Publications

Export 46 results:
Sort by: Author [ Title  (Asc)] Type Year
A B C D E F G H I J K L [M] N O P Q R S T U V W X Y Z   [Show ALL]
A
Pereira, J., J. Xavier, J. Morais, and J. Lousada. "Assessing wood quality by spatial variation of elastic properties within the stem: Case study of Pinus pinaster in the transverse plane." Canadian Journal of Forest Research. 44 (2014): 107-117. Abstract
n/a
Fernández-Cabo, J. L., R. Widmann, M. Arce-Blanco, R. Crocetti, J. Xavier, and A. Majano-Majano. "Assessment of wire-frame analysis models of a historical planked timber arch." Proceedings of the Institution of Civil Engineers - Structures and Buildings. 168 (2015): 680-694. AbstractWebsite
n/a
C
Xavier, J., U. Belini, F. Pierron, J. Morais, J. Lousada, and M. Tomazello. "Characterisation of the bending stiffness components of MDF panels from full-field slope measurements." Wood Science and Technology. 47 (2013): 423-441. Abstract
n/a
Raposo, P., J. Martins, J. Correia, Maria E. Salavessa, Cristina Reis, José Xavier, and Abilio M. P. de Jesus. "Characterization of the mechanical behaviour of wooden construction materials from quinta lobeira de cima." International Journal of Structural Integrity. 9 (2018): 396-410. AbstractWebsite

Purpose The antique structures are part of the inheritance that our elders left, being important to preserve their memories. It is important to preserve, rehabilitate and restore the historic buildings protecting the cultural patrimony, attending to the actual comfort and habitability requirements. It is necessary to study the behaviour of the various elements that compose antique structures (masonry and wood) in order to develop assessment measures according to the characteristics of the original materials. The paper aims to discuss these issues. Design/methodology/approach An experimental campaign to characterize the mechanical behaviour of the wood of the roof of the �sequeiro� of �Quinta Lobeira de Cima�, a building from the twentieth century located in Minho, was carried out. The tested wood specimens are from two different species: chestnut and oak. Compression, tension and static flexion tests according to parallel to the grain direction were performed. Other parameters, such as density, moisture content and longitudinal modulus of elasticity in compression and in tension, were also obtained. The measurement of displacements was made with Digital Image Correlation (DIC). Findings The results of this study show the similarity between experimental and empirical values for the studied woods species. Originality/value This original study aimed at characterizing the mechanical properties using DIC of wood of the roof of the �sequeiro� of �Quinta Lobeira de Cima�, a building from the twentieth century located in Minho (Portugal). This study is part of master thesis of Jo�o Martins, an original research work.

Raposo, P. C., J. Martins, J. A. F. O. Correia, M. E. Salavessa, C. Reis, J. M. C. Xavier, and A. M. P. de Jesus. "Characterization of the Tensile Mechanical Behavior of Wooden Construction on Materials from Historic Building." Procedia Structural Integrity. 5 (2017): 1086-1091. AbstractWebsite

Abstract Ancient structures are part of the inheritance our elders left us. These historical inheritance needs to be preserved, so the historic structures need to be rehabilitated and restored, protecting the cultural patrimony and attending to the comfort and habitability required nowadays. In order to accomplish a good and economic rehabilitation is essential to study the behaviour of traditional structures elements (masonry and wood) in order to develop adequate assessment measures and techniques. In this context it was carried out an experimental campaign to characterize the tensile mechanical behavior of the woods from the �sequeiro� wood structure, integral part of the �Quinta de Lobeira de Cima� farm. This building from the 20th century is located in Minho, Portugal. Tensile Tests were carried out for two different species of wood, chestnut and oak. The tensile tests were performed to obtain the tensile strength parallel to the fibers, using the digital image correlation (DIC) for the extension measurement.

