Ana Rita C. Duarte

One of the major scientific challenges that tissue engineering and regenerative medicine (TERM) faces to move from benchtop to bedside regards biomaterials development, despite the latest advances in polymer processing technologies. A variety of scaffolds processing techniques have been developed and include solvent casting and particles leaching, compression molding and particle leaching, thermally induced phase separation, rapid prototyping, among others. Supercritical fluids appear as an interesting alternative to the conventional methods for processing biopolymers as they do not require the use of large amounts of organic solvents and the processes can be conducted at mild temperatures. However, this processing technique has only recently started to receive more attention from researchers. Different processing methods based on the use of supercritical carbon dioxide have been proposed for the creation of novel architectures based on natural and synthetic polymers and these will be unleashed in this paper. © 2013 Elsevier B.V. All rights reserved.

One of the major scientific challenges that tissue engineering and regenerative medicine (TERM) faces to move from benchtop to bedside regards biomaterials development, despite the latest advances in polymer processing technologies. A variety of scaffolds processing techniques have been developed and include solvent casting and particles leaching, compression molding and particle leaching, thermally induced phase separation, rapid prototyping, among others. Supercritical fluids appear as an interesting alternative to the conventional methods for processing biopolymers as they do not require the use of large amounts of organic solvents and the processes can be conducted at mild temperatures. However, this processing technique has only recently started to receive more attention from researchers. Different processing methods based on the use of supercritical carbon dioxide have been proposed for the creation of novel architectures based on natural and synthetic polymers and these will be unleashed in this paper. © 2013 Elsevier B.V. All rights reserved.

Human articular cartilage functions under a wide range of mechanical loads in synovial joints, where hydrostatic pressure (HP) is the prevalent actuating force. We hypothesized that the formation of engineered cartilage can be augmented by applying such physiologic stimuli to chondrogenic cells or stem cells, cultured in hydrogels, using custom-designed HP bioreactors. To test this hypothesis, we investigated the effects of distinct HP regimens on cartilage formation in vitro by either human nasal chondrocytes (HNCs) or human adipose stem cells (hASCs) encapsulated in gellan gum (GG) hydrogels. To this end, we varied the frequency of low HP, by applying pulsatile hydrostatic pressure or a steady hydrostatic pressure load to HNC-GG constructs over a period of 3 weeks, and evaluated their effects on cartilage tissue-engineering outcomes. HNCs (10×10 6 cells/mL) were encapsulated in GG hydrogels (1.5{%}) and cultured in a chondrogenic medium under three regimens for 3 weeks: (1) 0.4 MPa Pulsatile HP; (2) 0.4 MPa Steady HP; and (3) Static. Subsequently, we applied the pulsatile regimen to hASC-GG constructs and varied the amplitude of loading, by generating both low (0.4 MPa) and physiologic (5 MPa) HP levels. hASCs (10×10 6 cells/mL) were encapsulated in GG hydrogels (1.5{%}) and cultured in a chondrogenic medium under three regimens for 4 weeks: (1) 0.4 MPa Pulsatile HP; (2) 5 MPa Pulsatile HP; and (3) Static. In the HNC study, the best tissue development was achieved by the pulsatile HP regimen, whereas in the hASC study, greater chondrogenic differentiation and matrix deposition were obtained for physiologic loading, as evidenced by gene expression of aggrecan, collagen type II, and sox-9; metachromatic staining of cartilage extracellular matrix; and immunolocalization of collagens. We thus propose that both HNCs and hASCs detect and respond to physical forces, thus resembling joint loading, by enhancing cartilage tissue development in a frequency- and amplitude-dependant manner. © Copyright 2012, Mary Ann Liebert, Inc.

