Ana Rita C. Duarte

Over the past several years, the definition of a scaffold for tissue engineering has changed dramatically, from a material that acts only as an inert structural support for cell attachment to serving as a more complex and dynamic environment for tissue development. This paper is a review on the existing and on the new emerging techniques based on supercritical fluid technology for the preparation of scaffolds and particles for tissue engineering applications. Supercritical fluid technology has already proven to be feasible for many pharmaceutical applications and is now emerging as an alternative to conventional materials' processing methods for the preparation of three-dimensional structures and injectable particles suitable to be used in regenerative medicine. The basic principles underlying each technique are here presented as well as the advantages and disadvantages of each process. The state of the art is reviewed and the major conclusions of the studies reported in the literature are discussed.

In this experimental phase equilibrium study, we show for the first time that it is possible to stabilize structure sH of hydrogen clathrate hydrate with the help of some selected promoters. It was established that the formation pressures of these systems are significantly higher than that of structure sII of hydrogen clathrate hydrate when tetrahydrofuran (THF) is used as a promoter. Although no experimental evidence is available yet, it is estimated that the hydrogen storage capacity of structure sH can be as high as 1.4 wt {%} of H 2 , which is about 40{%} higher compared to the hydrogen storage capacity in structure sH. © 2008 American Chemical Society.

The possibility of preparation of ophthalmic drug delivery systems using compressed anti-solvent technology was evaluated. Eudragit RS 100 and RL 100 were used as drug carriers, acetazolamide was the model drug processed. Compressed anti-solvent experiments were carried out as a semi-continuous or a batch operation from a liquid solution of polymer(s) + solute dissolved in acetone. Both techniques allowed the recovery of composite particles, but the semi-continuous operation yielded smaller and less aggregated populations than the batch operation. The release behaviour of acetazolamide from the prepared microparticles was studied and most products exhibited a slower release than the single drug. Moreover, the release could be controlled to some extent by varying the ratio of the two Eudragit used in the formulation and by selecting one or the other anti-solvent technique. Simple diffusion models satisfactorily described the release profiles. Composites specifically produced by semi-continuous technique have a drug release rate controlled by a diffusion mechanism, whereas for composites produced by the batch operation, the polymer swelling also contributes to the overall transport mechanism. © 2006 Elsevier B.V. All rights reserved.

The possibility of preparation of ophthalmic drug delivery systems using compressed anti-solvent technology was evaluated. Eudragit RS 100 and RL 100 were used as drug carriers, acetazolamide was the model drug processed. Compressed anti-solvent experiments were carried out as a semi-continuous or a batch operation from a liquid solution of polymer(s) + solute dissolved in acetone. Both techniques allowed the recovery of composite particles, but the semi-continuous operation yielded smaller and less aggregated populations than the batch operation. The release behaviour of acetazolamide from the prepared microparticles was studied and most products exhibited a slower release than the single drug. Moreover, the release could be controlled to some extent by varying the ratio of the two Eudragit used in the formulation and by selecting one or the other anti-solvent technique. Simple diffusion models satisfactorily described the release profiles. Composites specifically produced by semi-continuous technique have a drug release rate controlled by a diffusion mechanism, whereas for composites produced by the batch operation, the polymer swelling also contributes to the overall transport mechanism. © 2006 Elsevier B.V. All rights reserved.

Carbon dioxide solubility in a natural biodegradable polymer, namely poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and the diffusion coefficients are reported. Equilibrium solubility of dense carbon dioxide in PHBV was studied by a gravimetric method in a temperature range from 308 to 313 K and a pressure range from 10.0 to 15.0 MPa. The copolymer presented Fickian behavior and Fick's diffusion model was applied to determine the amount of carbon dioxide present in the samples after a predermined exposure time as well as the diffusion coefficients. Diffusion coefficients for the sorption under supercritical (sc) conditions and desorption at ambient conditions were determined and compared. To evaluate the influence of the HV content in the amount of maximum sorption degree of the polymer, different samples of PHBV copolymers were tested and the sorption curves are here presented. © 2006 Elsevier B.V. All rights reserved.