Dias, G. F., M. F. S. F. de Moura, J. A. G. Chousal, and J. Xavier. "Cohesive laws of composite bonded joints under mode I loading." Composite Structures. 106 (2013): 646-652. Abstract
n/a
Pinto, V. C., Tiago Ramos, Sofia Alves, J. Xavier, Paulo Tavares, P. M. G. P. Moreira, and Rui Miranda Guedes. "Comparative Failure Analysis of PLA, PLA/GNP and PLA/CNT-COOH Biodegradable Nanocomposites thin Films." Procedia Engineering. 114 (2015): 635-642. AbstractWebsite

Abstract Biodegradable polymers such as poly(lactic) acid (PLA) have been studied for biomaterials applications such as natural human ligament replacement, however these materials could be applied to other sectors as aerospace, aeronautics, automotive, food packaging. \{PLA\} presents a relatively brittle with a mode I fracture behavior, being often blend with other biodegradable or non-degradable polymers to improve its fracture energy. For some existing applications, \{PLA\} components exhibit accumulated permanent deformation resulting from dynamic mechanical inputs, resulting on failure by laxity of parts. Aiming the improvement of \{PLA\} mechanical properties, the inclusion of carbon nanofillers into \{PLA\} matrix, in particular, CNT-COOH and \{GNP\} have been developed, due to their strong sp2 carbon-carbon bondings and their geometric arrangement that enhance mechanical properties of the polymer matrix. \{PLA\} and nanocomposites were produced by melt blending followed by compression molding in a hot press, with small weight percentages of nanofillers added to the matrix. Quasi static tensile tests were performed on a mechanical testing machine (Instron™ ElectroPuls E1000) along with failure analysis of specimens with centered crack with digital image correlation, revealing strain distribution along specimens.

Fernandes, A., J. Lousada, J. Morais, J. Xavier, J. Pereira, and P. Melo-Pinto. "Comparison between neural networks and partial least squares for intra-growth ring wood density measurement with hyperspectral imaging." Computers and Electronics in Agriculture. 94 (2013): 71-81. Abstract
n/a
Xavier, J. C., N. M. Garrido, M. Oliveira, J. L. Morais, P. P. Camanho, and F. Pierron. "A comparison between the Iosipescu and off-axis shear test methods for the characterization of ıt Pinus pinaster Ait." Composites Part A: Applied Science and Manufacturing. 35 (2004): 827-840. Abstract

n/a

Sousa, A. M. R., J. Xavier, M. Vaz, J. J. L. Morais, and V. M. J. Filipe. "Cross-correlation and differential technique combination to determine displacement fields." Strain. 47 (2011): 87-98. Abstract

n/a

D
Silva, F., J. Xavier, F. A. M. Pereira, J. Morais, N. Dourado, and M. F. S. F. de Moura. "Determination of cohesive laws in wood bonded joints under mode I loading using the DCB test." Holzforschung. 67 (2013): 835-959. AbstractWebsite
n/a
Silva, F. G. A., J. J. L. Morais, N. Dourado, J. Xavier, F. A. M. Pereira, and M. F. S. F. de Moura. "Determination of cohesive laws in wood bonded joints under mode II loading using the ENF test." International Journal of Adhesion and Adhesives. 51 (2014): 54-61. AbstractWebsite

n/a

Fernandes, R. M. R. P., J. A. G. Chousal, M. F. S. F. de Moura, and J. Xavier. "Determination of cohesive laws of composite bonded joints under mode II loading." Composites Part B: Engineering. 52 (2013): 269-274. Abstract

n/a

Pereira, F. A. M., M. F. S. F. de Moura, N. Dourado, J. J. L. Morais, J. Xavier, and M. I. R. Dias. "Determination of mode II cohesive law of bovine cortical bone using direct and inverse methods." International Journal of Mechanical Sciences. 138-139 (2018): 448-456. AbstractWebsite

This study presents two alternative methods to determine the cohesive law of bovine cortical bone under mode II loading, employing the End Notched Flexure (ENF) test. The direct method results from the combination of the progress of the mode II strain energy release rate with the crack tip shear displacement, obtained by digital image correlation. The resulting cohesive law is determined by differentiation of this relation relatively to the crack shear displacement. The inverse method employs finite element analyses with cohesive zone modelling, in association with an optimization procedure. The resulting strategy enables determining the cohesive law without establishing a pre-defined shape. The significant conclusion that comes out of this work is that both methods offer consistent results regarding the estimation of the cohesive law in bone. Given that the inverse method dispenses the use of sophisticated equipment to obtain the cohesive law in bone, it can be used as a more convenient procedure to accomplish efficient studies in the context of bone fracture characterization under mode II loading.