A new generation of scaffolds capable of acting not only as support for cells but also as a source of biological cues to promote tissue regeneration is currently a hot topic of in bone Tissue Engineering (TE) research. The inclusion of growth factor (GF) controlled release functionalities in the scaffolds is a possible strategy to achieve such goal. Platelet Lysate (PL) is an autologous source of GFs, providing several bioactive agents known to act on bone regeneration. In this study, chitosan-chondroitin sulfate nanoparticles loaded with PL were included in a poly(d,l-lactic acid) foam produced by supercritical fluid foaming. The tridimensional (3D) structures were then seeded with human adipose-derived stem cells (hASCs) and cultured in vitro under osteogenic stimulus. The osteogenic differentiation of the seeded hASCs was observed earlier for the PL-loaded constructs, as shown by the earlier alkaline phosphatase peak and calcium detection and stronger Runx2 expression at day 7 of culture, in comparison with the control scaffolds. Osteocalcin gene expression was upregulated in presence of PL during all culture period, which indicates an enhanced osteogenic induction. These results suggest the synergistic effect of PL and hASCs in combinatory TE strategies and support the potential of PL to increase the multifunctionality of the 3D hybrid construct for bone TE applications. © 2012 Elsevier B.V. All rights reserved.

In this work, the ability to foam semi-crystalline natural-based polymers by supercritical fluid technology is evaluated. The application of this technique to natural polymers has been limited due to the fact that they are normally semi-crystalline polymers, which do not plasticize in the presence of carbon dioxide. This can be overcome by the use of plasticizers, such as glycerol, which is a commonly used plasticizer, or ionic liquids, which have recently been proposed as plasticizing agents for different polymers. Following the green chemistry principles, the main aim is, hereafter, the design and development of new 3D architectures of natural-based polymers, combining ionic liquids (IL) and supercritical fluid (SCF) technology. A polymeric blend of starch, one of the most abundantly occurring natural polymers, and poly-$ε$-caprolactone, a synthetic polymer, which is a biodegradable aliphatic polyester commonly used in an array of biomedical applications (SPCL), was processed by supercritical fluid foaming, at different operating conditions, namely pressure (10.0 up to 20.0 MPa), temperature (35 up to 60 °C) and soaking time (30 min up to 3 h). The ionic liquid tested in this work was 1-butyl-3-methylimidazolium acetate ([bmim]Ac). The interactions between SPCL and [bmim] Ac or glycerol were analysed by Fourier transform infrared spectroscopy, differential scanning calorimetry and by mechanical tests, using both tensile and compressive modes. Morphological analysis, porosity, interconnectivity and pore size distribution of the matrixes were evaluated and the morphology was analyzed by scanning electron microscopy and by micro-computed tomography. To our knowledge the use of ionic liquids as foaming agents is reported here for the first time. The results obtained suggest that this approach can further promote the development of composite polymer-IL materials, particularly for catalysis, chromatography, extraction and separation purposes. © The Royal Society of Chemistry 2012.

A marine derived polysaccharide, ulvan, extracted from green algae, was combined with poly-d, l-lactic acid (PDLLA) in order to produce a novel scaffold for bone tissue engineering applications. Three dimensional (3D) scaffolds of PDLLA loaded with ulvan particles were originally prepared by subcritical fluid sintering with carbon dioxide at 40°C and 50 bar. Prepared matrixes were characterized in order to validate their suitability to be used as scaffolds for bone tissue regeneration. Characterization included micro-computed tomography, mechanical compression testing, water uptake and degradation testing, and cytotoxicity assays. In addition, ulvan particles loaded with dexamethasone, were also dispersed within the PDLLA matrix and the respective release profile from the samples was evaluated. Prepared PDLLA scaffolds enriched with ulvan particles demonstrated appropriate physicochemical and cytocompatible features to be used for the envisaged applications. On the other hand, the release of dexamethasone from ulvan particles embedded within the PDLLA matrix revealed that the designed systems can be potentially suitable for localized drug delivery. These results further contribute to the establishment of ulvan as a potential novel biomaterial. © 2012 Elsevier B.V. All rights reserved.

