The managerial strategies towards Industry 4.0 were coupled with the emergent normativity on incentive policies to enable automation improvements and industry realignment for new automotive value chains. In other words, the national framework to support company incentives for the concept of Industry 4.0 initiatives has pushed automotive industry managers to establish strategies of new investment on automation and repositioning in the global value chain.
Similarly, the scarcity of available qualifications for Industry 4.0, makes the share of "high road" jobs stable. The qualification process in the automotive industry has increased in parallel with the investment on automation.
An important contribution to this increase on job skills is significantly based on existing vocational training policies, which enable the incoming of higher skilled young job seekers, and a lifelong training and requalification of workers in the automotive sector. We have studied the training offer on “mechatronics” for the automotive sector, including both the manufacturing and repair activities. Data indicates a trend of increase of demand for mechatronic trained technicians with higher skills and preparedness for tasks related to automation, programming, maintenance and production control.
How about compensation? short- and long-term job stability? The young professionals that are seeking for a job in an OEM of the automotive sector, or even in a component provider in this sector, have higher probability and expectations of have better wage income and longer-term job stability due to his specialized skills. We have confirmed these results in our preliminary interviews with vocational training centres and company managers.
The managerial jobs are still privileged in the process realignment of industry, even in those case where the electrification technology tends to replace the ICE one. However, these cases are very limited in Portugal. Only Caetanobus and Mitsubishi-Daimler Fuso are producing electrical vehicles. The other OEMs are in a slower process of technological modernization. The choices over the application of principles of Industry 4.0 concept in their premises implied the recruitment of more jobs with the qualification on mechatronics, and managerial jobs to coordinate and control this technological transformation. In this sense, results do not support the conclusion that these managerial jobs are being eroded.
In parallel, there is an evolution of skills for specialized work clusters (automation, robotics, engine electrification). In our research we verified that the mechatronic trained young professionals are occupying jobs related to automation and robotics. But the skills related to the propulsion technologies based on electrification have a different requirement. Although, mechatronics is mostly related to Industry 4.0 strategy, it is expected that the energy transition will induce changes in the training contents of mechatronic. Some interviews also confirmed this trend. Thus, we can expect the emergence of two work clusters around a) Industry 4.0 competences and b) powertrain electrification.

ABSTRACT Modern birds are typified by the presence of feathers, complex evolutionary innovations that were already widespread in the group of theropod dinosaurs (Maniraptoriformes) that include crown Aves. Squamous or scaly reptilian-like skin is, however, considered the plesiomorphic condition for theropods and dinosaurs more broadly. Here, we review the morphology and distribution of non-feathered integumentary structures in non-avialan theropods, covering squamous skin and naked skin as well as dermal ossifications. The integumentary record of non-averostran theropods is limited to tracks, which ubiquitously show a covering of tiny reticulate scales on the plantar surface of the pes. This is consistent also with younger averostran body fossils, which confirm an arthral arrangement of the digital pads. Among averostrans, squamous skin is confirmed in Ceratosauria (Carnotaurus), Allosauroidea (Allosaurus, Concavenator, Lourinhanosaurus), Compsognathidae (Juravenator), and Tyrannosauroidea (Santanaraptor, Albertosaurus, Daspletosaurus, Gorgosaurus, Tarbosaurus, Tyrannosaurus), whereas dermal ossifications consisting of sagittate and mosaic osteoderms are restricted to Ceratosaurus. Naked, non-scale bearing skin is found in the contentious tetanuran Sciurumimus, ornithomimosaurians (Ornithomimus) and possibly tyrannosauroids (Santanaraptor), and also on the patagia of scansoriopterygids (Ambopteryx, Yi). Scales are surprisingly conservative among non-avialan theropods compared to some dinosaurian groups (e.g. hadrosaurids); however, the limited preservation of tegument on most specimens hinders further interrogation. Scale patterns vary among and/or within body regions in Carnotaurus, Concavenator and Juravenator, and include polarised, snake-like ventral scales on the tail of the latter two genera. Unusual but more uniformly distributed patterning also occurs in Tyrannosaurus, whereas feature scales are present only in Albertosaurus and Carnotaurus. Few theropods currently show compelling evidence for the co-occurrence of scales and feathers (e.g. Juravenator, Sinornithosaurus), although reticulate scales were probably retained on the mani and pedes of many theropods with a heavy plumage. Feathers and filamentous structures appear to have replaced widespread scaly integuments in maniraptorans. Theropod skin, and that of dinosaurs more broadly, remains a virtually untapped area of study and the appropriation of commonly used techniques in other palaeontological fields to the study of skin holds great promise for future insights into the biology, taphonomy and relationships of these extinct animals.

