Publications

Export 14 results:
Sort by: Author Title Type [ Year  (Desc)]
2018
Lameiras, R., J. A. O. Barros, I. B. Valente, J. Xavier, and M. Azenha. "Pull-out behaviour of glass-fibre reinforced polymer perforated plate connectors embedded in concrete. Part II: Prediction of load carrying capacity." Construction and Building Materials. 169 (2018): 142-164. AbstractWebsite

Abstract The authors have recently proposed an innovative connector system that consists on a Glass Fibre Reinforced Polymer (GFRP) perforated plate that is embedded into Steel Fibre Reinforced Self-Compacting Concrete (SFRSCC) layers. The connection is strongly based in the mechanical interlock assured by the dowels originated from the \{SFRSCC\} passing through the holes opened on the \{GFRP\} plates. In this study, an analytical framework to evaluate the load capacity of the connections when loaded transversally was developed based on experimental pull-out tests presented in the companion paper (Part I). For a better understanding of the mechanical behaviour of the connections and to allow to make estimations of the load capacity of connection when it is conditioned by the rupture of the connector itself, pull-out pin-bearing tests with single-hole plates were executed to assess the effect of the type of \{GFRP\} on the strain distribution in the vicinity of the holes until the failure, as well as the estimated failure modes and load capacities of the connections.

Arteiro, A., G. Catalanotti, J. Xavier, P. Linde, and P. P. Camanho. "A strategy to improve the structural performance of non-crimp fabric thin-ply laminates." Composite Structures. 188 (2018): 438-449. AbstractWebsite

The enhanced mechanical performance of thin-ply laminates results from their ability to delay the onset of damage typically observed in composite materials. However, in notched structures, subcritical damage growth causes beneficial stress redistributions in the vicinity of the notch, blunting the stress concentration. Precluding these damage mechanisms, as in thin-ply laminates, may potentially lead to inferior notched responses. To obviate this limitation of thin-ply laminates, a strategy based on the combination of standard grade 0� plies and thin transverse and off-axis plies is analysed in this paper. A detailed study of the effect of 0� ply blocking is carried out, with particular emphasis on the blunting mechanisms and notched response. Tests on scaled notched panels loaded in tension, with notch sizes between 6?mm and 30?mm, show that the combination of standard grade 0� ply blocks with thin transverse and off-axis plies promotes localised fibre-matrix splitting, which acts as an important notch blunting mechanism, while preventing matrix cracking and delamination. This results in an improved notched response and superior large damage capability. It is also shown that thicker 0� ply blocks provide higher stability in composite bolted joints, while the thin transverse and off-axis plies contribute for matrix-dominated damage suppression, resulting in an improved bolt-bearing response. The improvements of the large damage capability and bolt-bearing performance are obtained without compromising the superior unnotched tensile and compressive strengths intrinsic to thin-ply laminates.

2017
Pinto, V. C., T. Ramos, A. S. F. Alves, J. Xavier, P. J. Tavares, P. M. G. P. Moreira, and R. M. Guedes. "Dispersion and failure analysis of PLA, PLA/GNP and PLA/CNT-COOH biodegradable nanocomposites by SEM and DIC inspection." Engineering Failure Analysis. 71 (2017): 63-71. AbstractWebsite

Biodegradable polymers such as PLA have been studied for medical applications, human ligament repair is one of such cases. However, these materials can be applied in other sectors as aerospace, aeronautics, automotive, food packaging. PLA presents a relatively brittle on the mode I fracture behavior, being often blend with other biodegradable or non-degradable polymers to improve its fracture energy. For some existing applications, PLA components exhibit accumulated permanent deformation resulting from dynamic mechanical inputs, resulting on failure by laxity of parts. Aiming the improvement of PLA mechanical properties, the inclusion of carbon nanofillers into PLA matrix, in particular, CNT-COOH and GNP have been developed, due to their strong sp2 carbon-carbon bondings and their geometric arrangement that enhance mechanical properties of the polymer matrix. PLA and nanocomposites were produced by melt blending followed by compression moulding in a hot press, with small weight percentages of nanofillers added to the matrix. Nanocomposites dispersion was evaluated by SEM. Quasi static tensile tests were performed on a mechanical testing machine (Instron� ElectroPuls E1000) along with strain field measurements of specimens with centred crack with digital image correlation, revealing strain distribution along specimens.

Arteiro, A., G. Catalanotti, J. Xavier, P. Linde, and P. P. Camanho. "Effect of tow thickness on the structural response of aerospace-grade spread-tow fabrics." Composite Structures. 179 (2017): 208-223. AbstractWebsite

The effect of ply thickness on the onset of intralaminar and interlaminar damage is extremely important for the structural response of laminated composite structures. This subject has gained particular interest in recent years due to the introduction in the market of spread-tow, ultra-thin carbon-fibre reinforcements with different configurations. In the present paper, an experimental test campaign was carried out to study the structural response of aerospace-grade plain weave spread-tow fabrics (STFs) of different areal weights. The results showed that, in spite of an apparent superior longitudinal tensile strength of the thick STF, the multidirectional thin-STF laminate exhibited an improved tensile unnotched strength over the thick-STF laminate, attributed to its damage suppression capability. However, damage suppression was also responsible for similar tensile notched strengths. In compression, the thin-STF laminate performed substantially better than the thick-STF laminate in both unnotched and notched configurations. Finally, a similar bearing response was obtained in both STF laminates, in spite of a slightly higher resistance of the thin-STF laminate to the propagation of subcritical damage mechanisms.

