Ana Rita C. Duarte

Equilibrium solubility of flurbiprofen, a nonsteroidal antiinflammatory agent, in supercritical carbon dioxide was measured by a static analytical method in the pressure range from (8.0 to 25.0) MPa, at temperatures of (303.0, 313.0, and 323.0) K. The cosolvent effect of ethanol in the solubility of the bioactive compound in supercritical carbon dioxide was investigated at 18 MPa and 313 K. The results obtained have a potential application in supercritical processes for this drug. Experimental solubility data were correlated with an empirical density-based Chrastil model.

Ethylcellulose/methylcellulose blends were produced using different precipitation techniques and impregnated with naproxen, a non-steroidal anti-inflammatory drug (NSAID). Solvent-evaporation technique was used not only for the preparation of ethylcellulose/methylcellulose microspheres but also to encapsulate naproxen. Supercritical fluid (SCF) impregnation was also performed to prepare naproxen loaded microspheres. The microspheres, impregnated by the SCF technique, were prepared both by solvent-evaporation and by a supercritical antisolvent (SAS) process. In vitro release profiles at pH 7.4 and 1.2, of naproxen-loaded microspheres were evaluated and the results were modelled Fick's law of diffusion and Power law. Miscrospheres prepared by supercritical antisolvent have a higher loading capacity and present a slower release profile. The systems studied present a release mechanism controlled by drug diffusion which complies Fick's law of diffusion. © 2005 Elsevier B.V. All rights reserved.

The supercritical antisolvent (SAS) technique was used to prepare ethyl cellulose/methyl cellulose blends, two biocompatible polymers commonly used as drug carriers in controlled delivery systems. Ethyl cellulose is widely used as a drug carrier. The drug release of the delivery devices can be controlled to some extent by addition of a water-soluble or water swellable polymer, such as methyl cellulose. This leads to the solubility enhancement of poorly water-soluble molecules. SAS experiments were carried out at different operational conditions and microspheres with mean diameters ranging from 5 to 30 $μ$m were obtained. The effect of CO2 and liquid flow, temperature and pressure on particle size and particle size distribution was evaluated. The microspheres were precipitated from a mixture of dichloromethane (DCM) and dimethylsulfoxide (DMSO) (4:1 ratio). The best process conditions for this mixture were according to our study 40°C and 80 bar. © 2006 Elsevier B.V. All rights reserved.

Mass sorption and diffusion coefficients in one acrylate biocompatible copolymer contacted with supercritical (sc) carbon dioxide are reported. Equilibrium solubility of dense carbon dioxide in poly(methylmethacrylate-co-ethylhexylacrylate-co-ethyleneglycoldimethacr ylate) (P(MMA-EHA-EGDMA)) was studied by a gravimetric method in a temperature range from 308 to 323 K and a pressure range from 10.0 to 20.0 MPa. The cross-linked copolymer presented Fickian behavior and Fick's diffusion model was applied to determine the amount of carbon dioxide present and the diffusion coefficients. Diffusion coefficients for the sorption under supercritical conditions and desorption at ambient conditions were determined and compared. Samples of P(MMA-EHA-EGDMA) with different thickness were used for comparison of the maximum sorption degree. Polymerization conditions were also varied in order to evaluate the influence of the molecular weight of the copolymer in the CO2 sorption process. To investigate the possibility of impregnating this acrylate copolymer with an anti-inflammatory drug, a preliminary experiment was performed. © 2005 Elsevier B.V. All rights reserved.

Herein the preparation of molecularly imprinted polymers (MIPs) using supercritical fluid technology is evaluated. Poly(diethylene glycol dimethacrylate), polyDEGDMA, was synthesised in supercritical carbon dioxide (scCO2) using a carboxylic acid end-capped perfluoropolyether oil as stabiliser. Polymerisations were carried out in the presence of different concentrations of two different template drug molecules, salicylic acid and acetylsalicylic acid. Results suggest that molecular imprinted polymers were successfully prepared by supercritical polymerisation and then impregnated with the template in order to prepare controlled release systems. © 2006 Elsevier B.V. All rights reserved.

Carbon dioxide solubility in a natural biodegradable polymer, namely poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and the diffusion coefficients are reported. Equilibrium solubility of dense carbon dioxide in PHBV was studied by a gravimetric method in a temperature range from 308 to 313 K and a pressure range from 10.0 to 15.0 MPa. The copolymer presented Fickian behavior and Fick's diffusion model was applied to determine the amount of carbon dioxide present in the samples after a predermined exposure time as well as the diffusion coefficients. Diffusion coefficients for the sorption under supercritical (sc) conditions and desorption at ambient conditions were determined and compared. To evaluate the influence of the HV content in the amount of maximum sorption degree of the polymer, different samples of PHBV copolymers were tested and the sorption curves are here presented. © 2006 Elsevier B.V. All rights reserved.