The aim of this study was to evaluate the possibility of preparing chitosan porous matrixes using supercritical fluid technology. Supercritical immersion precipitation technique was used to prepare scaffolds of a natural biocompatible polymer, chitosan for tissue engineering purposes. The physicochemical and biological properties of chitosan make it an excellent material for the preparation of drug delivery systems and for the development of new biomedical applications in many fields from skin to bone or cartilage. Supercritical assisted phase inversion experiments were carried out and the effect of different organic solvents on the morphology of the scaffolds was assessed. Chitosan scaffold morphology, porosity and pore size were evaluated by SEM and micro-CT. A thermodynamic analysis of the process was carried out and insights on the solubility parameter and Flory-Huggins interaction parameters are given. The preparation of a highly porous and interconnected structure of a natural material, chitosan, using a clean and environmentally friendly technology constitutes a new processing technology for the preparation of scaffolds for tissue engineering using these materials. © 2011 Elsevier B.V.

The application of green chemistry principles in the processing of materials for advanced technologies is a steadily increasing field of research. In this work porous chitin-based materials were developed by combining the processing of chitin using ionic liquids (ILs) as a green solvent together with the use of supercritical fluid technology (SCF) as clean technology. Chitin was dissolved in 1-butyl-3-imidazolium acetate, followed by regeneration of the polymer in ethanol in specific moulds. The IL was removed using Soxhlet extraction and successive steps of extraction with SCF using carbon dioxide/ethanol ratios of 50/50 and 70/30. The developed porous chitin-based structures (ChIL) can be classified as mesoporous materials, with very low density and high porosity. The cytotoxicity of ChIL extracts was investigated using L929 fibroblast-like cells, and the results demonstrated that the produced materials have extremely low cytotoxicity levels. Therefore, the findings suggest that the porous chitin structures may be potential candidates for a number of biomedical applications, including tissue engineering. © 2010 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Phase equilibrium measurements of single and mixed organic clathrate hydrates with hydrogen were determined within a pressure range of 2.0-14.0. MPa. The organic compounds studied were furan, 2,5-dihydrofuran, tetrahydropyran, 1,3-dioxolane and cyclopentane. These organic compounds are known to form structure II clathrate hydrates with water. It was found that the addition of hydrogen to form a mixed clathrate hydrate increases the stability compared to the single organic clathrate hydrates. Moreover, the mixed clathrate hydrate also has a much higher stability compared to a pure hydrogen structure II clathrate hydrate. Therefore, the organic compounds act as promoter materials. The stabilities of the single and mixed organic clathrate hydrates with hydrogen showed the following trend in increasing order: 1,3-dioxolane {\textless} 2,5-dihydrofuran {\textless} tetrahydropyran {\textless} furan {\textless} cyclopentane, indicating that both size and geometry of the organic compound determine the stability of the clathrate hydrates. © 2011 Elsevier B.V.

A completely new strategy for cell culture focusing on the design of three-dimensional (3D) smart surfaces by supercritical fluid technology has been developed. This approach might overcome the limitations on cell expansion and proliferation of currently existing techniques. An alternative technology, based on supercritical carbon dioxide, was used to polymerize poly(N- isopropylacrylamide) (PNIPAAm) and to foam poly(d,l-lactic acid) (P D,L LA), creating a thermosensitive 3D structure which has proven to have potential as a substrate for cell growth and expansion. We demonstrated that the thermosensitive matrices promoted cell detachment, thus P D,L LA scaffolds have the potential to be used as substrates for cell growth and expansion avoiding enzymatic and mechanical methods of cell harvesting. The harvested cells were replated to evaluate their viability, which was not compromised. A major advantage of this technology is the fact that the prepared materials can be recovered and reused. Therefore, the same substrate can be recycled and reused for different batches. An indirect impact of the technology developed is related to the field of biotechnology, as this novel technology for cell expansion can be applied to any adherent cell cultures. © 2010 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

