Teresa Avilés

{Two synthetic strategies of tetrathiomolybdate-metal clusters with the potential to be used as NMR structural probes for the location of the metal cofactor in the orange protein (ORP) are described. The first strategy is based on the substitution reaction in which small organic ligands bind directly to the metal centre in a molybdenumcopper hetero-dinuclear cluster. Interaction between {[}PPh4]2{[}MoS4CuCl] and either aliphatic {[}beta-mercaptoethanol (b-me)] or aromatic {[}o-aminobenzenethiol (abt)] thiols in the presence of a strong base resulted in the formation of {[}Ph4P]2{[}S2MoS2Cu(b-me)] (1a) and {[}Et4N]2{[}S2MoS2Cu(abt)]center dot H2O center dot 0.25DMF (1b), which can be used to obtain intermolecular NOEs. The compound 1a readily hydrolyzed to {[}Ph4P]2{[}OSMoS2Cu(b-me)] (1ahydro) in contact with a protic solvent. The second strategy consisted of the incorporation of cadmium into tetrathiomolybdate ({[}MoS4]2), which gives rise to the trinuclear cluster compound {[}PPh4]2{[}(MoS4)2Cd] (2). All clusters were characterized spectroscopically and their structure determined by X-ray diffraction. The NMR spectroscopic data are consistent with the formation of a complex with a 1:1 ratio of \{MoS4Cu\} and thiol. The 113Cd NMR chemical shift of compound 2 is consistent with the cadmium having a tetrahedral geometry and coordinated by four sulfur ligands. The tetraphenylphosphonium cation in compound 1a was replaced by a tetramethylammonium countercation originating in the water-soluble compound {[}Me4N-1a]. Solubility in aqueous buffers is a requirement for incorporating this cluster into apo-ORP. These compounds will be used to identify the exact location of the ORP heterometallic cluster using NMR methodologies.}

{Three fluorinated Mo-Cu-thiolate isomers,{[}Ph4Ph{[}S2MoS2Cu(n-SPhF)], {[}n-SPhF = 2-fluorothiophenol (la)], 3-fluorothiophenol (lb), and 4-fluorothiophenol (1c)] were synthesized and spectroscopically characterized. The F-19-NMR signal of the fluorine atom in the.benzene has different chemical shift for each isomer, which is highly influenced by the local environment that can be manipulated by different solvents and solutes. The fluorine-19 chemical shift is an advantageous NMR structural probe in alternative to H-1-NMR {[}B.K. Maiti, T. Aviles, M. Matzapetakis, I. Moura, S.R. Pauleta, JJ.G. Moura, Eur. J. Inorg. Chem. (2012) 4159.], that can be used to provide local information on the pocket of the metal cluster in the Orange Protein (ORP). (C) 2014 Elsevier B.V. All rights reserved.}

{The P, O-type phosphinophenol proligands (1 center dot H, 2-PPh2-4-Me-6-Me-C6H2OH; 2 center dot H, 2-PPh2-4-Me-6-Bu-t-C6H2OH) readily react with one equiv. of ZnEt2 to afford in high yields the corresponding Zn(II)ethyl dimers of the type {[}(kappa(2)-P, O) Zn-Et](2) (3 and 4) with two mu-O-Ph bridging oxygens connecting the two Zn(II) centers, as determined by X-ray diffraction (XRD) studies in the case of 3. Based on diffusion-ordered NMR spectroscopy (DOSY), both species 3 and 4 retain their dimeric structures in solution. The alcoholysis reaction of Zn(II) alkyls 3 and 4 with BnOH led to the high yield formation of the corresponding Zn(II) benzyloxide species {[}(kappa(2)-P, O) Zn-OBn](2) (5 and 6), isolated in a pure form as colorless solids. The centrosymmetric and dimeric nature of Zn(II) alkoxides 5 and 6 in solution was deduced from DOSY NMR experiments and multinuclear NMR data. Though the heteroleptic species 5 is stable in solution, its analogue 6 is instable in CH2Cl2 solution at room temperature to slowly decompose to the corresponding homoleptic species 8 via the transient formation of (kappa(2)-P, O)(2)Zn-2(mu-OBn)(mu-kappa(1):kappa(1)-P, O) (6'). Crystallization of compound 6 led to crystals of 6', as established by XRD analysis. The reaction of ZnEt2 with two equiv. of 1 center dot H and 2 center dot H allowed access to the corresponding homoleptic species of the type {[}Zn(P, O)(2)] (7 and 8). All gathered data are consistent with compound 7 being a dinuclear species in the solid state and in solution. Data for species 8, which bears a sterically demanding P, O-ligand, are consistent with a mononuclear species in solution. The Zn(II) alkoxide species 5 and the {[}Zn(P, O)(2)]-type compounds 7 and 8 were evaluated as initiators of the ring-opening polymerization (ROP) of lactide (LA), epsilon-caprolactone (epsilon-CL) and trimethylene carbonate (TMC). Species 5 is a well-behaved ROP initiator for the homo-, co- and terpolymerization of all three monomers with the production of narrow disperse materials under living and immortal conditions. Though species 7 and 8 are ROP inactive on their own, they readily polymerize LA in the presence of a nucleophile such as BnOH to produce narrow disperse PLA, presumably via an activated-monomer ROP mechanism.}

