The design and production of structures with nanometer-sized polymer films based on layer-by-layer (LbL) are of particular interest for tissue engineering since they allow the precise control of physical and biochemical cues of implantable devices. In this work, a method is developed for the preparation of nanostructured hollow multilayers tubes combining LbL and template leaching. The aim is to produce hollow tubes based on polyelectrolyte multilayer films with tuned physical-chemical properties and study their effects on cell behavior. The final tubular structures are characterized by differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), microscopy, swelling, and mechanical tests, including dynamic mechanical analysis (DMA) in physiological simulated conditions. It is found that more robust films could be produced upon chemical cross-linking with genipin. In particular, the mechanical properties confirms the viscoelastic properties and a storage and young modulus about two times higher. The water uptake decreases from about 390{%} to 110{%} after the cross-linking. The biological performance is assessed in terms of cell adhesion, viability, and proliferation. The results obtained with the cross-linked tubes demonstrate that these are more suitable structures for cell adhesion and spreading. The results suggest the potential of these structures to boost the development of innovative tubular structures for tissue engineering approaches.

In this work, blends of starch and poly-$ε$-caprolactone (PCL) doped with different concentrations of 1-butyl-3-methylimidazolium acetate ([BMIM]Ac) or 1-butyl-3-methylimidazolium chloride ([BMIM] Cl) were studied. The blends were characterized by mechanical analysis, infra-red spectroscopy (FTIR), differential scanning calorimetry (DSC) and dielectric relaxation spectroscopy (DRS), evaluating the IL doping effect. The samples were subjected to supercritical carbon dioxide foaming and the morphology of the structures was assessed. DSC shows a single glass transition and melting endotherm for foamed and unfoamed samples, having no effect upon IL doping, and DRS shows increased molecular mobility for blends with higher IL concentrations, and some hindrance for lower ones. The conductivity for SPCL doped with 30{%} [BMIM] Cl, before and after foaming, is comparable to the conductivity of the IL but exhibits more stable conductivity values, opening doors for applications as self-supported conductive materials. © 2014 the Partner Organisations.

Marine biomaterials are a new emerging area of research with significant applications. Recently, researchers are dedicating considerable attention to marine-sponge biomaterials for various applications. We have focused on the potential of biosilica from Petrosia ficidormis for novel biomedical/industrial applications. A bioceramic structure from this sponge was obtained after calcination at 750 °C for 6 h in a furnace. The morphological characteristics of the three-dimensional architecture were evaluated by scanning electron microscopy (SEM) and microcomputed tomography, revealing a highly porous and interconnected structure. The skeleton of P. ficidormis is a siliceous matrix composed of SiO2, which does not present inherent bioactivity. Induction of bioactivity was attained by subjecting the bioceramics structure to an alkaline treatment (2M KOH) and acidic treatment (2M HCl) for 1 and 3 h. In vitro bioactivity of the bioceramics structure was evaluated in simulated body fluid (SBF), after 7 and 14 days. Observation of the structures by SEM, coupled with spectroscopic elemental analysis (EDS), has shown that the surface morphology presented a calcium-phosphate CaP coating, similar to hydroxyapatite (HA). The determination of the Ca/P ratio, together with the evaluation of the characteristic peaks of HA by infrared spectroscopy and X-ray diffraction, have proven the existence of HA. In vitro biological performance of the structures was evaluated using an osteoblast cell line, and the acidic treatment has shown to be the most effective treatment. Cells were seeded on bioceramics structures and their morphology; viability and growth were evaluated by SEM, MTS assay, and DNA quantification, respectively, demonstrating that cells are able to grow and colonize the bioceramic structures. © 2014 American Chemical Society.

© 2014 American Chemical Society. Engineering metabolically demanding tissues requires the supply of nutrients, oxygen, and removal of metabolic byproducts, as well as adequate mechanical properties. In this work, we propose the development of chitosan (CHIT)/alginate (ALG) freestanding membranes fabricated by layer-by-layer (LbL) assembly. CHIT/ALG membranes were cross-linked with genipin at a concentration of 1 mg·mL {\textless} sup {\textgreater} -1 {\textless} /sup {\textgreater} or 5 mg·mL {\textless} sup {\textgreater} -1 {\textless} /sup {\textgreater} . Mass transport properties of glucose and oxygen were evaluated on the freestanding membranes. The diffusion of glucose and oxygen decreases with increasing cross-linking concentration. Mechanical properties were also evaluated in physiological-simulated conditions. Increasing cross-linking density leads to an increase of storage modulus, Young modulus, and ultimate tensile strength, but to a decrease in the maximum hydrostatic pressure. The in vitro biological performance demonstrates that cross-linked films are more favorable for cell adhesion. This work demonstrates the versatility and feasibility of LbL assembly to generate nanostructured constructs with tunable permeability, mechanical, and biological properties.

{{Abstract A variety of N-heterocyclic carbene (NHC) zinc adducts of the type NHC-ZnMe2 {[}2a

A programação concorrente obriga o programador a sincronizar os acessos concorrentes a regiões de memória partilhada, contudo esta abordagem não é suficiente para evitar todas as anomalias que podem ocorrer num cenário concorrente. Executar uma sequência de operações atómicas pode causar violações de atomicidade se existir uma correlação entre essas operações, devendo o programador garantir que toda a sequência de operações é executada atomicamente. Este problema é especialmente comum quando se usam operações de pacotes ou módulos de terceiros, pois o programador pode identificar incorretamente o âmbito das regiões de código que precisam de ser atómicas para garantir o correto comportamento do programa. Para evitar este problema o programador do módulo pode criar um contrato que especifica quais as sequências de operações do módulo que devem ser sempre executadas de forma atómica. Este trabalho apresenta uma análise estática para verificação destes contratos.

Os serviços Web são frequentemente suportados por sistemas com uma arquitetura em camadas, sendo utilizadas bases de dados relacionais para armazenamento dos dados. A replicação dos diversos componentes tem sido uma das formas utilizadas para obter melhorarias de escalabilidade destes serviços. Adicionalmente, a utilização de bases de dados em memória permite alcançar um desempenho mais elevado. No entanto é conhecida a fraca escalabilidade das bases de dados com o número de núcleos em máquinas multi-núcleo. Neste artigo propomos uma nova abordagem para lidar com este problema, intitulada MacroDDB. Utilizando uma solução de replicação hierárquica, a nossa proposta, replica a base da dados em vários nós, sendo que cada nó, por sua vez, executa um conjunto de réplicas da base de dados. Esta abordagem permite assim lidar com a falta de escalabilidade das bases de dados relacionais em máquinas multi-núcleo, o que por sua vez melhora a escalabilidade geral dos serviços.