Crespo, J., A. Majano-Majano, J. Xavier, and M. Guaita. "Determination of the resistance-curve in Eucalyptus globulus through double cantilever beam tests." Materials and Structures. 51 (2018): 77. AbstractWebsite

The prediction of the fracture behaviour through reliable and practical criteria in the design of structural timber elements and connections has become of great importance and demands a proper fracture characterization of the material. Eucalyptus globulus Labill is envisioned as a hardwood species with great potential for high performance structural purposes because of its major mechanical and durability properties, being so far mainly used in paper industry. Experimental research on the identification of the resistance curves to derive the critical strain energy release rate in Eucalyptus globulus L. under pure mode I and RL crack propagation system is performed by means of Double Cantilever Beam tests. Three different data reduction schemes are compared: the Modified Experimental Compliance Method; and two approaches of the Compliance Based Beam Method. These methods take into account the non negligible damage mechanisms at the fracture process zone and have the advantage of being based exclusively on the specimen compliance following an equivalent crack concept, for which crack length monitoring during testing is not required. The Compliance Based Beam Method turns out to be the most appropriate data reduction scheme to obtain the critical energy release rate in eucalyptus because of its simplicity. Concerning this, a high average value of 720�J/m2 was obtained confirming Eucalyptus globulus L. as a promising hardwood species for timber structural design.

Xavier, J., M. Oliveira, J. J. L. Morais, and M. F. S. F. de Moura. "Determining mode I cohesive law of Pinus pinaster by coupling double cantilever beam test with digital image correlation." Fracture and Structural Integrity. 31 (2015): 13-22. AbstractWebsite

The direct identification of the cohesive law in pure mode I of Pinus pinaster is addressed. The approach couples the double cantilever beam (DCB) test with digital image correlation (DIC). Wooden beam specimens loaded in the radial-longitudinal (RL) fracture propagation system are used. The strain energy release rate in mode I (GI ) is uniquely determined from the load-displacement ( P ?? ) curve by means of the compliance-based beam method (CBBM). This method relies on the concept of equivalent elastic crack length ( eq a ) and therefore does not require the monitoring of crack propagation during test. The crack tip opening displacement in mode I ? ? I w is determined from the displacement field at the initial crack tip. The cohesive law in mode I I I (? ? w ) is then identified by numerical differentiation of the I I G ? w relationship. Moreover, the proposed procedure is validated by finite element analyses including cohesive zone modelling. It is concluded that the proposed data reduction scheme is adequate for assessing the cohesive law in pure mode I of P. pinaster.

Xavier, J., M. Oliveira, J. J. L. Morais, and M. F. S. F. de Moura. "Determining mode İI\} cohesive law of Pinus pinaster by combining the end-notched flexure test with digital image correlation." Construction and Building Materials. 71 (2014): 109-115. Abstract

Abstract This work addresses the direct identification of cohesive law of Pinus pinaster in mode II. The end-notched flexure (ENF) test is selected for mode İI\} loading. The strain energy release rate in mode İI\} (GII) is determined according to the compliance-based beam method (CBBM) by processing the global load�displacement curve, without requirements to monitor the crack length during test. The fracture test is coupled with digital image correlation (DIC) for the local measurement of the crack tip opening displacement in mode İI\} (wII). Using a direct method, the cohesive law in mode İI\} (sII�wII) is determined by differentiating the GII�wII relationship. The procedure is validated from both numerical, using finite element analyses including cohesive zone modelling, and experimental approaches. The methodology and accuracy on this reconstruction is discussed. It is concluded that the proposed data reduction scheme is suitable for assessing the cohesive law of P. pinaster in mode II.

