emerges especially when the currency is depreciating, while it is masked when considering larger periods that combine differences in currency behavior.

Many errors in spreadsheet formulas can be avoided if spreadsheets are built automatically from higher-level models that can encode and enforce consistency constraints in the generated spreadsheets. Employing this strategy for legacy spreadsheets is difficult, because the model has to be reverse engineered from an existing spreadsheet and existing data must be transferred into the new model-generated spreadsheet. We have developed and implemented a technique that automatically infers relational schemas from spreadsheets. This technique uses particularities from the spreadsheet realm to create better schemas. We have evaluated this technique in two ways: First, we have demonstrated its applicability by using it on a set of real-world spreadsheets. Second, we have run an empirical study with users. The study has shown that the results produced by our technique are comparable to the ones developed by experts starting from the same (legacy) spreadsheet data. Although relational schemas are very useful to model data, they do not fit well spreadsheets as they do not allow to express layout. Thus, we have also introduced a mapping between relational schemas and ClassSheets. A ClassSheet controls further changes to the spreadsheet and safeguards it against a large class of formula errors. The developed tool is a contribution to spreadsheet (reverse) engineering, because it fills an important gap and allows a promising design method (ClassSheets) to be applied to a huge collection of legacy spreadsheets with minimal effort.

In Europe, the technology development of high-speed trains is increasingly exposed to societal needs, driven by ICT advancements, external to traditional design. Together with the liberalisation of the rail markets and increase pressures from other transport modes leads to an unprecedented situation where planers, operators and suppliers of high-speed have to take decision in this complex and competitive environment.
In such broadening of elements influencing design and, thus, product development process, from the survey here to be presented, it was not observed technology options assessment or strategic agenda setting from visions shifting in the same way.
For the high-speed train industry this new trend requires going beyond the visions of the past 15 to 20 years’ practices of “sector endogenous” and structurally closed strategic methods approaches to a broader interaction with the widening of societal actors now capable of being active contributors to innovation from digitalization.
This way to understand the European industry readiness for undertaking such supra systemic challenge, this paper presents the results from a survey conducted by the authors to 74 representatives of the high-speed train innovation chain regarding to which extent societal embedding is considered in the drafting of their visions and technology development projects.
This work becomes even more pertinent if considered that the debate is now open in the railway industry (not exclusive to high-speed trains) as they are launching the joint initiative SHIFT2RAIL, revise ERRAC (the European Rail Research Advisory Council) mandate and enter in a new research cycle with the European research framework Horizon 2020.

© 2016, Springer-Verlag Berlin Heidelberg.The glaze and in-glaze pigments of the historical nineteenth-century glazed tiles from the Pena National Palace (Sintra, Portugal) were characterized using a multi-analytical approach. Chemical composition and microstructural characterization were ascertained by µ-PIXE, µ-Raman, optical microscopy and VP-SEM–EDS. The manufacturing technique and colour palette in these tiles were found to be close to the ceramic pigments used in traditional majolica. The blue and purple colours derive from cobalt oxide and manganese oxide, respectively. A mixture of Pb–Sn–Sb yellow with cobalt oxide and iron oxide was used for green and dark yellow, respectively, while grey tonalities consist of a complex mixture of cobalt oxide, manganese oxide and Pb–Sn–Sb yellow in different proportions. Results obtained allowed the determination of the oxides and elements used in pigments as well as production techniques, resorting to traditional majolica manufacture, although the tiles were produced by the end of the nineteenth century.

n/a

Punching-shear capacity of slab-column connections in existing R/C structures may be inadequate to bear design loads, so strengthening works are required. The lack of punching resistance may be due to detailing, design or building errors; in other cases, such lack is due to a change of use, which requires an increase of resistance. Different techniques have been developed for strengthening R/C slabs against punching: enlargement of the support, gluing external fibre reinforced polymers or casting a bonded concrete overlay (BCO) on the slab's top surface, insertion of post-installed steel bolts, application of fibre reinforced polymers cords as shear reinforcement. In the paper, the authors apply the Critical Shear Crack Theory (CSCT) to all of these techniques and evaluate their efficacy with reference to a case study.

The work reported here addresses load matching improvement in Net Zero Energy Buildings (Net-ZEBs). The related relevant literature shows that currently research work is mainly focused on improving the load matching of individual buildings. In this paper the concept of a Cooperative Net Zero Energy Community (CNet-ZEC) is introduced, extending discussion to the enhancement of load matching at a wider community level. Both building and community levels are compared in order to assess the work proposed here, through the analysis of three distinct scenarios where five Net-ZEBs work individually or in community.