2016
Furtado, C., A. Arteiro, G. Catalanotti, J. Xavier, and P. P. Camanho. "Selective ply-level hybridisation for improved notched response of composite laminates." Composite Structures. 145 (2016): 1-14. AbstractWebsite

Abstract This work presents an experimental study on the effect of ply-level hybridisation on the tensile unnotched and notched response of composite laminates. In a first assessment, notched tests were performed on laminates with nominal ply thicknesses between 0.03 mm and 0.30 mm. From the understanding of the effect of ply thickness on the damage mechanisms that govern the notched response of laminates, the concept of ply-level hybridisation is introduced, which consists in combining plies of different grades. A uniform combination of thin and conventional plies resulted in a hybrid laminate with intermediate notched response. Selective hybridisation, where thin off-axis plies are combined with thicker 0° plies, resulted in a globally enhanced notched behaviour without compromising the unnotched and fatigue responses. This work clearly shows how ply-level hybridisation, when designed to trigger specific damage mechanisms, can be used to improve the notched response of composite laminates.

2015
Arteiro, A., G. Catalanotti, J. Xavier, and P. P. Camanho. "A Finite Fracture Mechanics Model for the Prediction of the Notched Response and Large Damage Capability of Composite Laminates." Advances in Fracture and Damage Mechanics XIII. Vol. 627. Key Engineering Materials, 627. Trans Tech Publications, 2015. 13-16. Abstract

A new model based on Finite Fracture Mechanics (FFMs) has been proposed to predict the open-hole tensile strength of composite laminates [1]. Failure is predicted when bothstress-based and energy-based criteria are satisfied. This model is based on an analytical solution, and no empirical adjusting parameters are required, but only two material properties: the unnotched strength and the fracture toughness. In the present work, an extension of the proposed FFMs model to predict the notched response of composite laminates with notch geometries other than a circular opening [2] is presented and applied to the prediction of size effects on the tensile and compressive notched strength of composite laminates. The present model is also used to assess the notch sensitivity and brittleness of composite laminates by means of versatile design charts and by the identification of a dimensionless parameter designated as notch sensitivity factor. A further extension of the FFMs model is proposed, which takes into account the crack resistance curve of the laminate in the model's formulation, and it is used to predict the large damage capability of a non-crimp fabric thin-ply laminate [3].

Fernández-Cabo, J. L., R. Widmann, M. Arce-Blanco, R. Crocetti, J. Xavier, and A. Majano-Majano. "Assessment of wire-frame analysis models of a historical planked timber arch." Proceedings of the Institution of Civil Engineers - Structures and Buildings. 168 (2015): 680-694. AbstractWebsite
n/a
Pinto, V. C., Tiago Ramos, Sofia Alves, J. Xavier, Paulo Tavares, P. M. G. P. Moreira, and Rui Miranda Guedes. "Comparative Failure Analysis of PLA, PLA/GNP and PLA/CNT-COOH Biodegradable Nanocomposites thin Films." Procedia Engineering. 114 (2015): 635-642. AbstractWebsite

Abstract Biodegradable polymers such as poly(lactic) acid (PLA) have been studied for biomaterials applications such as natural human ligament replacement, however these materials could be applied to other sectors as aerospace, aeronautics, automotive, food packaging. \{PLA\} presents a relatively brittle with a mode I fracture behavior, being often blend with other biodegradable or non-degradable polymers to improve its fracture energy. For some existing applications, \{PLA\} components exhibit accumulated permanent deformation resulting from dynamic mechanical inputs, resulting on failure by laxity of parts. Aiming the improvement of \{PLA\} mechanical properties, the inclusion of carbon nanofillers into \{PLA\} matrix, in particular, CNT-COOH and \{GNP\} have been developed, due to their strong sp2 carbon-carbon bondings and their geometric arrangement that enhance mechanical properties of the polymer matrix. \{PLA\} and nanocomposites were produced by melt blending followed by compression molding in a hot press, with small weight percentages of nanofillers added to the matrix. Quasi static tensile tests were performed on a mechanical testing machine (Instron™ ElectroPuls E1000) along with failure analysis of specimens with centered crack with digital image correlation, revealing strain distribution along specimens.

2014
Arteiro, A., G. Catalanotti, J. Xavier, and P. P. Camanho. "Large damage capability of non-crimp fabric thin-ply laminates." Composites Part A: Applied Science and Manufacturing. 63 (2014): 110-122. AbstractWebsite
n/a
2013
Arteiro, A., G. Catalanotti, J. Xavier, and P. P. Camanho. "Notched response of non-crimp fabric thin-ply laminates." Composites Science and Technology. 79 (2013): 97-114. Abstract
n/a
Arteiro, A., C. Catalanotti, J. Xavier, and P. P. Camanho. "Notched response of non-crimp fabric thin-ply laminates: analysis methods." Composites Science and Technology. 88 (2013): 165-171. Abstract
n/a
2010
Morais, J. J. L., M. F. S. F. de Moura, F. A. M. Pereira, J. Xavier, N. Dourado, M. I. R. Dias, and J. M. T. Azevedo. "The double cantilever beam test applied to mode I fracture characterization of cortical bone tissue." Journal of the Mechanical Behavior of Biomedical Materials. 3 (2010): 446-453. Abstract

n/a

2009
Xavier, J., S. Avril, F. Pierron, and J. Morais. "Variation of transverse and shear stiffness properties of wood in a tree." Composites Part A: Applied Science and Manufacturing. 40 (2009): 1953-1960. Abstract
n/a
2007
Xavier, J., S. Avril, F. Pierron, and J. Morais. "Novel experimental approach for longitudinal-radial stiffness characterisation of clear wood by a single test." Holzforschung. 61 (2007): 573-581. Abstract
n/a