Pereira, F. A. M., M. F. S. F. de Moura, N. Dourado, J. J. L. Morais, J. Xavier, and M. I. R. Dias. "Direct and inverse methods applied to the determination of mode I cohesive law of bovine cortical bone using the DCB test." International Journal of Solids and Structures. 128 (2017): 210-220. AbstractWebsite

Abstract This work addresses the determination of the cohesive law under mode I loading of bovine cortical bone tissue using the Double Cantilever Beam (DCB) test. Direct and inverse methods were proposed to assess the cohesive laws representative of bone fracture under mode I loading. The direct method combines the evolution of the strain energy release rate under mode I loading with the crack tip opening displacement that is monitored by digital image correlation technique. According to this method, the cohesive law is obtained by differentiation of such relation with respect to the crack opening. The inverse procedure is performed through a finite element analysis including cohesive zone modelling, conjointly with a developed optimization algorithm. This identification strategy does not require a pre-established shape of the cohesive law as with the conventional inverse based procedures, which is viewed as a novelty of this work. It was concluded that both methods provide consistent results, being appellative tools concerning systematic and methodical studies dedicated to bone fracture characterization.

Xavier, J., M. Oliveira, P. Monteiro, J. J. L. Morais, and M. F. S. F. Moura. "Direct Evaluation of Cohesive Law in Mode I of Pinus pinaster by Digital Image Correlation." Experimental Mechanics. 54 (2014): 829-840. AbstractWebsite
n/a
Pinto, V. C., T. Ramos, A. S. F. Alves, J. Xavier, P. J. Tavares, P. M. G. P. Moreira, and R. M. Guedes. "Dispersion and failure analysis of PLA, PLA/GNP and PLA/CNT-COOH biodegradable nanocomposites by SEM and DIC inspection." Engineering Failure Analysis. 71 (2017): 63-71. AbstractWebsite

Biodegradable polymers such as PLA have been studied for medical applications, human ligament repair is one of such cases. However, these materials can be applied in other sectors as aerospace, aeronautics, automotive, food packaging. PLA presents a relatively brittle on the mode I fracture behavior, being often blend with other biodegradable or non-degradable polymers to improve its fracture energy. For some existing applications, PLA components exhibit accumulated permanent deformation resulting from dynamic mechanical inputs, resulting on failure by laxity of parts. Aiming the improvement of PLA mechanical properties, the inclusion of carbon nanofillers into PLA matrix, in particular, CNT-COOH and GNP have been developed, due to their strong sp2 carbon-carbon bondings and their geometric arrangement that enhance mechanical properties of the polymer matrix. PLA and nanocomposites were produced by melt blending followed by compression moulding in a hot press, with small weight percentages of nanofillers added to the matrix. Nanocomposites dispersion was evaluated by SEM. Quasi static tensile tests were performed on a mechanical testing machine (Instron� ElectroPuls E1000) along with strain field measurements of specimens with centred crack with digital image correlation, revealing strain distribution along specimens.

Morais, J. J. L., M. F. S. F. de Moura, F. A. M. Pereira, J. Xavier, N. Dourado, M. I. R. Dias, and J. M. T. Azevedo. "The double cantilever beam test applied to mode I fracture characterization of cortical bone tissue." Journal of the Mechanical Behavior of Biomedical Materials. 3 (2010): 446-453. Abstract

n/a

E
Majano-Majano, Almudena, Antonio José Lara-Bocanegra, José Xavier, and José Morais. "Experimental Evaluation of Mode II fracture Properties of Eucalyptus globulus L." Materials. 13 (2020). AbstractWebsite

Eucalyptus globulus Labill is a hardwood species of broad growth in temperate climates, which is receiving increasing interest for structural applications due to its high mechanical properties. Knowing the fracture behaviour is crucial to predict, through finite element models, the load carrying capacity of engineering designs with possibility of brittle failures such as elements with holes, notches, or certain types of joints. This behaviour can be adequately modelled on a macroscopic scale by the constitutive cohesive law. A direct identification of the cohesive law of Eucalyptus globulus L. in Mode II was performed by combining end-notched flexure (ENF) tests with digital image correlation (DIC) for radial-longitudinal crack propagation system. The critical strain energy release for this fracture mode, which represents the material toughness to crack-growth, was determined by applying the Compliance Based Beam Method (CBBM) as data reduction scheme and resulted in a mean value of 1.54 N/mm.