The results presented here were obtained through a detailed simulation based on 1-min resolution stochastic load profiles and recorded weather data. The results indicate that over the period of a year the CNet-ZEC has the potential to increase the electrical demand covered by onsite electricity generation up to 21% and the on-site generation that is used by the building up to 15%. The following elements are considered by the CNet-ZEC in order to produce those results: (i) demand heterogeneity of the buildings integrating the community; (ii) the higher number of controllable devices; and (iii) the potential higher amount of energy available to satisfy the community demand.

A large collection of vertebrate coprolites from black lacustrine shales in the Late Triassic (Rhaetian–Sinemurian) Kap Stewart Formation, East Greenland is examined with regard to internal and external morphology, prey inclusions, and possible relationships to the contemporary vertebrate fauna. A number of the coprolites were mineralogically examined by X-ray diffraction (XRD), showing the primary mineral composition to be apatite, clay minerals, carbonates and, occasionally, quartz in the form of secondary mineral grains. The coprolite assemblage shows multiple sizes and morphotypes of coprolites, and different types of prey inclusions, demonstrating that the coprolite assemblage originates from a variety of different producers.Supplementary material: A description of the size, shape, structure, texture, contents and preservation of the 328 specimens is available at https://doi.org/10.6084/m9.figshare.c.2134335

http://docentes.fct.unl.pt/lblm/files/methodsmolbiol-2016-1424-81.pdf

The purpose of this application, under Articles 78.1 and 81.1 of the Code, is to replace Diplodocus longus Marsh, 1878 as the type species of the sauropod dinosaur genus Diplodocus by the much better represented D. carnegii Hatcher, 1901, due to the undiagnosable state of the holotype of D. longus (YPM 1920, a partial tail and a chevron). The holotype of D. carnegii, CM 84, is a well-preserved and mostly articulated specimen. Casts of it are on display in various museums around the world, and the species has generally been used as the main reference for studies of comparative anatomy or phylogeny of the genus. Both species are known from the Upper Jurassic Morrison Formation of the western United States. The genus Diplodocus is the basis for the family-level taxa diplodocinae Marsh, 1884, diplodocidae Marsh, 1884, diplodocimorpha Marsh, 1884 (Calvo & Salgado, 1995) and diplodocoidea Marsh, 1884 (Upchurch, 1995). It is also a specifier of at least 10 phylogenetic clades. With the replacement of D. longus by D. carnegii as type species, Diplodocus could be preserved as a taxonomic name with generally accepted content. Taxonomic stability of the entire clade diplodocoidea, and the proposed definitions of several clades within Sauropoda, could be maintained.

n/a

Software refactoring is a well-known technique that provides transformations on software artifacts with the aim of improving their overall quality.

In the past, we have proposed a catalog of refactoring for spreadsheet models expressed in the ClassSheets modeling language, which allows us to specify the business logic of a spreadsheet in an object-oriented fashion.

Reasoning about spreadsheets at the model level enhances a model-driven spreadsheet environment where a ClassSheet model and its conforming instance (the spreadsheet data) automatically co-evolves after a refactoring is applied at the model level. Our motivation for such research was to improve the model and its conforming instance: the spreadsheet data.

In this paper we define such refactorings using previously proposed evolution steps for models and instances.

We also present an empirical study we designed and conducted in order to confirm our original intuition that these refactorings have a positive impact on end-user productivity, both in terms of effectiveness and efficiency.

The results are presented not only in terms of productivity changes between refactored and non-refactored scenarios, but also in terms of overall user satisfaction, relevance, and experience.

In almost all cases the refactorings indeed improved end-users productivity. Moreover, in most cases users were more engaged with the refactored version of the spreadsheets they worked with.

n/a

© 2016 Elsevier B.V. All rights reserved.Different glasses based on the ZnO-B2O3-SiO2 system, with a ZnO content ≥ 60 mol{%} and a fixed SiO2 content (20 mol{%}), were synthesised using a melt-quenching method. Glass samples with zinc oxide concentrations as high as 65 mol{%} were prepared successfully without deteriorating the glass-forming ability. The glass samples were submitted to controlled heat-treatments, and the effect of the ZnO/B2O3 molar ratio on the formation of crystalline phases within the glass matrix was investigated by means of differential thermal analysis (DTA), X-ray diffraction (XRD) and scanning electron microscopy (SEM). DTA results indicated that the glass transition and the onset crystallization temperatures of the studied glasses tended to increase with the increment on the ZnO/B2O3 ratio. XRD data showed that the zinc binary crystalline phases, willemite (Zn2SiO4), a zinc orthosilicate, and zinc borate (Zn3B2O6) could be present in the crystallized glasses, depending on the heat-treatment conditions. The formation of willemite was promoted by an increasing ZnO/B2O3 ratio. Microstructural observations performed by SEM indicated that under controlled experimental parameters (glass composition, heat-treatment temperature and time) the precipitation of nanocrystals within the glass matrix can be achieved, resulting in transparent and translucent willemite glass-ceramics.