We present some selected results indicating the feasibility of preparing therapeutic finished ophthalmic articles, namely commercially available soft contact lenses, using a supercritical solvent impregnation (SSI) technique. Several commercial soft contact lenses were tested and, among these, four lenses were selected for more complete studies: Nelfilcon A (FocusDailies®, CIBA Vision), Omafilcon A (Proclear® Compatibles, CooperVision), Methafilcon A (Frequency® 55, CooperVision) and Hilafilcon B (SofLens® 59 Comfort, Bausch {&} Lomb). Supercritical carbon dioxide (scCO2) was the chosen supercritical fluid and two ophthalmic drugs were tested: flurbiprofen (a NSAID, hydrophobic) and timolol maleate (an anti-glaucoma drug, hydrophilic). The effects of operational pressure, of impregnation duration and of the addition of a cosolvent (ethanol) were studied on the overall drug loading yields. Depending on the experiment, we employed pressures from 9 up to 16 MPa and impregnation times from 30 up to 180 min. Temperature was kept constant and equal to 313 K. The employed depressurization rates were kept low and between 0.1 and 0.2 MPa/min. Results are discussed in terms of the employed operational conditions and taking in consideration all the possible interactions between supercritical fluids, drugs, cosolvents and the polymers which compose the employed hydrogel contact lenses. In vitro drug release experiments were carried out in order to evaluate the resulting drug release profiles. Obtained results were also compared with drug-loaded contact lenses obtained by conventional drug "soaking" in aqueous solutions. Results also proved that SSI can be considered as a viable, efficient and safe alternative for the impregnation of drugs, including those of hydrophobic character or presenting low aqueous solubility, into commercial soft contact lenses. SSI proved to be a "tunable" process since the variation of the employed operational conditions indicated that it is possible to control the amount of impregnated drug. In the end, the ophthalmic articles were recovered undamaged and without the presence of harmful solvent residues. This method also permits to process already prepared commercial contact lenses, without interfering with their manufacture methods and, after processing, store them for future use. © 2010 Elsevier B.V. All rights reserved.

Starch-based polymers have been proposed for different tissue engineering applications due to their inherent properties. In this work, a polymeric blend of starch-poly-(?-caprolactone) (SPCL) was processed using supercritical fluid technology, namely, by supercritical assisted phase inversion. As SPCL is a biodegradable polymer, the matrices produced are susceptible of undergoing enzymatic degradation upon implantation in the human body. In vitro assessment of the enzymatic degradation of SPCL was carried out in different buffer solutions containing a-amylase and/or lipase. The effect of the presence ofthese enzymes was studied by monitoring different parameters in order to characterise both bulk and the surface of the scaffolds. As regards to bulk analysis, weight loss of the samples incubated for 1, 3, 7, 14 and 21 days was determined, further differential scanning calorimetry was carried out. The morphology of the scaffolds after these periods was analysed by micro-computed tomography (?-CT) and surface chemistry was characterised by infra-red spectroscopy and contact angle measurements. Results suggest that SPLC scaffolds undergo bulk degradation, which is typically characterised by hydrolysis of chemical bonds in the polymer chain at the centre of the matrix, resulting in a highly porous material. ? 2010 Elsevier Ltd. All rights reserved.

In the tissue engineering (TE) field, the concept of producing multifunctional scaffolds, capable not only of acting as templates for cell transplantation but also of delivering bioactive agents in a controlled manner, is an emerging strategy aimed to enhance tissue regeneration. In this work, a complex hybrid release system consisting in a three-dimensional (3D) structure based on poly(d,l-lactic acid) (PDLLA) impregnated with chitosan/chondroitin sulfate nanoparticles (NPs) was developed. The scaffolds were prepared by supercritical fluid foaming at 200 bar and 35 °C, and were then characterized by scanning electron microscopy (SEM) and micro-CT. SEM also allowed to assess the distribution of the NPs within the structure, showing that the particles could be found in different areas of the scaffold, indicating a homogeneous distribution within the 3D structure. Water uptake and weight loss measurements were also carried out and the results obtained demonstrated that weight loss was not significantly enhanced although the entrapment of the NPs in the 3D structure clearly enhances the swelling of the structure. Moreover, the hybrid porous biomaterial displayed adequate mechanical properties for cell adhesion and support. The possibility of using this scaffold as a multifunctional material was further evaluated by the incorporation of a model protein, bovine serum albumin (BSA), either directly into the PDLLA foam or in the NPs that were eventually included in the scaffold. The obtained results show that it is possible to achieve different release kinetics, suggesting that this system is a promising candidate for dual protein delivery system for TE applications. © 2010 Elsevier B.V.