The micronization of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) from organic solutions using supercritical antisolvent (SAS) technique has been successfully achieved. SAS experiments were carried out at different operational conditions and microspheres with mean diameters ranging from 3 to 9 $μ$m were obtained. The effect of CO2 and liquid flow, temperature and pressure on particle size and particle size distribution was evaluated. The microspheres were precipitated from a dichloromethane (DCM) solution. The best process conditions for this mixture were, according to our study, 40 °C, 100 bar, 1 mL min-1 liquid flow and 10 L min-1 carbon dioxide flow. Experiments with polymers containing different HV percentages were carried out. The powders obtained became more spherical as the HV content decreased. © 2006 Elsevier B.V. All rights reserved.

Supercritical fluid impregnation was tested to prepare a new ophthalmic drug delivery device. Poly(methylmethacrylate-co-ethylhexylacrylate-co-ethyleneglycoldimethacr ylate), P(MMA-EHA-EGDMA) has been proposed by Mariz [M. Mariz, Preparação de uma lente intra-ocular dotada de um sistema de libertação controlada de fármaco, Master Thesis, Universidade de Coimbra, 1999] as a promising matrix to be used for intraocular delivery of anti-inflammatory drugs used in eye surgery. This matrix was successfully impregnated with flurbiprofen, a non-steroidal anti-inflammatory agent. The success of the impregnation was evaluated by scanning electron microscopy (SEM) analysis and also by in vitro drug release studies. The effect of some operating parameters was evaluated, namely, pressure and contact time. The operating pressure will influence both the solubility of the drug in the supercritical fluid but also the sorption degree of the polymeric matrix in the presence of carbon dioxide. The solubility of the drug in carbon dioxide and the sorption degree are reported in previous studies. A comparison between the batch and the semi-continuous impregnation process is also presented. The supercritical fluid impregnation proved to be feasible for the preparation of a new ophthalmic drug delivery system. The drug release profiles suggest that the drug can be released up to three months, which is a major advantage for the prevention of the inflammatory response after ophthalmic surgery. © 2007 Elsevier B.V. All rights reserved.

The aim of this study was to develop a new process for the production of bioactive 3D scaffolds using a clean and environmentally friendly technology. The possibility of preparing composite scaffolds of Bioglass?? and a polymeric blend of starch and poly(l-lactic acid) (SPLA50) was evaluated. Supercritical phase-inversion technique was used to prepare inorganic particles loaded starch-based porous composite matrixes in a one-step process for bone tissue engineering purposes. Due to their osteoconductive properties some glasses and ceramics are interesting materials to be used for bone tissue engineering purposes; however their poor mechanical properties create the need of a polymeric support where the inorganic fraction can be dispersed. Samples impregnated with different concentrations of Bioglass?? (10 and 15{%} wt/wt polymer) were prepared at 200??bar and 55????C. The presence of Bioglass?? did not affect the porosity or interconnectivity of the polymeric matrixes. Dynamic mechanical analysis has proven that the modulus of the SPLA50 scaffolds increases when glass particles are impregnated within the matrix. In vitro bioactivity studies were carried out using simulated body fluid and the results show that a calcium-phosphate layer started to be formed after only 1??day of immersion. Chemical analysis of the apatite layer formed on the surface of the scaffold was performed by different techniques, namely EDS and FTIR spectroscopy and X-ray diffraction (XRD). The ion concentration in the simulated body fluid was also carried out by ICP analysis. Results suggest that a bone-like apatite layer was formed. This study reports the feasibility of using supercritical fluid technology to process, in one step, a porous matrix loaded with a bioactive material for tissue engineering purposes. ?? 2009 Elsevier B.V. All rights reserved.

