Ana Luísa M. de Carvalho

Uracil-DNA glycosylases (UDGs) are widely used to prevent carryover contamination in nucleic acid amplification–based diagnostics; however, existing thermolabile UDGs exhibit limited thermal inactivation windows for emerging applications. Here, we combine evolutionary mining, structural analysis, and structure-guided saturation mutagenesis to define non-catalytic determinants that tune UDG thermolability without compromising catalytic function. From 8482 bacterial UDG sequences, we assembled a 24-member diversity panel and identified UDG_7 as a naturally thermolabile scaffold coupling robust low-temperature activity with sharp inactivation near 45 °C. The crystal structure of UDG_7 reveals a canonical family-I α/β fold with a fully conserved active site, closely resembling both mesophilic human and Escherichia coli UDGs and thermolabile cod UDG. These structural insights guided the design of a single-site variant library targeting 48 non-catalytic positions involved in packing and electrostatic networks. Pooled thermal shift assays distinguished a rigid structural core from 16 surface thermolability hotspots. A high-throughput functional screening of 480 single mutants yielded 114 clones with a desirable “on–off–off” profile and, after sequence consolidation, identified 54 unique variants that retained activity at 25 °C but lost activity at 30 to 37.5 °C. Biochemical characterization revealed nine single substitutions, Q51I, T112Y, V144M, D167F, R201F, R201Y, D219M, R221P, and R221D, that markedly lower the melting temperature while preserving near-native activity. Together, these results indicate that UDG_7 thermolability is encoded by a distributed, surface-biased electrostatic network that can be selectively disrupted without perturbing the conserved catalytic core, shifting the functional inactivation boundary downward and supporting robust carryover control under low-temperature amplification constraints.

TheBacteroides thetaiotaomicronhas developed a consortium of enzymes capable of overcoming steric constraints and degrading, in a sequential manner, the complex rhamnogalacturonan II (RG-II) polysaccharide. BT0996 protein acts in the initial stages of the RGII depolymerisation, where its two catalytic modules remove the terminal monosaccharides from RG-II side chains A and B. BT0996 is modular and has three putative carbohydrate-binding modules (CBMs) for which the roles in the RG-II degradation are unknown. Here, we present the characterisation of themoduleat the C-terminal domain, which we designated BT0996C. The high-resolution structure obtained by X-ray crystallography reveals that the protein displays a typical β-sandwich fold with structural similarity to CBMs assigned to families 6 and 35. The distinctive features are: 1) the presence of several charged residues at the BT0996-C surface creating a large, broad positive lysine-rich patch that encompasses the putative binding site; and 2) the absence of the highly conserved binding-site signatures observed in CBMs from families 6 and 35, such as region A tryptophan and region C asparagine. These findings hint at a binding mode of BT0996-C not yet observed in its homologues. In line with this, carbohydrate microarrays and microscale thermophoresis show the ability of BT0996-C to bind α1-4-linked polygalacturonic acid, and that electrostatic interactions are essential for the recognition of the anionic polysaccharide. The results support the hypothesis that BT0996-C may have evolved to potentiate the action of BT0996 catalytic modules on the complex structure of RG-II by binding to the polygalacturonic acid backbone sequence.

Interactions of glycan-specific epitopes to human lectin receptors represent novel immune checkpoints for investigating cancer and infection diseases. By employing a multidisciplinary approach that combines isothermal titration calorimetry, NMR spectroscopy, molecular dynamics simulations, and X-ray crystallography, we disclosed the molecular determinants that govern the recognition of the tumour and pathogenic glycobiomarker LacdiNAc (GalNAc?1-4GlcNAc, LDN), including their comparison with the ubiquitous LacNAc epitope (Gal?1-4GlcNAc, LN), by two human immune-related lectins, galectin-3 (hGal-3) and the macrophage galactose C-type lectin (hMGL). A different mechanism of binding and interactions is observed for the hGal-3/LDN and hMGL/LDN complexes, which explains the remarkable difference in the binding specificity of LDN and LN by these two lectins. The new structural clues reported herein are fundamental for the chemical design of mimetics targeting hGal-3/hMGL recognition process.

n/a

Overexpression of the Thomsen-Friedenreich (TF) antigen in cell membrane proteins occurs in 90% of adenocarcinomas. Additionally, the binding of the TF-antigen to human galectin-3 (Gal-3), also frequently overexpressed in malignancy, promotes cancer progression and metastasis. In this context, structures that interfere with this specific interaction display the potential to prevent cancer metastasis. Herein, a multidisciplinary approach, combining the optimized synthesis of a TF-antigen mimetic with NMR, X-ray crystallography methods and isothermal titration calorimetry assays has been employed to unravel the molecular structural details that govern the Gal-3/TF-mimetic interaction. The TF-mimetic presents a binding affinity for Gal-3 similar to the TF-natural antigen and retains the binding epitope and the bioactive conformation observed for the native antigen. Furthermore, from a thermodynamic perspective a decrease in the enthalpic contribution was observed for the Gal-3/TF-mimetic complex, however this behaviour is compensated by a favourable entropy gain. From a structural perspective, these results establish our TF-mimetic as a scaffold to design multivalent solutions to potentially interfere with Gal-3 aberrant interactions and likely be used to hamper Gal-3-mediated cancer cells adhesion and metastasis.

