Manuel J. Mendes Website

One of the most promising approaches to produce industrial-compatible Transparent Conducting Materials (TCMs) with excellent characteristics is the fabrication of TCO/metal/TCO multilayers. In this article, we report on the electro-optical properties of a novel high-performing TCO/metal/TCO structure in which the intra-layer is a micro-structured metallic grid instead of a continuous thin film. The grid is obtained by evaporation of Ag through a mask of polystyrene colloidal micro-spheres deposited by the Langmuir-Blodgett method and partially dry-etched in plasma. IZO/Ag grid/IZO structures with different thicknesses and mesh dimensions have been fabricated, exhibiting excellent electrical characteristics (sheet resistance below 10 $Ømega$/□) and particularly high optical transmittance in the near-infrared spectral region as compared to planar (unstructured) TCM multilayers. Numerical simulations were also used to highlight the role of the Ag mesh parameters on the electrical properties.

A semiclassical method is developed to calculate the energy absorption of an electronic system located in the near field of a metal nanoparticle sustaining surface plasmons. The results are found to be similar to those of photon absorption from ordinary transversal radiation. However, they are affected by a geometrical factor that can increase the absorption by several orders of magnitude. As example, we investigate ellipsoidal-shaped metal nanoparticles which, under favorable conditions, may provide near field aborption enhancements almost as large as 10(4), and in many cases above 10. (C) 2008 American Institute of Physics. [DOI: 10.1063/1.3014035]

In order to enhance infrared light absorption in sub-bandgap transitions in an intermediate band solar cell, the scattered near-field potential from uncoated and coated metallic nanoparticles with a spheroidal shape is calculated with the electrostatic model. The absorption enhancement produced at the surface plasmon frequency of the nanoparticles can be of several orders of magnitude in some cases.

A colloidal deposition technique is presented to construct long-range ordered hybrid arrays of self-assembled quantum dots and metal nanoparticles. Quantum dots are promising for novel opto-electronic devices but, in most cases, their optical transitions of interest lack sufficient light absorption to provide a significant impact in their implementation. A potential solution is to couple the dots with localized plasmons in metal nanoparticles. The extreme confinement of light in the near-field produced by the nanoparticles can potentially boost the absorption in the quantum dots by up to two orders of magnitude. In this work, light extinction measurements are employed to probe the plasmon resonance of spherical gold nanoparticles in lead sulfide colloidal quantum dots and amorphous silicon thin-films. Mie theory computations are used to analyze the experimental results and determine the absorption enhancement that can be generated by the highly intense near-field produced in the vicinity of the gold nanoparticles at their surface plasmon resonance. The results presented here are of interest for the development of plasmon-enhanced colloidal nanostructured photovoltaic materials, such as colloidal quantum dot intermediate-band solar cells.

Abstract.  The concept of intermediate band solar cell (IBSC) is, apparently, simple to grasp. However, since the idea was proposed, our understanding has improved and some concepts can now be explained more clearly than when the concept was initially introduced. Clarifying these concepts is important, even if they are well known for the advanced researcher, so that research efforts can be driven in the right direction from the start. The six pieces of this work are: Does a miniband need to be formed when the IBSC is implemented with quantum dots? What are the problems for each of the main practical approaches that exist today? What are the simplest experimental techniques to demonstrate whether an IBSC is working as such or not? What is the issue with the absorption coefficient overlap and the Mott's transition? What would the best system be, if any?

The application of diffraction gratings to solar cells is a promising approach to superseding the light trapping limits of conventional Lambertian structures. In this paper a mathematical formalism is derived for calculating the absorption that can be expected in a solar cell equipped with a diffraction grating, which can be applied to any lattice geometry and grating profile. Furthermore, the formalism is used to calculate the upper limit of total absorption that can theoretically be achieved using a diffraction grating. The derived formalism and limits are valid when the solar cell thickness is greater than the coherence length of the illuminating solar spectrum. Comparison is made to the upper limit achievable using an angularly selective Rugate filter, which is also calculated. Both limits are found to be considerably higher than the Lambertian limit within the range of sunlight concentration factors practically employed in photovoltaic systems (1–1000×). The upper limit of absorption using the diffraction grating is shown to be equal to the thermodynamic limit for all absorbances and concentration factors. The limit for the Rugate filter is generally lower, but tends to the thermodynamic limit for lower cell absorbances. Copyright © 2011 John Wiley {&} Sons, Ltd.