The micronization of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) from organic solutions using supercritical antisolvent (SAS) technique has been successfully achieved. SAS experiments were carried out at different operational conditions and microspheres with mean diameters ranging from 3 to 9 $μ$m were obtained. The effect of CO2 and liquid flow, temperature and pressure on particle size and particle size distribution was evaluated. The microspheres were precipitated from a dichloromethane (DCM) solution. The best process conditions for this mixture were, according to our study, 40 °C, 100 bar, 1 mL min-1 liquid flow and 10 L min-1 carbon dioxide flow. Experiments with polymers containing different HV percentages were carried out. The powders obtained became more spherical as the HV content decreased. © 2006 Elsevier B.V. All rights reserved.

Supercritical fluid impregnation was tested to prepare a new ophthalmic drug delivery device. Poly(methylmethacrylate-co-ethylhexylacrylate-co-ethyleneglycoldimethacr ylate), P(MMA-EHA-EGDMA) has been proposed by Mariz [M. Mariz, Preparação de uma lente intra-ocular dotada de um sistema de libertação controlada de fármaco, Master Thesis, Universidade de Coimbra, 1999] as a promising matrix to be used for intraocular delivery of anti-inflammatory drugs used in eye surgery. This matrix was successfully impregnated with flurbiprofen, a non-steroidal anti-inflammatory agent. The success of the impregnation was evaluated by scanning electron microscopy (SEM) analysis and also by in vitro drug release studies. The effect of some operating parameters was evaluated, namely, pressure and contact time. The operating pressure will influence both the solubility of the drug in the supercritical fluid but also the sorption degree of the polymeric matrix in the presence of carbon dioxide. The solubility of the drug in carbon dioxide and the sorption degree are reported in previous studies. A comparison between the batch and the semi-continuous impregnation process is also presented. The supercritical fluid impregnation proved to be feasible for the preparation of a new ophthalmic drug delivery system. The drug release profiles suggest that the drug can be released up to three months, which is a major advantage for the prevention of the inflammatory response after ophthalmic surgery. © 2007 Elsevier B.V. All rights reserved.

Ethylcellulose/methylcellulose blends were produced using different precipitation techniques and impregnated with naproxen, a non-steroidal anti-inflammatory drug (NSAID). Solvent-evaporation technique was used not only for the preparation of ethylcellulose/methylcellulose microspheres but also to encapsulate naproxen. Supercritical fluid (SCF) impregnation was also performed to prepare naproxen loaded microspheres. The microspheres, impregnated by the SCF technique, were prepared both by solvent-evaporation and by a supercritical antisolvent (SAS) process. In vitro release profiles at pH 7.4 and 1.2, of naproxen-loaded microspheres were evaluated and the results were modelled Fick's law of diffusion and Power law. Miscrospheres prepared by supercritical antisolvent have a higher loading capacity and present a slower release profile. The systems studied present a release mechanism controlled by drug diffusion which complies Fick's law of diffusion. © 2005 Elsevier B.V. All rights reserved.

The supercritical antisolvent (SAS) technique was used to prepare ethyl cellulose/methyl cellulose blends, two biocompatible polymers commonly used as drug carriers in controlled delivery systems. Ethyl cellulose is widely used as a drug carrier. The drug release of the delivery devices can be controlled to some extent by addition of a water-soluble or water swellable polymer, such as methyl cellulose. This leads to the solubility enhancement of poorly water-soluble molecules. SAS experiments were carried out at different operational conditions and microspheres with mean diameters ranging from 5 to 30 $μ$m were obtained. The effect of CO2 and liquid flow, temperature and pressure on particle size and particle size distribution was evaluated. The microspheres were precipitated from a mixture of dichloromethane (DCM) and dimethylsulfoxide (DMSO) (4:1 ratio). The best process conditions for this mixture were according to our study 40°C and 80 bar. © 2006 Elsevier B.V. All rights reserved.

Mass sorption and diffusion coefficients in one acrylate biocompatible copolymer contacted with supercritical (sc) carbon dioxide are reported. Equilibrium solubility of dense carbon dioxide in poly(methylmethacrylate-co-ethylhexylacrylate-co-ethyleneglycoldimethacr ylate) (P(MMA-EHA-EGDMA)) was studied by a gravimetric method in a temperature range from 308 to 323 K and a pressure range from 10.0 to 20.0 MPa. The cross-linked copolymer presented Fickian behavior and Fick's diffusion model was applied to determine the amount of carbon dioxide present and the diffusion coefficients. Diffusion coefficients for the sorption under supercritical conditions and desorption at ambient conditions were determined and compared. Samples of P(MMA-EHA-EGDMA) with different thickness were used for comparison of the maximum sorption degree. Polymerization conditions were also varied in order to evaluate the influence of the molecular weight of the copolymer in the CO2 sorption process. To investigate the possibility of impregnating this acrylate copolymer with an anti-inflammatory drug, a preliminary experiment was performed. © 2005 Elsevier B.V. All rights reserved.