A laboratory-scale reactor system is built and operated to measure the kinetic of formation for single and mixed carbon dioxide-tetrahydrofuran hydrates. The T-cycle method, which is used to collect the kinetic data, is briefly discussed. For single carbon dioxide hydrate, the induction time decreases with the increase of the initial carbon dioxide pressure up to 2.96. MPa. Beyond this pressure, the induction time is becoming relatively constant with the increase of initial carbon dioxide pressure indicating that the liquid phase is completely supersaturated with carbon dioxide. Experimental results show that the inclusion of tetrahydrofuran reduces the induction time required for hydrate formation. These observations indicate hydrate nucleation process and onset growth are more readily to occur in the presence of tetrahydrofuran. In contrast, the presence of sodium chloride prolongs the induction time due to clustering of water molecules with the ions and the salting-out effects. It is also shown that the degree of subcooling required for hydrate formation is affected by the presence of tetrahydrofuran and sodium chloride in the hydrate forming system. The presence of tetrahydrofuran in the hydrate system significantly reduces the amount of carbon dioxide uptake. The apparent rate constant, k, for those systems are reported. © 2010.

This work addresses the preparation of 3D porous scaffolds of blends of chitosan and poly(l-lactic acid), CHT and PLLA, using supercritical fluid technology. Supercritical assisted phase-inversion was used to prepare scaffolds for tissue engineering purposes. The physicochemical and biological properties of chitosan make it an excellent material for the preparation of drug delivery systems and for the development of new biomedical applications in many fields from skin to bone or cartilage regeneration. On the other hand, PLLA is a synthetic biodegradable polymer widely used for biomedical applications. Supercritical assisted phase-inversion experiments were carried out in samples with different polymer ratios and different polymer solution concentrations. The effect of CHT:PLLA ratio and polymer concentration and on the morphology and topography of the scaffolds was assessed by SEM and Micro-CT. Infra-red spectroscopic imaging analysis of the scaffolds allowed a better understanding on the distribution of the two polymers within the matrix. This work demonstrates that supercritical fluid technology constitutes a new processing technology, clean and environmentally friendly for the preparation of scaffolds for tissue engineering using these materials. © 2010 Elsevier B.V.

Electrospun structures were proposed as scaffolds owing to their morphological and structural similarities with the extracellular matrix found in many native tissues. These fibrous structures were also proposed as drug release systems by exploiting the direct dependence of the release rate of a drug on the surface area. An osteogenic differentiation factor, dexamethasone (DEX), was incorporated into electrospun polycaprolactone (PCL) nanofibers at different concentrations (5, 10, 15 and 20 wt.{%} polymer), in a single-step process. The DEX incorporated into the polymeric carrier is in amorphous state, as det ermined by DSC, and does not influence the typical nanofibers morphology. In vitro drug release studies demonstrated that the dexamethasone release was sustained over a period of 15 days. The bioactivity of the released dexamethasone was assessed by cultivating human bone marrow mesenchymal stem cells (hBMSCs) on 15 wt.{%} DEX-loaded PCL NFMs, under dexamethasone-absent osteogenic differentiation medium formulation. An increased concentration of alkaline phosphatase and deposition of a mineralized matrix was observed. Phenotypic and genotypic expression of osteoblastic-specific markers corroborates the osteogenic activity of the loaded growth/differentiation factor. Overall data suggests that the electrospun biodegradable nanofibers can be used as carriers for the sustained release of growth/differentiation factors relevant for bone tissue engineering strategies. © 2010 Elsevier Ltd.

