n/a

n/a

n/a

n/a

As organizações são concebidas com o enfoque principal na eficiência. As práticas de gestão que adoptam pressupõem, regra geral, a estabilidade do ambiente onde estão inseridas. Por isso, as organizações ficam vulneráveis aos distúrbios a que são sujeitas, e cuja frequência é cada vez maior, o que condiciona a sua eficiência, o seu nível de produtividade e, consequentemente, a sua competitividade. Porque existe uma relação de interdependência mais ou menos definida entre as organizações, a ocorrência de um distúrbio numa delas pode afectar todas as que dela dependem. É, por isso, fundamental que as organizações sejam mais resilientes, isto é, sejam capazes de reagir a um distúrbio inesperado, regressando rapidamente ao estado original ou a um melhor, após a cessação do distúrbio. Neste sentido, uma das acções que pode ser tomada é a definição de planos de mitigação e/ou de contingência. A adequação de planos, de mitigação e/ou de contingência, a implementar quando uma organização está perante um distúrbio, sendo por natureza uma actividade pró-activa, pressupõe a identificação dos distúrbios a que a organização pode ficar sujeita. Atendendo a que os distúrbios podem ter características muito diferentes, no que concerne à frequência de ocorrência, efeito crítico, nível de previsibilidade, área afectada na organização e duração, e podem, ainda, ter origem em fontes diversas, internas ou externas à organização produzidas pelo Homem ou pela Natureza, é fundamental que existam modelos que permitam a sua caracterização e a quantificação do grau de severidade das suas consequências para a organização onde incidem. É possível identificar na bibliografia modelos cujo desenvolvimento está associado aos distúrbios. Contudo, o âmbito em que são desenvolvidos é muito diverso. Nenhum deles, porém, permite caracterizar os distúrbios. O principal objectivo deste artigo é apresentar um modelo conceptual que permita caracterizar os distúrbios e avaliar a severidade dos seus efeitos para a organização onde incidem.

The densification during sintering of borosilicate glass matrix composites with 25 vol. % alumina (Al2O3) particles was investigated. The powder compacts, isostatically pressed at 200 MPa, were sintered at a temperature within the range 800-1000° C and maintained at this temperature during various times. The sintering behaviour of the composites was investigated by density measurement and by axial and radial shrinkage measurements. The crystalline phases present in the sintered composites were identified by XRD and the microstructure was analyzed by SEM. For temperatures up to 900°C, the relative density of the composites increased continuously with sintering temperature and sintering time, while for higher temperatures, the density increased rapidly and then slowed down to achieve a nearly constant value after sintering the composites for 30 minutes. The composites exhibited isotropic shrinkage behaviour when sintered at 800°C and 850°C, but at higher temperatures slightly higher axial shrinkage than radial shrinkage was observed. The shrinkage behaviour and microstructural characteristics of the composites indicate that densification during sintering can be attributed to the viscous flow of the borosilicate glass.

n/a

n/a

We report the architecture and the performances of a memory based on a single field-effect transistor built on paper able to write-erase and read. The device is composed of natural multilayer cellulose fibers that simultaneously act as structural support and gate dielectric; active and passive multicomponent amorphous oxides that work as the channel and gate electrode layers, respectively, complemented by the use of patterned metal layers as source/drain electrodes. The devices exhibit a large counterclockwise hysteresis associated with the memory effect, with a turn-on voltage shift between 1 and -14.5 V, on/off ratio and saturation mobilities of about 104 and 40 cm 2 V-1 s-1, respectively, and estimated charge retention times above 14 000 h. © 2008 American Institute of Physics.

We study the contribution of the most important processes leading to the creation of excited states of Cl14+ ions from the ground configurations of Cl ions in an Electron Cyclotron Resonance Ion Source (ECRIS), which lead to the emission of K X-ray lines. Theoretical values for inner-shell excitation, K and KL ionization cross-sections, and energies and transition probabilities for the de-excitation processes are calculated in the framework of the Multi-Configuration Dirac-Fock (MCDF) method. With reasonable assumptions about the electron energy distribution, a theoretical K[alpha] X-ray spectrum is obtained, which reproduces closely a recent experimental result.

