Publications

Export 57 results:
Sort by: Author Title [ Type  (Asc)] Year
Journal Article
Centeno, P., M. F. Alexandre, M. Chapa, J. V. Pinto, J. Deuermeier, T. Mateus, E. Fortunato, R. Martins, H. Águas, and M. J. Mendes, {Self-Cleaned Photonic-Enhanced Solar Cells with Nanostructured Parylene-C}, , vol. 2000264, pp. 1–9, 2020. Abstract

Abstract Photonic front-coatings with self-cleaning properties are presented as means to enhance the efficiency and outdoor performance of thin-film solar cells, via optical enhancement while simultaneously minimizing soiling-related losses. This is achieved by structuring parylene-C transparent encapsulants using a low-cost and highly-scalable colloidal-lithography methodology. As a result, superhydrophobic surfaces with broadband light-trapping properties are developed. The optimized parylene coatings show remarkably high water contact angles of up to 165.6° and extremely low adhesion, allowing effective surface self-cleaning. The controlled nano/micro-structuring of the surface features also generates strong anti-reflection and light scattering effects, corroborated by numeric electromagnetic modeling, which lead to pronounced photocurrent enhancement along the UV?vis?IR range. The impact of these photonic-structured encapsulants is demonstrated on nanocrystalline silicon solar cells, that show short-circuit current density gains of up to 23.6%, relative to planar reference cells. Furthermore, the improvement of the devices' angular response enables an enhancement of up to 35.2% in the average daily power generation.

Firmino, R., E. Carlos, J. V. Pinto, J. Deuermeier, R. Martins, E. Fortunato, P. Barquinha, and R. Branquinho, "{Solution Combustion Synthesis of Hafnium-Doped Indium Oxide Thin Films for Transparent Conductors}", Nanomaterials, vol. 12, no. 13, pp. 2167, jun, 2022. AbstractWebsite

{\textless}p{\textgreater}Indium oxide (In2O3)-based transparent conducting oxides (TCOs) have been widely used and studied for a variety of applications, such as optoelectronic devices. However, some of the more promising dopants (zirconium, hafnium, and tantalum) for this oxide have not received much attention, as studies have mainly focused on tin and zinc, and even fewer have been explored by solution processes. This work focuses on developing solution-combustion-processed hafnium (Hf)-doped In2O3 thin films and evaluating different annealing parameters on TCO's properties using a low environmental impact solvent. Optimized TCOs were achieved for 0.5 M{%} Hf-doped In2O3 when produced at 400 °C, showing high transparency in the visible range of the spectrum, a bulk resistivity of 5.73 × 10−2 $Ømega$.cm, a mobility of 6.65 cm2/V.s, and a carrier concentration of 1.72 × 1019 cm−3. Then, these results were improved by using rapid thermal annealing (RTA) for 10 min at 600 °C, reaching a bulk resistivity of 3.95 × 10 −3 $Ømega$.cm, a mobility of 21 cm2/V.s, and a carrier concentration of 7.98 × 1019 cm−3, in air. The present work brings solution-based TCOs a step closer to low-cost optoelectronic applications.{\textless}/p{\textgreater}

Silva, D., C. S. Monteiro, S. O. Silva, O. Frazão, J. V. Pinto, M. Raposo, P. A. Ribeiro, and S. Sério, "{Sputtering Deposition of TiO2 Thin Film Coatings for Fiber Optic Sensors}", Photonics, vol. 9, no. 5: MDPI AG, pp. 342, may, 2022. Abstract

Thin films of titanium dioxide (TiO2) and titanium (Ti) were deposited onto glass and optical fiber supports through DC magnetron sputtering, and their transmission was characterized with regard to their use in optical fiber-based sensors. Deposition parameters such as oxygen partial pressure, working pressure, and sputtering power were optimized to attain films with a high reflectance. The films deposited on glass supports were characterized by UV-Vis spectroscopy, X-ray diffraction (XRD), and scanning electron microscopy (SEM). Regarding the deposition parameters, all three parameters were tested simultaneously, changing the working pressure, the sputtering power, and the oxygen percentage. It was possible to conclude that a lower working pressure and higher applied power lead to films with a higher reflectance. Through the analysis of the as-sputtered thin films using X-ray diffraction, the deposition of both Ti and TiO2 films was confirmed. To study the applicability of TiO2 and Ti in fiber sensing, several thin films were deposited in single mode fibers (SMFs) using the sputtering conditions that revealed the most promising results in the glass supports. The sputtered TiO2 and Ti thin films were used as mirrors to increase the visibility of a low-finesse Fabry–Perot cavity and the possible sensing applications were studied.

Pardal, T., S. Messias, M. Sousa, A. S. R. Machado, C. M. Rangel, D. Nunes, J. V. Pinto, R. Martins, and M. N. {Da Ponte}, "{Syngas production by electrochemical CO2 reduction in an ionic liquid based-electrolyte}", Journal of CO2 Utilization, vol. 18, 2017. Abstract

© 2017 Elsevier Ltd. Graphical abstract: The electrochemical reduction of carbon dioxide dissolved in a solution of water and ionic liquid as electrolyte, at high-pressure and near room-temperature, is reported. This work describes an electro-deposition strategy for the preparation of copper substrate cathodes, coated with bimetallic zinc-copper films, obtained from deep-eutectic solvents plating baths. The prepared bimetallic cathodes showed electrochemical activity for syngas production in 1-butyl-3-methylimidazolium triflate, with yields of 85N$μ$L (normal microliter)cm−2C−1/170N$μ$Lcm−2h−1, high selectivities, tunable H2/CO ratio and low energetic requirements.