The aim of this study was to evaluate the possibility of preparing chitosan porous matrixes using supercritical fluid technology. Supercritical immersion precipitation technique was used to prepare scaffolds of a natural biocompatible polymer, chitosan, for tissue engineering purposes. The physicochemical and biological properties of chitosan make it an excellent material for the preparation of drug delivery systems and for the development of new biomedical applications in many fields from skin to bone or cartilage. Immersion precipitation experiments were carried out at different operational conditions in order to optimize the processing method. The effect of different organic solvents on the morphology of the scaffolds was assessed. Additionally, different parameters that influence the process were tested and the effect of the processing variables such as polymer concentration, temperature and pressure in the chitosan scaffold morphology, porosity and interconnectivity was evaluated by micro computed tomography. The preparation of a highly porous and interconnected structure of a natural material, chitosan, using a clean and environmentally friendly technology constitutes a new processing technology for the preparation of scaffolds for tissue engineering using these materials. © (2010) Trans Tech Publications.

In this work, a starch-based polymer, namely a blend of starch-poly(epsilon-caprolactone) was processed by supercritical assisted phase inversion process. This processing technique has been proposed for the development of 3D structures with potential applications in tissue engineering applications, as scaffolds. The use of carbon dioxide as non-solvent in the phase inversion process leads to the formation of a porous and interconnected structure, dry and free of any residual solvent. Different processing conditions such as pressure (from 80 up to 150 bar) and temperature (45 and 55 degrees C) were studied and the effect on the morphological features of the scaffolds was evaluated by scanning electron microscopy and micro-computed tomography. The mechanical properties of the SPCL scaffolds prepared were also studied. Additionally, in this work, the in vitro biological performance of the scaffolds was studied. Cell adhesion and morphology, viability and proliferation was assessed and the results suggest that the materials prepared are allow cell attachment and promote cell proliferation having thus potential to be used in some for biomedical applications.

The aim of this study was to evaluate the possibility of preparing dexamethasone-loaded starch-based porous matrices in a one-step process. Supercritical phase inversion technique was used to prepare composite scaffolds of dexamethasone and a polymeric blend of starch and poly(l-lactic acid) (SPLA) for tissue engineering purposes. Dexamethasone is used in osteogenic media to direct the differentiation of stem cells towards the osteogenic lineage. Samples with different drug concentrations (5-15 wt.{%} polymer) were prepared at 200 bar and 55 °C. The presence of dexamethasone did not affect the porosity or interconnectivity of the polymeric matrices. Water uptake and degradation studies were also performed on SPLA scaffolds. We conclude that SPLA matrices prepared by supercritical phase inversion have a swelling degree of nearly 90{%} and the material presents a weight loss of ∼25{%} after 21 days in solution. Furthermore, in vitro drug release studies were carried out and the results show that a sustained release of dexamethasone was achieved over 21 days. The fitting of the power law to the experimental data demonstrated that drug release is governed by an anomalous transport, i.e., both the drug diffusion and the swelling of the matrix influence the release of dexamethasone out of the scaffold. The kinetic constant was also determined. This study reports the feasibility of using supercritical fluid technology to process in one step a porous matrix loaded with a pharmaceutical agent for tissue engineering purposes. © 2009 Acta Materialia Inc.

Supercritical fluid technology has proven to be useful for many pharmaceutical applications and is now emerging as an alternative to conventional processes for the preparation of 3D structures and injectable particles suitable to be used in regenerative medicine. A current overview of the basic principles underlying supercritical fluid technology, the state of the art and future potential of this technology are presented.