ABSTRACTCrocodylomorph eggs and eggshells are known as old as the Late Jurassic and are frequent components of most multiootaxic eggshell assemblages. Classified within the oofamily Krokolithidae, thei histo- and ultrastructures are conservative throughout geological time, characterised by inverted-trapezoid-shaped shell units that grow from highly spaced basal knobs and present a diagnostic tabular ultrastructure. Here, we report 327 eggshell fragments from a new fossil site from the Maastrichtian of the Southern Pyrenees, Veracruz 1, and erect a new oogenus and oospecies, Pachykrokolithus excavatum oogen. et oosp. nov. characterised by crocodyloid morphotype and a prominent rugosocavate ornamentation. Eggshells from the slightly older locality of Blasi 2b, previously reported as aff. Krokolithidae, are also assigned to this new ootaxon. Different crocodylomorph taxa coexisted during the Late Cretaceous of the Tremp Basin, hindering the attribution of Pachykrokolithus excavatum oogen. et oosp. nov. to a single clade. Nevertheless, allodaposuchid eusuchians were dominant in this ecosystem, and are the most probable producers of Pachykrokolithus excavatum oogen. et oosp. nov. eggs.

n/a

In this paper we compute the rank and exhibit a presentation for the monoids
of all $P$-stable and $P$-order preserving partial permutations on a finite set
$\Omega$, with $P$ an ordered uniform partition of $\Omega$. These (inverse)
semigroups constitute a natural class of generators of the pseudovariety of
inverse semigroups ${\sf NO}$ of all normally ordered (finite) inverse
semigroups.

The record of Late Jurassic stegosaur tracks from the Lourinhã Formation (Kimmeridgian-Tithonian) is here revised. Thirty-eight dinosaur tracks, preserved as natural infill casts, are here reported, and thirty-two of them are attributed to the ichnogenus Deltapodus. Four of those present impressions of skin, with polygonal scales and random pattern. Deltapodus is the most common ichnogenus in the track record of the Lourinhã Formation. The sizes and shape suggest one single dacentrurine trackmaker, which could be Miragaia longicollum, also common in the same horizons.

n/a

The Chalcolithic period in the Lisbon region, Portugal, is usually divided into three phases chronologically: the Early Chalcolithic, characterized by cylindrical corrugated cups, Full Chalcolithic by so-called acacia-leaf decoration, and Late Chalcolithic by Bell Beaker pottery. The aim of this research is to determine if Chalcolithic ceramic raw materials and production techniques have remained the same over time and whether the pottery is locally produced. Regarding the Lisbon region, 149 ceramic samples from four Chalcolithic settlements (Vila Nova de São Pedro, Penedo do Lexim, Espargueira and Baútas) were evaluated concerning textural, chemical and mineralogical compositions. Textural analysis was performed using optical microscopy, chemical characterization was achieved using micro-energy dispersive X-ray fluorescence spectrometry and mineralogical characterization was undertaken using X-ray powder diffraction and petrographic microscopy as main techniques. Results suggest that production techniques may have remained similar throughout all the Chalcolithic period, with firing temperatures between 700 and 800 °C. Multivariate analysis of results from chemical and mineralogical analyses suggests that multiple sources of raw materials must have been used in the manufacture of the pottery collected at the four Chalcolithic settlements.

Bluish-grey limestones have been extensively used as ornamental stones for decoration purposes in buildings, as well as in works of art, and accordingly, have been the target of intense exploration. In Portugal, the Jurassic limestone massif known as the Maciço Calcário Estremenho (MCE), has been the source of grey-coloured ornamental stones, namely the Azul Valverde (one of the most well-known bluish-grey limestones) and Atlantic Blue varieties, both of which may undergo colour changes in outdoor environments. In this sense, it is important to understand the sudden colour change from bluish-grey to yellow/beige in the same limestone block in a quarry, or even, what happens to the colour when polished limestone is placed outdoors. This study was undertaken using various techniques, namely XRF (X-ray fluorescence spectrometry), XRD (X-ray diffraction), SEM (scanning electron microscopy), DTA–TG (differential thermal analysis/thermogravimetry) and colourimetry. Synchrotron radiation was also used at the European Synchrotron Radiation Facility (ESRF, Grenoble, France) where XANES (X-ray Absorption Near Edge Structure) spectra at Fe K-edge were collected to ascertain the speciation state of Fe in different coloured zones of the limestone, previously checked by EDXRF (energy dispersive X-ray fluorescence). The presence of Fe2+ and Fe3+ are responsible for the greyish and yellow/brown colour, respectively. On the other hand, the UV radiation from the sun causes a quickened and severe bleaching/fading on the dark blue/grey polished limestone.