Herein the preparation of molecularly imprinted polymers (MIPs) using supercritical fluid technology is evaluated. Poly(diethylene glycol dimethacrylate), polyDEGDMA, was synthesised in supercritical carbon dioxide (scCO2) using a carboxylic acid end-capped perfluoropolyether oil as stabiliser. Polymerisations were carried out in the presence of different concentrations of two different template drug molecules, salicylic acid and acetylsalicylic acid. Results suggest that molecular imprinted polymers were successfully prepared by supercritical polymerisation and then impregnated with the template in order to prepare controlled release systems. © 2006 Elsevier B.V. All rights reserved.

In situ ATR-IR spectroscopy was used to simultaneously measure the sorption and swelling of carbon dioxide at high pressures in a biocompatible acrylate copolymer poly(methylmethacrylate-co-ethylhexylacrylate-co- ethyleneglycoldimethacrylate), P(MMA-EHA-EGDMA). The $ν$ 3 band of CO 2 dissolved in the polymer (at 2335 cm -1 ) was used to calculate the sorption data and the polymer swelling was determined by analyzing the changes in the absorbance of the $ν$(CO) band (at 1730 cm -1 ) of the polymer. Transmission spectroscopy in the near-IR region was also used to study the sorption of CO 2 in the polymer using combinational and overtone bands. The experiments were carried out in a pressure range of 2.0-12.0 MPa and in a temperature range of 27-40 °C. The data for CO 2 sorption in this polymer obtained by in situ spectroscopic methods have been compared to the data obtained by the gravimetric technique. © 2005 Elsevier B.V. All rights reserved.

Equilibrium solubility of acetazolamide, a carbonic-anhydrase inhibitor, in supercritical carbon dioxide in the presence of a cosolvent was measured by a static analytical method for three mole fractions of ethanol (5, 7.5, and 10) {%} at 313.0 K from (13.0 to 21.0) MPa and at 323.0 K from (13.0 to 21.0) MPa for a mole fraction of 5{%} ethanol The presence of a cosolvent (ethanol) was essential for the solubilization of the bioactive compound in supercritical carbon dioxide. The results obtained are useful for the design of supercritical processes with this drug. Experimental solubility data were correlated with two enhanced density-based models (Chrastil, I. Solubility of Solids in Supercritical Gases. J. Phys. Chem. 1982, 86, 3016-3021; Santiago, J. M.; Teja, A. S. The solubility of solids in supercritical fluids. Fluid Phase Equilib. 1999, 158-160, 501-510).

Equilibrium solubility of flurbiprofen, a nonsteroidal antiinflammatory agent, in supercritical carbon dioxide was measured by a static analytical method in the pressure range from (8.0 to 25.0) MPa, at temperatures of (303.0, 313.0, and 323.0) K. The cosolvent effect of ethanol in the solubility of the bioactive compound in supercritical carbon dioxide was investigated at 18 MPa and 313 K. The results obtained have a potential application in supercritical processes for this drug. Experimental solubility data were correlated with an empirical density-based Chrastil model.

The fluid phase behaviour for the binary systems carbon dioxide+cyclobutanone and propane+cyclobutanone has been determined experimentally, using Cailletet equipment. For both the systems bubble points have been determined for a number of isopleths covering the whole mole fraction range. Additionally, for the binary system carbon dioxide+cyclobutanone dew points and critical points could be observed for a number of overall-compositions rich in carbon dioxide. The temperature and pressure range were, respectively, from 278 to 369K and from 0.1 to 14.0MPa. Correlation of the experimental data of both systems has been performed using the Soave-Redlich-Kwong (SRK) equation of state. Satisfactory results have been achieved using only one binary interaction parameter. © 2003 Elsevier B.V. All rights reserved.