Miguel, C., J. V. Pinto, M. Clarke, and M. J. Melo, "{The alchemy of red mercury sulphide: The production of vermilion for medieval art}", Dyes and Pigments, vol. 102: Elsevier Ltd, pp. 210–217, mar, 2014. AbstractWebsite

abstract Vermilion red, mercury sulphide (a-HgS), was one of the most important reds in art and its use as a pigment dates back to Antiquity. In medieval Europe, it could be mined as cinnabar, or produced as vermilion by heating mercury with sulphur. This work aims to study the production of synthetic vermilion as a medieval pigment and to confirm which was the source (mineral or artificial) of the reds used in Portuguese medieval illuminations. The production of synthetic vermilion was based on the process described in the Judaeo-Portuguese medieval treatise “The book on how to make colours”, using materials and technologies as close as possible to the medieval ones. The reaction mechanism was studied by following the heating process by X-ray diffraction, and it was possible to conclude that the transformation from black cubic b-HgS into red hexagonal a-HgS is a solid-state phase transition, occurring at 235 ?C. This result is contrary to what published in technical art literature, in which this process is described as a sublimation. Moreover, Scanning Electron Microscopy evidenced a sinterization effect on the artificial vermilion, not found in medieval original samples nor in paints prepared with mineral cinnabar from Almadén (Spain). Red mercury sulphide, natural and synthetic,was then prepared as a parchment-glue paint and compared to proteinaceous red paints from 12the13th century minia- tures produced in important medieval monasteries, previously fully characterized by a multi-analytical approach (m-Energy dispersive X-ray fluorescence, m-Fourier Transform Infrared Spectroscopy, Raman microscopy). A comparative Electron probe microanalysis of the red paints point to amineral provenance for medieval vermilion found in Portuguese illuminations

Miguel, C., J. V. Pinto, M. Clarke, and M. J. Melo, "{The alchemy of red mercury sulphide: The production of vermilion for medieval art}", Dyes and Pigments, vol. 102, 2014. Abstract

Vermilion red, mercury sulphide ($\alpha$-HgS), was one of the most important reds in art and its use as a pigment dates back to Antiquity. In medieval Europe, it could be mined as cinnabar, or produced as vermilion by heating mercury with sulphur. This work aims to study the production of synthetic vermilion as a medieval pigment and to confirm which was the source (mineral or artificial) of the reds used in Portuguese medieval illuminations. The production of synthetic vermilion was based on the process described in the Judaeo-Portuguese medieval treatise "The book on how to make colours", using materials and technologies as close as possible to the medieval ones. The reaction mechanism was studied by following the heating process by X-ray diffraction, and it was possible to conclude that the transformation from black cubic $\beta$-HgS into red hexagonal $\alpha$-HgS is a solid-state phase transition, occurring at 235 C. This result is contrary to what published in technical art literature, in which this process is described as a sublimation. Moreover, Scanning Electron Microscopy evidenced a sinterization effect on the artificial vermilion, not found in medieval original samples nor in paints prepared with mineral cinnabar from Almadén (Spain). Red mercury sulphide, natural and synthetic, was then prepared as a parchment-glue paint and compared to proteinaceous red paints from 12th-13th century miniatures produced in important medieval monasteries, previously fully characterized by a multi-analytical approach ($μ$-Energy dispersive X-ray fluorescence, $μ$-Fourier Transform Infrared Spectroscopy, Raman microscopy). A comparative Electron probe microanalysis of the red paints point to a mineral provenance for medieval vermilion found in Portuguese illuminations. © 2013 Elsevier Ltd. All rights reserved.

Goswami, S., S. Nandy, A. N. Banerjee, A. Kiazadeh, G. R. Dillip, J. V. Pinto, S. W. Joo, R. Martins, and E. Fortunato, "{“Electro-Typing” on a Carbon-Nanoparticles-Filled Polymeric Film using Conducting Atomic Force Microscopy}", Advanced Materials, vol. 29, no. 47, 2017. Abstract

© 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim. Next-generation electrical nanoimprinting of a polymeric data sheet based on charge trapping phenomena is reported here. Carbon nanoparticles (CNPs) (waste carbon product) are deployed into a polymeric matrix (polyaniline) (PANI) as a charge trapping layer. The data are recorded on the CNPs-filled polyaniline device layer by “electro-typing” under a voltage pulse (VET, from ±1 to ±7 V), which is applied to the device layer through a localized charge-injection method. The core idea of this device is to make an electrical image through the charge trapping mechanism, which can be “read” further by the subsequent electrical mapping. The density of stored charges at the carbon–polyaniline layer, near the metal/polymer interface, is found to depend on the voltage amplitude, i.e., the number of injected charge carriers. The relaxation of the stored charges is studied by different probe voltages and for different devices, depending on the percolation of the CNPs into the PANI. The polymeric data sheet retains the recorded data for more than 6 h, which can be refreshed or erased at will. Also, a write–read–erase–read cycle is performed for the smallest “bit” of stored information through a single contact between the probe and the device layer.