The inexorable increase of energy demand and the efficiency bottleneck of monocrystalline silicon solar cell technology is promoting the research and development of alternative photovoltaic materials. Copper-arsenic-sulfide (CAS) compounds are still rather unexplored in the literature, yet they have been regarded as promising candidates for use as p-type absorber in solar cells, owing to their broad raw material availability, suitable bandgap and high absorption coefficient. Here, a comprehensive study is presented on the structural and optoelectronic properties of CAS thin-films deposited via radio-frequency magnetron co-sputtering, using a commercial Cu target together with a Cu-As-S target with material obtained from local resources, specifically from mines in the Portuguese region of the Iberian Pyrite Belt. Raman and X-ray diffraction analysis confirm that the use of two targets results in films with pronounced stoichiometry gradients, suggesting a transition from amorphous CAS compounds to crystalline djurleite (Cu31S16), with the increasing proximity to the Cu target. Resistivity values from 4.7 mΩ·cm to 17.4 Ω·cm are obtained, being the lowest resistive films, those with pronounced sub-bandgap free-carrier absorption. The bandgap values range from 2.20 to 2.65 eV, indicating promising application as wide-bandgap semiconductors in third-generation (e.g., multi-junction) photovoltaic devices.

Debonding failures of FRP have been frequently observed in laboratory tests of reinforced concrete (RC) beams flexurally-strengthened with near-surface mounted (NSM) fibre-reinforced polymer (FRP). A number of numerical and theoretical studies have been carried out to predict debonding failures in NSM FRP-strengthened beams, and several strength models have also been proposed. The existing studies, however, were all based on the scenario of a simply supported beam tested under one or two-point loading, while the influence of load distribution has not yet been investigated. This paper presents the first ever study into the effect of load distribution on the behaviour of NSM FRP-strengthened RC beams. A series of large-scale RC beams flexurally-strengthened with NSM FRP strips were first tested under different load uniformities; then a finite element (FE) model, which can give close predictions to the behaviour of such strengthened beams, was developed; finally, the proposed FE model was utilized to investigate the influence of bond length of NSM FRP on the load uniformity effect. It was found that the load uniformity has a significant effect on the beam behaviour, and the degree of this effect varies with the bond length of NSM FRP. © 2021 Elsevier Ltd

This paper presents an experimental study about the fire behaviour of reinforced concrete (RC) slabs strengthened with carbon fibre reinforced polymer (CFRP) strips, applied according to three different techniques: externally bonded reinforcement (EBR); near-surface mounted (NSM), and continuous reinforcement embedded at the ends (CREatE), a new technique that prevents premature CFRP debonding. The main goals of this study were three-fold: to understand and compare the fire behaviour of the strengthening techniques, namely the CREatE technique (yet to be studied); to assess the efficiency of the fire protection schemes (constant thickness vs. increased thickness at the CFRP anchorage zones) in extending the fire resistance of the CFRP systems; and, based on the experimental results and data available in the literature, to propose “critical” temperatures for the fire design of CFRP-strengthened RC members. The results obtained show that: (i) without protection, the CREatE technique presented higher fire resistance than the alternative NSM and EBR techniques (24 min vs. 16 min and 2 min); (ii) with fire protection, regardless of its geometry, the NSM and CREatE techniques presented a similar fire resistance (both above 120 min), higher than the EBR technique (less than 60 min); and (iii) the “critical” temperatures for each technique were defined as 1.0Tg, 2.5Tg and 3.0Tg for EBR, NSM and CREatE, respectively, with Tg being the glass transition temperature of the adhesive, defined based on the onset of the storage modulus curve decay from dynamic mechanical analysis. © 2021 Elsevier Ltd