Teresa Avilés

n/a

{A new rigid bidentate ligand, bis(1-naphthylimino)acenaphthene, L1, and its Zn(II) and Pd(II) complexes {[}ZnCl(2)(L1)], 1, and {[}PdCl(2)(L1)], 2, were synthesized. L1 was prepared by the ``template method{''}, reacting 1-naphthyl amine and acenaphthenequinone in the presence of ZnCl(2), giving 1, which was further demetallated. Reaction of 1-naphthyl amine with acenaphthenequinone and PdCl(2) afforded dichloride bis(1-naphthyl)acenaphthenequinonediimine palladium, 2. L1, 1, and 2 were obtained as a mixture of syn and anti isomers. Compound 2 was also obtained by the reaction of PdCl(2) activated by refluxing it in acetonitrile followed by the addition of L1; by this route also a mixture of syn and anti isomers was obtained, but at a different rate. The solid-state structures of L1 and the anti isomer of compound 2 have been determined by single-crystal X-ray diffraction. All compounds have been characterized by elemental analyses; matrix-assisted laser desorption ionization-time-of-flight-mass spectrometry; IR; UV-vis; (1)H, (13)C, and (1)H-(1)H correlation spectroscopy; (1)H-(13)C heteronuclear single quantum coherence; (1)H-(13)C heteronuclear single quantum coherence-total correlation spectroscopy; and (1)H-(1)H nuclear Overhauser effect spectrometry NMR spectroscopies when applied. Density functional theory studies showed that both conformers for {[}PdCl(2)(BIAN)] are isoenergetic, and they can both be obtained experimentally. However, we can predict that the isomerization process is not available in a square-planar complex, but it is possible for the free ligand. The molecular geometry is very similar in both isomers, and only different orientations for naphthyl groups can be expected.}

{{A series of new cationic and neutral (Ar-BIAN) copper(I) complexes {[}in which Ar-BIAN = bis(aryl)acenaphthenequinonediimine] was synthesised and characterised by elemental analysis, 1D and 2D NMR spectroscopy and single-crystal Xray diffraction. The cationic complexes of the general formula {[}Cu(Ar-BIAN)L-2]BF4 {[}L-2 = (PPh3)(2) (1), dppe (2), dppf (3), (AsPh3)(2) (4); Ar = 4-iPrC(6)H(4) (a), 4-MeOC6H4 (b), 4-NO2C6H4 (c), 2-iPrC(6)H(4) (d), Ph2PCH2CH2PPh2 (dppe), (Ph2PC5H4)(2)Fe (dppf)] were synthesised by reaction of {[}Cu(EPh3)(4)]BF4 (E = P or As) and equimolar amounts of Ar-BIAN ligands, or by reaction of equimolar amounts of {[}Cu(NCMe)(4)]BF4, 4-iPrC(6)H(4)-BIAN (a) and diphosphanes dppe or dppf, in dichloromethane, whereas the neutral complexes of the types {[}CuX(Ar-BIAN)(EPh3)] {[}X = Cl

{Four novel Zinc-NHC alkyl/alkoxide/chloride complexes (4, 5, 9 and 9) were readily prepared and fully characterized, including X-ray diffraction crystallography for 5 and 9. The reaction of N-methyl-N-butyl imidazolium chloride (3.HCl) with ZnEt2 (2 equiv.) afforded the corresponding {[}(CNHC)ZnCl(Et)] complex (4) via a protonolysis reaction, as deduced from NMR data. The alcoholysis of 4 with BnOH led to quantitative formation of the dinuclear Zn(II) alkoxide species {[}(CNHC)ZnCl(OBn)]2 (5), as confirmed by X-ray diffraction analysis. The NMR data are in agreement with species 5 retaining its dimeric structure in solution at room temperature. The protonolysis reaction of N-(2,6-diisopropylphenyl)-N-ethyl methyl ether imidazolium chloride (8.HCl) with ZnEt2 (2 equiv.) yielded the {[}(CNHC)ZnCl(Et)] species 9. The latter was found to be reactive with CH2Cl2 in solution and to cleanly convert to the corresponding Zn(II) dichloride {[}(CNHC)ZnCl2]2 (9), whose molecular structure was also elucidated using X-ray diffractometry. Unlike Zn(II)-NHC alkoxide species 1 and 2, which contain a NHC flanked with an additional N-functional group (i.e. thioether and ether, respectively), the Zn(II) alkoxide species 5 incorporates a monodentate NHC ligand. The Zn(II) complexes 1, 2 and 5 were tested in the ring-opening polymerization (ROP) of trimethylene carbonate (TMC). All three species are effective initiators for the controlled ROP of trimethylene carbonate, resulting in the production of narrow disperse PTMC material. Initiator 1 (incorporating a thioether moiety) was found to perform best in the ROP of TMC. Notably, the latter also readily undergoes the sequential ROP of TMC and rac-LA in the presence of a chain-transfer agent, leading to well-defined and high-molecular-weight PTMC/PLA block copolymers. Copyright (c) 2014 John Wiley & Sons, Ltd.}