The p53 tumor suppressor is widely found to be mutated in human cancer. This protein is regarded as a molecular hub regulating different cell responses, namely cell death. Compelling data have demonstrated that the impairment of p53 activity correlates with tumor development and maintenance. For these reasons, the reactivation of p53 function is regarded as a promising strategy to halt cancer. In the present work, the recombinant mutant p53R280K DNA binding domain (DBD) was produced for the first time, and its crystal structure was determined in the absence of DNA to a resolution of 2.0 Å. The solved structure contains four molecules in the asymmetric unit, four zinc(II) ions, and 336 water molecules. The structure was compared with the wild-type p53 DBD structure, isolated and in complex with DNA. These comparisons contributed to a deeper understanding of the mutant p53R280K structure, as well as the loss of DNA binding related to halted transcriptional activity. The structural information derived may also contribute to the rational design of mutant p53 reactivating molecules with potential application in cancer treatment.

The functional and biological significance of the selected CASP12 targets are described by the authors of the structures. The crystallographers discuss the most interesting structural features of the target proteins and assess whether these features were correctly reproduced in the predictions submitted to the CASP12 experiment. This article is protected by copyright. All rights reserved.

Glucans are polymers of D-glucose with differing linkages in linear or branched sequences. They are constituents of microbial and plant cell-walls and involved in important bio-recognition processes including immunomodulation, anti-cancer activities, pathogen virulence and plant cell-wall biodegradation. Translational possibilities for these activities in medicine and biotechnology are considerable. High-throughput micro-methods are needed to screen proteins for recognition of specific glucan sequences as a lead to structure-function studies and their exploitation. We describe construction of a glucome microarray, the first sequence-defined glycome-scale microarray, using a designer approach from targeted ligand-bearing glucans in conjunction with a novel high-sensitivity mass spectrometric sequencing method, as a screening tool to assign glucan recognition motifs. The glucome microarray comprises 153 oligosaccharide probes with high purity, representing major sequences in glucans. The negative-ion electrospray tandem mass spectrometry with collision-induced dissociation was used for complete linkage analysis of gluco-oligosaccharides in linear homo and hetero and branched sequences. The system is validated using antibodies and carbohydrate-binding modules known to target α- or β-glucans in different biological contexts, extending knowledge on their specificities, and applied to reveal new information on glucan recognition by two signalling molecules of the immune system against pathogens: Dectin-1 and DC-SIGN. The sequencing of the glucan oligosaccharides by the MS method and their interrogation on the microarrays provides detailed information on linkage, sequence and chain length requirements of glucan-recognizing proteins, and are a sensitive means of revealing unsuspected sequences in the polysaccharides.

Macromolecular X-ray crystallography is an important and powerful technique in drug discovery, used by pharmaceutical companies in the discovery process of new medicines. The detailed analysis of crystal structures of protein-ligand complexes allows the study of the specific interactions of a particular drug with its protein target at the atomic level. It is used to design and improve drugs. The starting point of these studies is the preparation of suitable crystals of complexes with potential ligands, which can be achieved by using different strategies described in this chapter. In addition, an introduction to X-ray crystallography is given, highlighting the fundamental steps necessary to determine the three-dimensional structure of protein-ligand complexes, as well as some of the tools and criteria to validate crystal structures available in databases.

We report the three-dimensional crystal structure of acidic seminal fluid protein (aSFP), a 12.9 kDa poly-peptide of the spermadhesin family isolated from bovine seminal plasma, solved by the multiple isomorphous replacement method and refined with data to 1.9 Angstrom resolution with a final R-factor of 17.3%. aSFP is built by a single CUB domain architecture, a 100 to 110 amino-acid-residue extracellular module found in 16 functionally diverse proteins. The structure of aSFP reveals that the CUB domain displays a beta-sandwich topology organised into two 5-stranded beta-sheets, each of which contain two parallel and four antiparallel strands. The structure of aSFP is almost identical to that of porcine spermadhesins PSP-I and PSP-II, which in turn show limited structural similarity with jellyroll topologies of certain virus capsid proteins. Essentially, topologically conserved residues in these proteins are those internal amino acids forming the hydrophobic core of the CUB and the jellyroll domains, suggesting their importance in maintaining the integrity of these protein folds, On the other hand, the structure of aSFP shows structural features that are unique to this protein and which may provide a structural ground for understanding the distinct biological properties of different members of the spermadhesin protein family. (C) 1997 Academic Press Limited.

Spermadhesins, 12,000-14,000 M-r mammalian proteins, include lectins involved in sperm-egg binding and display a single CUB domain architecture. We report the crystal structures of porcine seminal plasma PSP-I/PSP-II, a heterodimer of two glycosylated spermadhesins. and bovine aSFP at 2.4 Angstrom and 1.9 Angstrom resolution respectively.

{Bovine acidic seminal fluid protein (aSFP) is a 12.9 kDa polypeptide of the spermadhesin family built by a single CUB domain architecture. The CUB domain is an extracellular module present in 16 functionally diverse proteins. To determine the three-dimensional structure of aSFP, the protein was crystallized at 21 degrees C by vapor diffusion in hanging drops, using ammonium sulfate, pH 4.7, and polyethyleneglycol 4000 as precipitants, containing 10% dioxane to avoid the formation of clustered crystals. Elongated prismatic crystals with maximal size of 0.6 x 0.3 x 0.2 mm(3) diffract to beyond 1.9 Angstrom resolution and belong to space group P2(1)2(1)2, with cell parameters a = 52.4 Angstrom