{The complex {[}Ph4P](2){[}Cu(bdt)(2)] (1(red)) was synthesized by the reaction of {[}Ph4P]2{[}S2MoS2CuCl] with H2bdt (bdt = benzene-1,2-dithiolate) in basic medium. 1(red) is highly susceptible toward dioxygen, affording the one electron oxidized diamagnetic compound {[}Ph4P]{[}Cu(bdt)(2)] (1(ox)). The interconversion between these two oxidation states can be switched by addition of O-2 or base (Et4NOH = tetraethylammonium hydroxide), as demonstrated by cyclic voltammetry and UV-visible and EPR spectroscopies. Thiomolybdates, in free or complex forms with copper ions, play an important role in the stability of 1(red) during its synthesis, since in its absence, 1(ox) is isolated. Both 1(red) and 1(ox) were structurally characterized by X-ray crystallography. EPR experiments showed that 1(red) is a Cu(II)-sulfur complex and revealed strong covalency on the copper-sulfur bonds. DFT calculations confirmed the spin density delocalization over the four sulfur atoms (76%) and copper (24%) atom, suggesting that 1(red) has a ``thiyl radical character{''}. Time dependent DFT calculations identified such ligand to ligand charge transfer transitions. Accordingly, 1(red) is better described by the two isoelectronic structures {[}Cu(I)(bdt(2), 4S(3-{*}))](2-) {[}Cu-II(bdt(2), 4S(4-))](2-). On thermodynamic grounds, oxidation of 1(red) (doublet state) leads to 1(ox) singlet state, {[}Cu-III(bd(t)2, 4S(4-))](1-).}

{Four novel Zinc-NHC alkyl/alkoxide/chloride complexes (4, 5, 9 and 9) were readily prepared and fully characterized, including X-ray diffraction crystallography for 5 and 9. The reaction of N-methyl-N-butyl imidazolium chloride (3.HCl) with ZnEt2 (2 equiv.) afforded the corresponding {[}(CNHC)ZnCl(Et)] complex (4) via a protonolysis reaction, as deduced from NMR data. The alcoholysis of 4 with BnOH led to quantitative formation of the dinuclear Zn(II) alkoxide species {[}(CNHC)ZnCl(OBn)]2 (5), as confirmed by X-ray diffraction analysis. The NMR data are in agreement with species 5 retaining its dimeric structure in solution at room temperature. The protonolysis reaction of N-(2,6-diisopropylphenyl)-N-ethyl methyl ether imidazolium chloride (8.HCl) with ZnEt2 (2 equiv.) yielded the {[}(CNHC)ZnCl(Et)] species 9. The latter was found to be reactive with CH2Cl2 in solution and to cleanly convert to the corresponding Zn(II) dichloride {[}(CNHC)ZnCl2]2 (9), whose molecular structure was also elucidated using X-ray diffractometry. Unlike Zn(II)-NHC alkoxide species 1 and 2, which contain a NHC flanked with an additional N-functional group (i.e. thioether and ether, respectively), the Zn(II) alkoxide species 5 incorporates a monodentate NHC ligand. The Zn(II) complexes 1, 2 and 5 were tested in the ring-opening polymerization (ROP) of trimethylene carbonate (TMC). All three species are effective initiators for the controlled ROP of trimethylene carbonate, resulting in the production of narrow disperse PTMC material. Initiator 1 (incorporating a thioether moiety) was found to perform best in the ROP of TMC. Notably, the latter also readily undergoes the sequential ROP of TMC and rac-LA in the presence of a chain-transfer agent, leading to well-defined and high-molecular-weight PTMC/PLA block copolymers. Copyright (c) 2014 John Wiley & Sons, Ltd.}

{Reaction of {[}Co(eta(5)-C5H5)(CO)(2)], 1, with 1,1'-bis(diphenylphosphino)ferrocene (dppf) yields the new trinuclear complex {[}Co(eta(5)-C5H5)(CO)](2)(mu-dppf), 2, which was structurally characterised by single crystal X-ray diffraction and showed two Co(eta(5)-C5H5)(CO) moieties covalently linked by a dppf bridge. Electrochemical studies in dichloromethane revealed that both Co(I) and Fe(II) in the precursors were oxidized to Co(II)/Co(III) and Fe(III), respectively. On the other hand, in 2 the two first oxidation waves were assigned to Co, the Fe(II) centre requiring a higher potential than in free dppf. DFT calculations showed that the HOMOs of 2 were localised in the Co fragments, owing to the destabilisation of the Co(eta(5)-C5H5)(CO) orbitals after binding dppf. (C) 2012 Elsevier B.V. All rights reserved.}