We present some selected results indicating the feasibility of preparing therapeutic finished ophthalmic articles, namely commercially available soft contact lenses, using a supercritical solvent impregnation (SSI) technique. Several commercial soft contact lenses were tested and, among these, four lenses were selected for more complete studies: Nelfilcon A (FocusDailies®, CIBA Vision), Omafilcon A (Proclear® Compatibles, CooperVision), Methafilcon A (Frequency® 55, CooperVision) and Hilafilcon B (SofLens® 59 Comfort, Bausch {&} Lomb). Supercritical carbon dioxide (scCO2) was the chosen supercritical fluid and two ophthalmic drugs were tested: flurbiprofen (a NSAID, hydrophobic) and timolol maleate (an anti-glaucoma drug, hydrophilic). The effects of operational pressure, of impregnation duration and of the addition of a cosolvent (ethanol) were studied on the overall drug loading yields. Depending on the experiment, we employed pressures from 9 up to 16 MPa and impregnation times from 30 up to 180 min. Temperature was kept constant and equal to 313 K. The employed depressurization rates were kept low and between 0.1 and 0.2 MPa/min. Results are discussed in terms of the employed operational conditions and taking in consideration all the possible interactions between supercritical fluids, drugs, cosolvents and the polymers which compose the employed hydrogel contact lenses. In vitro drug release experiments were carried out in order to evaluate the resulting drug release profiles. Obtained results were also compared with drug-loaded contact lenses obtained by conventional drug "soaking" in aqueous solutions. Results also proved that SSI can be considered as a viable, efficient and safe alternative for the impregnation of drugs, including those of hydrophobic character or presenting low aqueous solubility, into commercial soft contact lenses. SSI proved to be a "tunable" process since the variation of the employed operational conditions indicated that it is possible to control the amount of impregnated drug. In the end, the ophthalmic articles were recovered undamaged and without the presence of harmful solvent residues. This method also permits to process already prepared commercial contact lenses, without interfering with their manufacture methods and, after processing, store them for future use. © 2010 Elsevier B.V. All rights reserved.

The application of green chemistry principles in the processing of materials for advanced technologies is a steadily increasing field of research. In this work porous chitin-based materials were developed by combining the processing of chitin using ionic liquids (ILs) as a green solvent together with the use of supercritical fluid technology (SCF) as clean technology. Chitin was dissolved in 1-butyl-3-imidazolium acetate, followed by regeneration of the polymer in ethanol in specific moulds. The IL was removed using Soxhlet extraction and successive steps of extraction with SCF using carbon dioxide/ethanol ratios of 50/50 and 70/30. The developed porous chitin-based structures (ChIL) can be classified as mesoporous materials, with very low density and high porosity. The cytotoxicity of ChIL extracts was investigated using L929 fibroblast-like cells, and the results demonstrated that the produced materials have extremely low cytotoxicity levels. Therefore, the findings suggest that the porous chitin structures may be potential candidates for a number of biomedical applications, including tissue engineering. © 2010 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Human articular cartilage functions under a wide range of mechanical loads in synovial joints, where hydrostatic pressure (HP) is the prevalent actuating force. We hypothesized that the formation of engineered cartilage can be augmented by applying such physiologic stimuli to chondrogenic cells or stem cells, cultured in hydrogels, using custom-designed HP bioreactors. To test this hypothesis, we investigated the effects of distinct HP regimens on cartilage formation in vitro by either human nasal chondrocytes (HNCs) or human adipose stem cells (hASCs) encapsulated in gellan gum (GG) hydrogels. To this end, we varied the frequency of low HP, by applying pulsatile hydrostatic pressure or a steady hydrostatic pressure load to HNC-GG constructs over a period of 3 weeks, and evaluated their effects on cartilage tissue-engineering outcomes. HNCs (10×10 6 cells/mL) were encapsulated in GG hydrogels (1.5{%}) and cultured in a chondrogenic medium under three regimens for 3 weeks: (1) 0.4 MPa Pulsatile HP; (2) 0.4 MPa Steady HP; and (3) Static. Subsequently, we applied the pulsatile regimen to hASC-GG constructs and varied the amplitude of loading, by generating both low (0.4 MPa) and physiologic (5 MPa) HP levels. hASCs (10×10 6 cells/mL) were encapsulated in GG hydrogels (1.5{%}) and cultured in a chondrogenic medium under three regimens for 4 weeks: (1) 0.4 MPa Pulsatile HP; (2) 5 MPa Pulsatile HP; and (3) Static. In the HNC study, the best tissue development was achieved by the pulsatile HP regimen, whereas in the hASC study, greater chondrogenic differentiation and matrix deposition were obtained for physiologic loading, as evidenced by gene expression of aggrecan, collagen type II, and sox-9; metachromatic staining of cartilage extracellular matrix; and immunolocalization of collagens. We thus propose that both HNCs and hASCs detect and respond to physical forces, thus resembling joint loading, by enhancing cartilage tissue development in a frequency- and amplitude-dependant manner. © Copyright 2012, Mary Ann Liebert, Inc.

