International Journal of Mass Spectrometry, 348 (2013) 1-8. doi:10.1016/j.ijms.2013.02.011

International Journal of Mass Spectrometry, 348 (2013) 1-8. doi:10.1016/j.ijms.2013.02.011

Here we report on the structural, optical, electrical and magnetic properties of Co-doped and (Co,Mo)-codoped SnO2 thin films deposited on r-cut sapphire substrates by pulsed laser deposition. Substrate temperature during deposition was kept at 500 degrees C. X-ray diffraction analysis showed that the undoped and doped films are crystalline with predominant orientation along the {[}1 0 1] direction regardless of the doping concentration and doping element. Optical studies revealed that the presence of Mo reverts the blue shift trend observed for the Co-doped films. For the Co and Mo doping concentrations studied, the incorporation of Mo did not contribute to increase the conductivity of the films or to enhance the ferromagnetic order of the Co-doped films. (C) 2012 Elsevier B.V. All rights reserved.

n/a

In this work, we obtained a charge state distribution inside an Ar plasma produced by an electron–cyclotron-resonance ion source. The processes that lead to the observed lines in x-ray spectra are identified and included in the simulated x-ray spectrum. The geometrical constraints of the flat double crystal spectrometer, used to measure the x-ray spectrum, are investigated as they are crucial for correctly obtaining the ion densities from the observed transition amplitudes. Multiple electron impact ionization is included, and a realistic electron velocity distribution is taken into account. The charge state distribution of the Ar ions is compared to measured extracted ionic currents.

Cement bonded particle board (CBPB) is a composite material produced in plates consisting mainly of wood and cement, and may contain additives. This material is currently used in cladding, raised floors, dropped ceilings, prefabricated houses, office containers and various supplies to the building industry such as kitchens, bathrooms and furniture. It is composed of a type of wood Pinus pinaster and/or Pinus pinea, Portland cement type II, sodium silicate and aluminium sulphate. CBPB has been the subject of several studies with the purpose of enabling the use of other types of wood or even vegetable biomass, as the chemical compounds from wood (extractives and sugars) tend to inhibit of cement hydration. A study on the behaviour of short CBPB elements under compression was carried out in the Department of Civil Engineering of Universidade NOVA de Lisboa with the aim of enabling its use in structural elements. The study was supported by VIROC, the company which produces CBPB in Portugal. This paper presents and analyses the most significant results of a campaign of axial compression tests performed on 111 specimens of different heights and cross sections. The behaviour of CBPB specimens of varying slenderness was subjected to a more detailed analysis.

The goal of this paper is to present a comparison among three known metaheuristics: Genetic Algorithm (GA), Particle Swarm Optimization (PSO) and Simulated Annealing (SA). For the comparison, the design of an LC - Voltage Controlled Oscillator (LC-VCO) is considered, where the minimization of both VCO phase noise and power consumption is envisaged. The objective of this comparison is to find the algorithm yielding the best solution. The validity of the solution obtained with each metaheuristic algorithm is checked against HSPICE/RF simulation results. Robustness checks for each algorithm are presented at the end of this paper.

The non-avian saurischians that have associated eggshells and embryos are represented only by the sauropodomorph Massospondylus and Coelurosauria (derived theropods), thus missing the basal theropod representatives. We report a dinosaur clutch containing several crushed eggs and embryonic material ascribed to the megalosaurid theropod Torvosaurus. It represents the first associated eggshells and embryos of megalosauroids, thus filling an important phylogenetic gap between two distantly related groups of saurischians. These fossils represent the only unequivocal basal theropod embryos found to date. The assemblage was found in early Tithonian fluvial overbank deposits of the Lourinhã Formation in West Portugal. The morphological, microstructural and chemical characterization results of the eggshell fragments indicate very mild diagenesis. Furthermore, these fossils allow unambiguous association of basal theropod osteology with a specific and unique new eggshell morphology.

The present work focuses on a qualitative analysis of localised I-V characteristics based on the nanostructure morphology of highly dense arrays of p-type NiO nano-pillars (NiO-NPs). Vertically aligned NiO-NPs have been grown on different substrates by using a glancing angle deposition (GLAD) technique. The preferred orientation of as grown NiO-NPs was controlled by the deposition pressure. The NiO-NPs displayed a polar surface with a microscopic dipole moment along the (111) plane (Tasker's type III). Consequently, the crystal plane dependent surface electron accumulation layer and the lattice disorder at the grain boundary interface showed a non-uniform current distribution throughout the sample surface, demonstrated by a conducting AFM technique (c-AFM). The variation in I-V for different points in a single current distribution grain (CD-grain) has been attributed to the variation of Schottky barrier height (SBH) at the metal-semiconductor (M-S) interface. Furthermore, we observed that the strain produced during the NiO-NPs growth can modulate the SBH. Inbound strain acts as an external field to influence the local electric field at the M-S interface causing a variation in SBH with the NPs orientation. This paper shows that vertical arrays of NiO-NPs are potential candidates for nanoscale devices because they have a great impact on the local current transport mechanism due to its nanostructure morphology.

The sign language is widely used by deaf people around the globe. As the spoken languages, several sign languages do exist. The way sign language is learned by deaf people may have some details to be improved, but one can state that the existing learning mechanisms are effective when we talk about a deaf child, for example. The problem arises for the non-deaf persons that communicate with the deaf persons – the so-called listeners. If, for example, one couple has a new child that turns to be deaf, these two persons find a challenge to learn the sign language. In one hand, they cannot stop their working life, especially because of this sad news turns to be more costly, on the other hand, the existing mechanisms target the deaf-persons and are not prepared for the listeners. This paper proposes a new playful approach to help these listeners to learn the sign language. The proposal is a serious game composed of two modes: School-mode and Competition-mode. The first provides a school-like environment where the user learns the letter-signs and the second provides the user an environment used towards testing the learned skills. Behind the scenes, the proposal is based on two phases: 1 – the creation of a gestures library, relying on the Kinect depth camera; and 2 – the real-time recognition of gestures, by comparing what the depth camera information to the existing gestures previously stored in the library. A prototype system, supporting only the Portuguese sign language alphabet, was developed – the Kinect-Sign – and tested in a Portuguese Sign-Language school resulting in a joyful acceptance of the approach.