The SiMe3 group (TMS), introduced as a substituent at the cyclopentadienyl ligand, is found to magnify the solubility of the corresponding metal complexes in supercritical carbon dioxide (scCO(2)). This is verified from comparative solubility measurements of the species (eta(5)-Me-3 SiC5H4)MoO2 Cl, 1a, (eta(5)-Me3SiC5H4)(2)ZrCl2, 2a, and (eta(5)-Me3SiC5H4)Co(CO)I-2.0.5(I-2), 3a (newly synthesised), and of their unsubstituted precursors 1b-3b, respectively. In spite of the increased solubility, the chemical, structural and reactivity properties of the TMS derivatives are scarcely affected. Confirmation comes from a detailed study of the cobalt complex 3a that includes X-ray structural determination. The geometry is most similar to that of the precursor 3b while an apparently different Co-CO interaction is observed in the carboxylated analogue [(eta(5)-PhCH2CO2C5H4)Co(CO) I-2, 3c]. The problem is computationally tackled by using the DFT B3LYP method. The optimised geometries of the simplified models of 3a-3c are all very similar. In particular, the computed stretching frequency of the unique CO ligand is consistent with the insignificant influence of the TMS group while it suggests a reduced amount of metal back-donation in 3c. It is inferred that the TMS complexes 1a-3a, while having higher solubility in scCO2, maintain almost unaltered the electronic and chemical features of their parent compounds. In particular, the role of 1a-3a as catalysts, that is well documented for homogeneous solutions, remains unaltered in the very different scCO(2) environment. The assumption is experimentally validated for 1a by performing with the latter two classic catalytic processes. The first process is the oxidation of PPh3 that is achieved by using molecular oxygen as an oxidant. The second example concerns the epoxidation of cyclohexene achieved in presence of tert-butyl hydroperoxide (TBHP).

The reactivity of arylisocyanates in supercritical carbon dioxide (scCO(2)) was studied using the easily available complexes CpCo(CO)(2), CpCoPPh3Me2 and Ni(cod)(2) as catalysts. A study of the solubility of the catalysts in scCO(2) was undertaken in all cases. The complex CpCo(CO)(2) is very soluble, 1.7 x 10(-1) mol kg(-1), while CpCoPPh3Me2 has a lower solubility, 7.2 x 10(-3) mol kg(-1), and Ni(cod)(2) is insoluble in scCO(2). For comparison purposes, the reactions were performed in parallel in scCO(2), using toluene as a solvent and just with the neat liquid arylisocyanate. Reactions in scCO(2) either do not take place at all, when CpCo(CO), is used as catalyst, or occur with low yields affording the trimer of the corresponding arylisocyanate when CpCoPPh3Me2 or Ni(cod)(2) act as catalysts. No incorporation of CO2 into the organic substrate was observed. Better conversions to triarylisocyanate were obtained when the reactions were performed by direct mixture of the liquid arylisocyanate ArNCO (Ar = Ph, p-CH3C6H4, p-CH3OC6H4) and the catalyst. Using toluene as a solvent, the yields of the trimers were lower than those obtained in neat arylisocyanate, and in some cases they were not formed at all. For instance in the reaction of CpCo(CO), and tolylisocyanate either under stoichiometric or catalytic conditions the trimer is not obtained, instead the compound H2R3N3C2O2 (R = CH3C6H4), was isolated in low yield. In the reaction of Ni(cod)(2)/PPh3 with phenylisocyanate, the trimer was formed but in low yield. The lower yields of the trimers observed when the reactions were performed in scCO(2) or in toluene, compared to that observed in neat arylisocyanates, indicates that the decrease in reactivity is due to a decrease in concentration. (C) 2001 Elsevier Science B.V. All rights reserved.

The phase behaviour of the binary mixture of carbon dioxide and the cobalt complex dicarbonyl(eta(5)-cyclopentadienyl)-cobalt, CPCo(CO)(2), has been investigated. This organometallic compound is one of the most effective catalysts of cyclotrimerization reactions of arylisocyanates and alkynes. Vapour-liquid equilibrium (VLE) measurements were undertaken in a static analytical apparatus at 313.15, 323.15 and 363.15 K at pressures up to 15 MPa. p, T isopleths were measured by a synthetic method in a Cailletet apparatus. Nine different compositions ranging from 17.56 to 94.23 mol% of CO2 were measured up to 15 MPa. Modelling with the Peng-Robinson equation of state (PR EOS) gave reasonable results in the correlation of the experimental phase equilibrium compositions using two temperature-dependent interaction parameters. (C) 2003 Elsevier B.V. All rights reserved.