F
Xavier, J., J. R. A. Fernandes, J. J. L. Morais, and O. Frazão. "Fracture behaviour of wood bonded joints under modes I and II by digital image correlation and fibre Bragg grating sensors." Ciência & Tecnologia dos Materiais. 27 (2015): 27-35. AbstractWebsite

Abstract Direct identification of cohesive laws in modes I and İI\} of wood bonded joints is addressed by the double cantilever beam (DCB) and end-notched flexure (ENF) tests, respectively. Moreover, the development and extension of fracture process zone (FPZ) ahead of the initial crack tip, is analysed by means of digital image correlation (DIC) and embedded fibre Bragg grating (FBG) sensors. From \{FBG\} spectral response, the spectrum geometric mean is determined and the strain induced by wavelength variation employed to identify the initial and final stages of the FPZ. These stages are used to consistently define the cohesive laws in both modes I and II. Resistance-curves are determined from the compliance-based beam method (CBBM). Besides, the crack tip opening displacements (CTOD) are determined by post-processing displacement field provided by \{DIC\} around the initial crack tip. The strain energy release rate as a function of the \{CTOD\} are then determined for both mode I and mode II. The respective cohesive laws are reconstructed by numerical approximation and differentiation. It is concluded that the proposed data reduction scheme is effective to determine both the \{FPZ\} development phase and the corresponding cohesive laws of wood bonded joints in both mode I and mode II.

Silva, F., M. de Moura, N. Dourado, J. Xavier, F. Pereira, J. Morais, M. Dias, P. Lourenço, and F. Judas. "Fracture Characterization of Human Cortical Bone Under Mode I Loading." Journal of Biomechanical Engineering. 137 (2015): 121004. AbstractWebsite

A miniaturized version of the double cantilever beam (DCB) test is used to determine the fracture energy in human cortical bone under pure mode I loading. An equivalent crack length based data-reduction scheme is used with remarkable advantages relative to classical methods. Digital image correlation (DIC) technique is employed to determine crack opening displacement at the crack tip being correlated with the evolution of fracture energy. A method is presented to obtain the cohesive law (trapezoidal bilinear softening) mimicking the mechanical behavior observed in bone. Cohesive zone modeling (CZM) (finite-element method) was performed to validate the procedure showing excellent agreement.

Silva, F. G. A., M. F. S. F. de Moura, N. Dourado, J. Xavier, F. A. M. Pereira, J. J. L. Morais, M. I. R. Dias, P. J. Lourenço, and F. M. Judas. "Fracture characterization of human cortical bone under mode II loading using the end-notched flexure test." Medical {&} Biological Engineering {&} Computing. 55 (2017): 1249-1260. AbstractWebsite

Fracture characterization of human cortical bone under mode II loading was analyzed using a miniaturized version of the end-notched flexure test. A data reduction scheme based on crack equivalent concept was employed to overcome uncertainties on crack length monitoring during the test. The crack tip shear displacement was experimentally measured using digital image correlation technique to determine the cohesive law that mimics bone fracture behavior under mode II loading. The developed procedure was validated by finite element analysis using cohesive zone modeling considering a trapezoidal with bilinear softening relationship. Experimental load-displacement curves, resistance curves and crack tip shear displacement versus applied displacement were used to validate the numerical procedure. The excellent agreement observed between the numerical and experimental results reveals the appropriateness of the proposed test and procedure to characterize human cortical bone fracture under mode II loading. The proposed methodology can be viewed as a novel valuable tool to be used in parametric and methodical clinical studies regarding features (e.g., age, diseases, drugs) influencing bone shear fracture under mode II loading.