Pedro Pereira

This paper describes the development of an open source system for monitoring and data acquisition of several energy analyzers. The developed system is based on a computer with Internet/Intranet connection by means of RS485 using Modbus RTU as communication protocol. The monitoring/metering system was developed for large building complexes and was validated in the Faculdade de Ciências e Tecnologia University campus. The system considers two distinct applications. The first one allows the user to verify, in real time, the energy consumption of any department in the complex, produce load diagrams, tables and print, email or save all available data. The second application keeps records of active/reactive energy consumption in order to verify the existence of some anomalous situation, and also monthly charge energy consumption to each corresponding department.

This work introduces a tool for the optimization of CMOS integrated spiral inductors. The main objective of this tool is to offer designers a first approach for the determination of the inductor layout parameters. The core of the tool is a Genetic Algorithm (GA) optimization procedure where technology constraints on the inductor layout parameters are considered. Further constraints regarding inductor design heuristics are also accounted for. Since the layout parameters are inherently discrete due to technology and topology constraints, discrete variable optimization techniques are used. The Matlab GA toolbox is used and the modifications on the GA functions, yielding technology feasible solutions is presented. For the sake of efficiency and simplicity the pi-model is used for characterizing the inductor. The validity of the design results obtained with the tool, is checked against circuit simulation with ASITIC.

In this paper, an innovative approach for monitoring home electric power quality indicators is presented. Using an electric power analysis device (for this work purpose it will be a smart-meter) and a personal computer it is proved that it is possible to monitor and register electric power quality anomalies, such as long interruptions, voltage dips/swells and frequency oscillations. Through an application developed in Java, a user can view real-time electric parameters, check for electric power quality anomalies and assess load diagram of previous days. Experimental results regarding the application performance are also presented with the respective conclusions.

The complex data exchange between architectural design and building energy simulation constitutes the main challenge in the use of energy performance analyses in the early design stage. The enhancement of BIM model data with additional specific energy-related information and the subsequent mapping to the input of an energy analysis or simulation tool is yet an open issue. This paper examines three approaches for the data transfer from 3D CAD applications to building performance simulations using BIM as central data repository and points out their current and envisaged use in practice. The first approach addresses design scenarios. It focuses on the supporting tools needed to achieve interoperability given a 74 wide-spread commercial BIM model (Autodesk Revit) and a dedicated pre-processing tool (DesignBuilder) for EnergyPlus. The second approach is similar but addresses retrofitting scenarios. In both workflows gbXML is used as the transformation format. In the third approach a standard BIM model, IFC is used as basis for the transfer process for any relevant lifecycle phase.

Power electronics (PE) plays a major role in electrical devices and systems, namely in electromechanical drives, in motor and generator controllers, and in power grids, including high-voltage DC (HVDC) power transmission. PE is also used in devices for the protection against grid disturbances, like voltage sags or power breakdowns. To cope with these disturbances, back-up energy storage devices are used, like uninterruptible power supplies (UPS) and flywheels. Some of these devices may use superconductivity. Commercial PE semiconductor devices (power diodes, power MOSFETs, IGBTs, power Darlington transistors and others) are rarely (or never) experimented for cryogenic temperatures, even when designed for military applications. This means that its integration with HTS power devices is usually done in the hot environment, raising several implementation restrictions. These reasons led to the natural desire of characterising PE under extreme conditions, e. g. at liquid nitrogen temperatures, for use in HTS devices. Some researchers expect that cryogenic temperatures may increase power electronics' performance when compared with room-temperature operation, namely reducing conduction losses and switching time. Also the overall system efficiency may increase due to improved properties of semiconductor materials at low temperatures, reduced losses, and removal of dissipation elements. In this work, steady state operation of commercial PE semiconductors and devices were investigated at liquid nitrogen and room temperatures. Performances in cryogenic and room temperatures are compared. Results help to decide which environment is to be used for different power HTS applications.

High temperature superconducting (HTS) machines are recognized to offer several advantageous features when comparing to conventional ones. Amongst these, highlights the decrease in weight and volume of the machines, due to increased current density in conductors or the absence of iron slots' teeth; or the decrease in AC losses and consequent higher efficiency of the machines, even accounting for cryogenics. These concepts have been already demonstrated and some machines have even achieved commercial stage. In this paper, several alternative approaches are applied to electrical motors employing HTS materials. The first one is an all superconducting linear motor, where copper conductors and permanent magnets are replaced by Bi-2223 windings and trapped flux magnets, taking advantage of stable levitation due to flux pinning, higher current densities and higher excitation field. The second is an induction disk motor with Bi-2223 armature, where iron, ironless and hybrid approaches are compared. Finally, an innovative command strategy, consisting of an electronically variable pole pairs' number approach, is applied to a superconducting hysteresis disk motor. All these concepts are being investigated and simulation and experimental results are presented.

This paper presents the design of a test rig for an all HTS linear synchronous motor. Although this motor showed to have several unattractive characteristics, its design raised a number of problems which must be considered in future HTS machines design. HTS electromagnetic properties led to the development of new paradigms in electrical machines and power systems, as e. g. in some cases iron removal and consequent assembly of lighter devices. This is due to superconductor's ability to carry high currents with minimum losses and consequent generation in the surrounding air of flux densities much higher than the allowed by ferromagnetic saturation. However, severe restrictions in HTS power devices design that goes further beyond cryogenic considerations must be accounted in. This is usually the case when BSCCO tapes are used as conductors. Its bending limitations and the presence of flux components perpendicular to tape surface, due to the absence of iron, have to be considered for it may turn some possible applications not so attractive or even practically unfeasible. An all HTS linear synchronous motor built by BSCCO tapes as armature conductors and two trapped-flux YBCO bulks in the mover was constructed and thrust force measurements are starting to be performed. Although the device presents severe restrictions due to the exposed and other reasons, it allowed systematising its design. A pulsed-field magnetiser to generate opposite fluxes for both YBCO bulks is also detailed. Thrust force numerical predictions were already derived and presented.