Supercritical fluid impregnation was tested to prepare a new scaffold loaded with a bioactive compound. Dexamethasone is used in osteogenic media to direct the differentiation of stem cells towards the osteogenic lineage. Dexamethasone was impregnated in chitosan scaffolds at different operating conditions, in order to optimize the impregnation process. Pressure and temperature affect the carbon dioxide density and influence the swelling of the polymer and the drug solubility in the fluid phase, therefore these are two important parameters that were studied in this work. Chitosan sponges prepared by freeze drying were impregnated with the active compound at pressures from 8.0 up to 14.0 MPa and temperatures from 35 up to 55 °C. The effect of the impregnation contact time (3 h and 6 h) was also evaluated. From the experiments performed we can conclude that the yield of impregnation is lower when increasing pressure and temperature. The contact time will mainly influence the amount of drug impregnated in the scaffold and for higher contact times the impregnation yield is also higher. Scanning electron microscopy shows particles of dexamethasone in the bulk of the scaffold, which confirms the feasibility of the supercritical fluid impregnation technology for the preparation of delivery devices. The loading capacity of the scaffolds was determined by spectroscopic analysis and the highest loading was achieved for the experiments performed at 8.0 MPa and 35 °C. Furthermore, in vitro drug release studies were carried out and the results show that dexamethasone was sustainably released. Supercritical fluid impregnation proved to be feasible for the preparation of a drug delivery system for bone tissue engineering purposes. © 2008 Elsevier Ltd. All rights reserved.

The aim of this study was to evaluate the possibility of preparing starch-based porous matrixes using supercritical fluid technology. Supercritical immersion precipitation technique was used to prepare scaffolds of a polymeric blend of starch and poly(l-lactic acid) for tissue engineering purposes.Immersion precipitation experiments were carried out at different operational conditions and highly porous and interconnected scaffolds were obtained. Two organic solvents, dichloromethane and chloroform were tested, and from the results obtained chloroform was the more favourable for the process. The effect of polymer solution concentration (5 up to 20 wt{%}), temperature (35 up to 55 °C) and pressure (100 up to 200 bar) in the SPLA (50:50 wt{%}) membrane morphology, porosity and interconnectivity was evaluated. All the conditions tested were in the region of total miscibility between the organic solvent and carbon dioxide. Additionally, a blend with a different starch-poly(l-lactic acid) ratio (30:70 wt{%}) was tested. Bicontinuous structures were formed indicating that the L-L demixing process that governs the phase inversion is the spinodal decomposition. © 2008 Elsevier B.V. All rights reserved.

The aim of this study was to develop a new process for the production of bioactive 3D scaffolds using a clean and environmentally friendly technology. The possibility of preparing composite scaffolds of Bioglass?? and a polymeric blend of starch and poly(l-lactic acid) (SPLA50) was evaluated. Supercritical phase-inversion technique was used to prepare inorganic particles loaded starch-based porous composite matrixes in a one-step process for bone tissue engineering purposes. Due to their osteoconductive properties some glasses and ceramics are interesting materials to be used for bone tissue engineering purposes; however their poor mechanical properties create the need of a polymeric support where the inorganic fraction can be dispersed. Samples impregnated with different concentrations of Bioglass?? (10 and 15{%} wt/wt polymer) were prepared at 200??bar and 55????C. The presence of Bioglass?? did not affect the porosity or interconnectivity of the polymeric matrixes. Dynamic mechanical analysis has proven that the modulus of the SPLA50 scaffolds increases when glass particles are impregnated within the matrix. In vitro bioactivity studies were carried out using simulated body fluid and the results show that a calcium-phosphate layer started to be formed after only 1??day of immersion. Chemical analysis of the apatite layer formed on the surface of the scaffold was performed by different techniques, namely EDS and FTIR spectroscopy and X-ray diffraction (XRD). The ion concentration in the simulated body fluid was also carried out by ICP analysis. Results suggest that a bone-like apatite layer was formed. This study reports the feasibility of using supercritical fluid technology to process, in one step, a porous matrix loaded with a bioactive material for tissue engineering purposes. ?? 2009 Elsevier B.V. All rights reserved.