{Two new Ar-BIAN Cu(II) complexes (where Ar-BIAN = bis(aryl-imino)acenaphthene) of formulations {[}CuCl2(Mes-BIAN)] (1) (Mes = 2,4,6-Me3C6H2) and {[}CuCl2(Dipp-BIAN)] (2) (Dipp = 2,6-iPr(2)C(6)H(3)) were synthesised by direct reaction of CuCl2 suspended in dichloromethane with the respective ligands Mes-BIAN (L1) and Dipp-BIAN (L2), dissolved in dichloromethane, under an argon atmosphere. Attempts to obtain these compounds by solubilising CuCl2 in methanol and adding a dichloromethane solution of the corresponding ligand, under aerobic conditions, gave also compound 1, but, in the case of L2, the Cu(I) dimer {[}CuCl(Dipp-BIAN)](2) (3) was obtained instead of compound 2. The compounds were fully characterised by elemental analyses, MALDI-TOF mass spectrometry, FT-IR, H-1 NMR and EPR spectroscopic techniques. The solid-state molecular structures of compounds 1-3 were determined by single crystal X-ray diffraction, showing the expected chelation of the Ar-BIAN ligands and two chloride ligands completing the coordination sphere of the Cu(11) centre. In the case of the complex 1, an intermediate coordination geometry around the Cu(II) centre, between square planar and tetrahedral, was revealed, while the complex 2 showed an almost square planar geometry. The structural differences and evaluation of energetic changes were rationalised by DFT calculations. Analysis of the electrochemical behaviour of complexes 1-3 was performed by cyclic voltammetry and the experimental redox potentials for Cu(II)/Cu(I) pairs have been compared with theoretical values calculated by DFT in the gas phase and in dichloromethane and methanol solutions. The complex 1 exhibited good activity in the reverse atom transfer radical polymerisation (ATRP) of styrene.}

{The present contribution comprehensively reviews the synthesis, structural characterization and current applications of group 13 metal complexes supported by heteroatom-bonded carbene ligands. Detailed structural analysis and comparison of the structure/reactivity trends of group 13 metal carbene species constitute the primary purpose of the present contribution. The current use and applications of this class of compounds are also discussed. In general, such adducts have been thoroughly characterized (both in solution or in the solid state) and structural data, frequently supported by theoretical investigations, provided insight into the stability/reactivity of the adducts formed. While essentially dominated by Arduengo-type NHC adducts, N- and P-bonded cyclic and acyclic carbene complexes of Al, Ga and In have also been recently described, including the recent use of ``carbon(0) ligands{''}. In general, recent developments in carbene group 13 species exploit the improved stability of the resulting metal complexes for either the isolation/characterization of unprecedented structural motifs or the production of robust group 13 metal reagents subsequently used for organic substrates functionalization or in catalysis. (C) 2014 Elsevier B.V. All rights reserved.}

{Zinc alkyl cations supported by N,N-BIAN-type bidentate ligands were found to be highly active in the immortal ROP of epsilon-caprolactone to yield narrowly disperse and chain length-controlled poly(epsilon-caprolactone), whether in solution or bulk polymerization conditions.}

{New cationic Ag(I) complexes were prepared by reaction of AgBF4 with two thioether-functionalized bis-(diphenylphosphino) amine ligands, Ph2PN(p-ArSMe)PPh2 (L1) and Ph2PN(n-PrSMe)PPh2 (L2), and compared with those obtained from the unfunctionalized ligands Ph2PN(Ph)PPh2 (L3) and Ph2PN(n-Bu)PPh2 (L4), respectively. The complex {[}Ag-3(mu(3)-Cl)(2)(mu(2)-L1-P, P)(3)](BF4) (1 center dot BF4) contains a triangular array of Ag centres supported by three bridging L1 ligands and two triply-bridging chlorides. In contrast, ligand L2 led to the coordination polymer {[}\{Ag-2(mu(3)-L2,-P,P,S)(2)(MeCN)(2)\}\{Ag-2(mu(2)-L2-P,P)(2)(MeCN)(2) \}(BF4)(4)](n) (2) in which the tethered thioether group connects intermolecularly a Ag2 unit to the diphosphine bridging the other Ag2 unit. With L3 and L4, two similar complexes were obtained, {[}Ag-2(mu(2)-L3)(BF4)(2)] (3) and {[}Ag-2(mu(2)-L4)(BF4)(2)] (4), respectively, with bridging diphosphine ligands and a BF4 anion completing the coordination sphere of the metal. Complexes 1 center dot BF4 center dot CH2Cl2, 2 center dot THF, 3 center dot 3CH(2)Cl(2) and 4 have been fully characterized, including by single crystal X-ray diffraction.}

{{Abstract A variety of N-heterocyclic carbene (NHC) zinc adducts of the type NHC-ZnMe2 {[}2a

{Three new emissive 8-aminoquinoline derived probes (1)-(3) and one dinuclear Zn(II) complex (4) were synthesized and fully characterized. Their absorption spectra show maxima at 310-336 nm, and fluorescence emission between 456 and 498 nm. Compound (1) was characterized by single crystal X-ray diffraction. The effect upon Zn(II) and Cu(II) coordination to compounds (1)-(3) was studied by monitoring the changes in absorption and fluorescence spectra, and complemented by calculation of metal-ligand stability constants. The results indicate that compound (3) is the one that presents the most favorable geometry for coordinating two metal cations, fact that is confirmed by the synthesis of the dinuclear complex (4), with similar molecular geometry. (C) 2011 Elsevier B.V. All rights reserved.}