Armando Nunes Antão

A strict upper-bound limit analysis finite element formulation is used to estimate shape factors s_gamma and s_q for determining the bearing capacity of shallow foundations using the classic bearing capacity formula. The finite element formulation uses a quadratic approximation for the velocity field, an extension of a previously published Augmented Lagrangian formulation with a linear velocity field, and was implemented for a parallel processing environment. Results from determining the limit loads under three-dimensional conditions are presented and compared with previously published data. The results obtained allow a strict upper-bound determination of the shape factors. Furthermore, a practical proposal for these factors is made and compared with other proposals made by other authors.

This paper addresses an implementation of the upper bound limit analysis theorem using a parallel mixed finite element formulation. The intrinsic characteristics of the adopted upper bound formulation proved to be suitable to adapt it to an efficient parallelization scheme. In order to illustrate the computational power provided by the new parallel processing method, accurate upper bound collapse load estimates, for 3D problems, are produced using a cluster of common PC machines.

A three-dimensional (3D) numerical implementation of the limit analysis upper-bound theorem is used to determine passive horizontal earth-pressure coefficients. An extension technique allowing determination of the 3D passive earth pressures for any width-to-height ratios greater than 7 is presented. The horizontal passive earth-pressure coefficients are presented and compared with solutions published previously. Results of the ratio between the 3D and two-dimensional horizontal passive earth-pressure coefficients are shown and found to be almost independent of the soil-to-wall friction ratio. A simple equation is proposed for calculating this passive earth-pressure ratio.

This paper describes a novel upper-bound formulation of limit analysis. This formulation is an innovative variant of an existing two-field mixed formulation based on the augmented Lagrangian method also developed by the authors. A natural approach is used to describe the deformation of each finite element. Furthermore, and in contrast to the previous formulation, two independent field approximations are now both used to define the velocity field, defined globally and at element level. It is shown that this feature allows a governing system of uncoupled linear equations to be obtained. Some numerical examples in plane strain conditions are presented in order to illustrate the current model performance. In conclusion, the potential and advantages of this new approach are discussed.

n/a

This paper presents a finite element model based on mathematical non-linear programming in order to determine upper bounds of colapse loads of a mechanical structure.The proposed formulation is derived within a kinematical approach framework, employing two simultaneous and independent field approximations for the velocity and strain rate fields. The augmented Lagrangian is used to establish the compatibility between these two fields. In this model, only continuous velocity fields are used.Uzawa's minimization algorithm is applied to determine the optimal kinematical field that minimizes the difference between external and dissipated work rate. The use of this technique allows to bypass the complexity of the non-linear aspects of the problem, since non-linearity is addressed as a set of small local subproblems of optimization for each finite element.The obtained model is quite versatile and suitable for solving a wide range of collapse problems. This paper studies 3D strut-and-tie structures, 2D plane strain/stress and 3D solid problems.