© 2014 American Institute of Chemical Engineers. Significance: Natural deep eutectic solvents (NADES) are defined as a mixture of two or more solid or liquid components, which at a particular composition present a high melting point depression becoming liquids at room temperature. NADES are constituted by natural molecules and fully represent the green chemistry principles. For these reasons, the authors believe that the submitted manuscript is a highly valuable contribution to the field of green chemistry and chemical engineering. For the first time, the possibility to use NADES as enhancers of supercritical fluid technology is revealed.

The design and production of structures with nanometer-sized polymer films based on layer-by-layer (LbL) are of particular interest for tissue engineering since they allow the precise control of physical and biochemical cues of implantable devices. In this work, a method is developed for the preparation of nanostructured hollow multilayers tubes combining LbL and template leaching. The aim is to produce hollow tubes based on polyelectrolyte multilayer films with tuned physical-chemical properties and study their effects on cell behavior. The final tubular structures are characterized by differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), microscopy, swelling, and mechanical tests, including dynamic mechanical analysis (DMA) in physiological simulated conditions. It is found that more robust films could be produced upon chemical cross-linking with genipin. In particular, the mechanical properties confirms the viscoelastic properties and a storage and young modulus about two times higher. The water uptake decreases from about 390{%} to 110{%} after the cross-linking. The biological performance is assessed in terms of cell adhesion, viability, and proliferation. The results obtained with the cross-linked tubes demonstrate that these are more suitable structures for cell adhesion and spreading. The results suggest the potential of these structures to boost the development of innovative tubular structures for tissue engineering approaches.

Green technology actively seeks new solvents to replace common organic solvents that present inherent toxicity and have high volatility, leading to evaporation of volatile organic compounds to the atmosphere. Over the past two decades, ionic liquids (ILs) have gained enormous attention from the scientific community, and the number of reported articles in the literature has grown exponentially. Nevertheless, IL "greenness" is often challenged, mainly due to their poor biodegradability, biocompatibility, and sustainability. An alternative to ILs are deep eutectic solvents (DES). Deep eutectic solvents are defined as a mixture of two or more components, which may be solid or liquid and that at a particular composition present a high melting point depression becoming liquids at room temperature. When the compounds that constitute the DES are primary metabolites, namely, aminoacids, organic acids, sugars, or choline derivatives, the DES are so called natural deep eutectic solvents (NADES). NADES fully represent green chemistry principles. Can natural deep eutectic solvents be foreseen as the next generation solvents and can a similar path to ionic liquids be outlined? The current state of the art concerning the advances made on these solvents in the past few years is reviewed in this paper, which is more than an overview on the different applications for which they have been suggested, particularly, biocatalysis, electrochemistry, and extraction of new data. Citotoxicity of different NADES was evaluated and compared to conventional imidazolium-based ionic liquids, and hints at the extraction of phenolic compounds from green coffee beans and on the foaming effect of NADES are revealed. Future perspectives on the major directions toward which the research on NADES is envisaged are here discussed, and these comprised undoubtedly a wide range of chemically related subjects. © 2014 American Chemical Society.

In this work, blends of starch and poly-$ε$-caprolactone (PCL) doped with different concentrations of 1-butyl-3-methylimidazolium acetate ([BMIM]Ac) or 1-butyl-3-methylimidazolium chloride ([BMIM] Cl) were studied. The blends were characterized by mechanical analysis, infra-red spectroscopy (FTIR), differential scanning calorimetry (DSC) and dielectric relaxation spectroscopy (DRS), evaluating the IL doping effect. The samples were subjected to supercritical carbon dioxide foaming and the morphology of the structures was assessed. DSC shows a single glass transition and melting endotherm for foamed and unfoamed samples, having no effect upon IL doping, and DRS shows increased molecular mobility for blends with higher IL concentrations, and some hindrance for lower ones. The conductivity for SPCL doped with 30{%} [BMIM] Cl, before and after foaming, is comparable to the conductivity of the IL but exhibits more stable conductivity values, opening doors for applications as self-supported conductive materials. © 2014 the Partner Organisations.