We study the contribution of the most important processes leading to the creation of excited states of Cl14+ ions from the ground configurations of Cl ions in an Electron Cyclotron Resonance Ion Source (ECRIS), which lead to the emission of K X-ray lines. Theoretical values for inner-shell excitation, K and KL ionization cross-sections, and energies and transition probabilities for the de-excitation processes are calculated in the framework of the Multi-Configuration Dirac-Fock (MCDF) method. With reasonable assumptions about the electron energy distribution, a theoretical K[alpha] X-ray spectrum is obtained, which reproduces closely a recent experimental result.

Adenylate kinase (AK) mediates the reversible transfer of phosphate groups between the adenylate nucleotides and contributes to the maintenance of their constant cellular level, necessary for energy metabolism and nucleic acid synthesis. The AK were purified from crude extracts of two sulfate-reducing bacteria (SRB), Desulfovibrio (D.) gigas NCIB 9332 and Desulfovibrio desulfuricans ATCC 27774, and biochemically and spectroscopically characterised in the native and fully cobalt- or zinc-substituted forms. These are the first reported adenylate kinases that bind either zinc or cobalt and are related to the subgroup of metal-containing AK found, in most cases, in Gram-positive bacteria. The electronic absorption spectrum is consistent with tetrahedral coordinated cobalt, predominantly via sulfur ligands, and is supported by EPR. The involvement of three cysteines in cobalt or zinc coordination was confirmed by chemical methods. Extended X-ray absorption fine structure (EXAFS) indicate that cobalt or zinc are bound by three cysteine residues and one histidine in the metal-binding site of the "LID" domain. The sequence (129)Cys-X-5-His-X-15-Cys-X-2-Cys of the AK from D. gigas is involved in metal coordination and represents a new type of binding motif that differs from other known zinc-binding sites of AK. Cobalt and zinc play a structural role in stabilizing the LID domain. (C) 2008 Elsevier Inc. All rights reserved.

The decolorization of aqueous solutions methylene blue (C.I. Basic Blue 9), due to the presence of nanocrystalline Bi2S3, supported on SiO2 submicron particles, was investigated here. For this decolorization process, two distinct characteristics, though related, associated to the role of SiO2/Bi2S3 were identified: (i) high methylene blue adsorption capability and (ii) photocatalytic activity to methylene blue photodecolorization. Effects of experimental parameters on the decolorization process, such as methylene blue and nanocomposite concentrations, pH and Bi2S3 particle size were investigated. The maximum adsorption ability of the SiO2/Bi2S3 was approximately 15.6 mg methylene blue per gram. The complete decolorization of a 16 ppm organic dye solution can be achieved, by an adsorption process, in an extremely short time (less than 5 min), using 1.6 g/L of SiO2/Bi2S3 nanocomposite. The study of the decolorization of the dye by an adsorption-photoassisted decolorization process was carried out by irradiation of a suspension prepared with 100 mL of methylene blue solution (8 ppm) and 50 mg of SiO2/Bi2S3. In these conditions the complete decolorization of the dye, adsorbed and in the solution, was achieved in 40 min. © 2008 Elsevier B.V. All rights reserved.

n/a

n/a

n/a

A semiclassical method is developed to calculate the energy absorption of an electronic system located in the near field of a metal nanoparticle sustaining surface plasmons. The results are found to be similar to those of photon absorption from ordinary transversal radiation. However, they are affected by a geometrical factor that can increase the absorption by several orders of magnitude. As example, we investigate ellipsoidal-shaped metal nanoparticles which, under favorable conditions, may provide near field aborption enhancements almost as large as 10(4), and in many cases above 10. (C) 2008 American Institute of Physics. [DOI: 10.1063/1.3014035]

n/a

n/a

n/a

In this study, changes in the TiO2 (110) work function where followed during Ag deposition in the sub- monolayer regime. Changes in the surface are readily detected as changes in the work function. Significant differences where found in measurements at room temperature and at liquid nitrogen temperature, which can be attributed to differences in the growth mode at those temperatures. The observed work function lowering is evidence of dipole formation by Ag clusters on the TiO2 surface. Since the size and shape of these clusters depend on the surface temperature the differences on the work function variation should be related with the polarization induced by the shape of such clusters.

n/a

n/a

n/a

n/a