Some approaches have been developed in our group to investigate the role of novel ionic liquids as process and property modifiers of natural-based polymers. In our previous work, we proposed the use of ionic liquids as plasticizing agents for the creation of porous structures from a semi-crystalline natural-based polymer. The current work intended to complement the previous studies, evaluating the ability of ionic liquid (IL) to plasticize polymers such as blends of starch-poly-lactic acid (SPLA) and its effect on supercritical fluid foaming process (SCF) and providing more insights on the mechanisms involved. For this purpose, blends of starch with poly (lactic) acid, with different ratios of starch and poly-lactic acid of 50:50 and 30:70 were modified and processed using 1-butyl-3-methylimidazolium chloride ([bmim]Cl). Supercritical fluid foaming was studied at different soaking times (1, 3 and 6h) using carbon dioxide at 20.0MPa and 40°C. The blends were characterized by different techniques, such as infra-red spectroscopy, differential scanning calorimetry and compression and tensile mechanical analysis. The morphology of the foamed structures was analyzed by scanning electron microscopy and micro-computed tomography. The results suggest that after 3h of soaking time an equilibrium state of carbon dioxide into the bulk samples is attained, yielding structures with 6{%} and 15{%} of porosity, for SPLA70 and SPLA50 respectively. The solubility of carbon dioxide within the matrices was studied for the same conditions and the results demonstrate a higher sorption degree in the samples doped with ionic liquid. Sorption and desorption diffusion coefficients of supercritical CO 2 in the SPLA matrix were determined for the raw polymer and for the SPLA doped with [bmim]Cl. It was found that the lower desorption diffusion coefficients are related with the higher porosity obtained by the foaming process. © 2013.

© 2014 American Chemical Society. Engineering metabolically demanding tissues requires the supply of nutrients, oxygen, and removal of metabolic byproducts, as well as adequate mechanical properties. In this work, we propose the development of chitosan (CHIT)/alginate (ALG) freestanding membranes fabricated by layer-by-layer (LbL) assembly. CHIT/ALG membranes were cross-linked with genipin at a concentration of 1 mg·mL {\textless} sup {\textgreater} -1 {\textless} /sup {\textgreater} or 5 mg·mL {\textless} sup {\textgreater} -1 {\textless} /sup {\textgreater} . Mass transport properties of glucose and oxygen were evaluated on the freestanding membranes. The diffusion of glucose and oxygen decreases with increasing cross-linking concentration. Mechanical properties were also evaluated in physiological-simulated conditions. Increasing cross-linking density leads to an increase of storage modulus, Young modulus, and ultimate tensile strength, but to a decrease in the maximum hydrostatic pressure. The in vitro biological performance demonstrates that cross-linked films are more favorable for cell adhesion. This work demonstrates the versatility and feasibility of LbL assembly to generate nanostructured constructs with tunable permeability, mechanical, and biological properties.

© 2015 Elsevier B.V. Abstract Deep eutectic solvents (DES) can be formed by bioactive compounds or pharmaceutical ingredients. A therapeutic DES (THEDES) based on ibuprofen, a non-steroidal anti-inflammatory drug (NSAID), and menthol was synthesized and its thermal behavior was analyzed by differential scanning calorimetry (DSC). A controlled drug delivery system was developed by impregnating a starch:poly-Ï$μ$-caprolactone polymeric blend (SPCL 30:70) with the menthol:ibuprofen THEDES in different ratios (10 and 20 wt{%}), after supercritical fluid sintering at 20 MPa and 50 °C. The morphological characterization of SPCL matrices impregnated with THEDES was performed by scanning electron microscopy (SEM) and micro-computed tomography (micro-CT). Drug release studies were carried out in a phosphate buffered saline. The results obtained provide important clues for the development of carriers for the sustainable delivery of bioactive compounds.

THEDES, so called therapeutic deep eutectic solvents are here defined as a mixture of two components, which at a particular molar composition become liquid at room temperature and in which one of them is an active pharmaceutical ingredient (API). In this work, THEDES based on menthol complexed with three different APIs, ibuprofen (ibu), BA (BA) and phenylacetic acid (PA), were prepared. The interactions between the components that constitute the THEDES were studied by NMR, confirming that the eutectic system is formed by H-bonds between menthol and the API. The mobility of the THEDES components was studied by PFGSE NMR spectroscopy. It was determined that the self-diffusion of the species followed the same behavior as observed previously for ionic liquids, in which the components migrate via jumping between voids in the suprastructure created by punctual thermal fluctuations. The solubility and permeability of the systems in an isotonic solution was evaluated and a comparison with the pure APIs was established through diffusion and permeability studies carried out in a Franz cell. The solubility of the APIs when in the THEDES system can be improved up to 12 fold, namely for the system containing ibu. Furthermore, for this system the permeability was calculated to be 14 × 10−5 cm/s representing a 3 fold increase in comparison with the pure API. With the exception of the systems containing PA an increase in the solubility, coupled with an increase in permeability was observed. In this work, we hence demonstrate the efficiency of THEDES as a new formulation for the enhancement of the bioavailability of APIs by changing the physical state of the molecules from a solid dosage to a liquid system.