António Moniz

Industrial rationalization represents a decisive moment of the strategic development of business activities in the last few years. In this sense, it is also a theoretical challenge to Industrial Sociology, since the dimensions, both technical and social, of that rationalization can be underlined. The analysis of the better-known different patterns of rationalization allows us a further knowledge of the main strategies for industrial modernization. Accordingly, this paper presents some results deriving from the application of those strategies. Finally, this paper gives a particular attention to the more recent tendencies of development of integrated systems of production, particularly of those focusing upon the social and organizational aspects of industrial rationalization.

At the beginning of the 21st century there are new expectations and challenges towards Technology Assessment (TA). Among these there is a new awareness on TA issues in education, in particular at universities. While TA was mainly an activity at extra-universitarian research institutions for a long time now there are new developments and initiative towards integrating TA issues in university courses. We will first give an insight into the international development. Secondly we will focus on the “TA and education” landscape in Germany and Portugal in more detail, followed by a description of new and emerging forms of cooperation between Portugal and Germany in this field which might serve as a model or an example for further cooperation between other partners.

In this paper we will address the impacts on work and employment in Portugal of undergoing reconfigurations in automotive Global Value Chains (GVC). Due to its contributions to employment, exports and production the automotive sector is regarded as strategic for Portugal. Currently, it is caught in the midst of a turmoil, spurred by major trends that are reshaping its global outlook, with perils and opportunities for firms and workers depending on their position in different segments of GVC. The emergence of GVC transformed the patterns of international division of labour, trade and investment. Countries and regions specialize not only in products and services but increasingly in tasks and functions. Value is created globally and is apportioned along the chain depending on the tasks performed, the resources and type of workforce engaged in production in each node, its geographical location and the relative power relations within the production network. Typically, along GVC’s production stages, labour intensive, low skill tasks are ascribed – offshored and subcontracted by lead firms – to firms and workers in peripheral countries, while knowledge intensive, more complex or higher skilled tasks are retained in core regions. The value captured, as well as the share of value ascribed to labour and the quality of employment, are broadly correlated with its position in the chain. GVC, besides firms or even sectors, thus become an appropriate locus for analysing labour processes and employment patterns.
Major trends reconfiguring automotive global networks of production, include: (i) automation; (ii) digitalisation; (iii) electrification of vehicles; (iv) shifting geographies of production; and (v) industrial, employment and social policies. Manufacture of vehicles is known to be an automation-intensive sector permeated by technological developments such as new cyber-physical systems and flexible lightweight robots with an impact on work and employment, particularly on low-skilled workers. National and regional industrial, trade and investment policies articulated with company strategies, are also participating in the reshaping of the automotive GVC and changing the geographies of production. Finally, employment and social policies impinge on and are conditioned by foreign investment and location decisions of automotive multinationals, thus participating in the reshaping of GVC. In order to respond to the main overarching research question (what are the actual and prospective impacts on work and employment in Portugal driven by transitions taking place in the automotive GVC?) an analytical model will be designed. It will place the ongoing and prospective transformations of work and employment patterns as consequence of the interplay of actor’s strategies and public policies, against the background of structures and institutions. The research study will be based on major OEM operating in Portugal (VW, Stellantis, Mitsubishi and Toyota) and on automotive supply chain companies, most of them major player on the automotive GVC (Faurecia, KWD, Vintech, Sodecia, Preh).

Currently distributed business process (re) design (resulting in components of business networks) basically relies on technical criteria. And that are the main purposes of most research projects supported by EC. Through the process of building a European Research Area, this means a strong influence in the national research programmes. However it is generally accepted that it should also take into account social criteria and aspects such as the quality of working life, or participation in decision processes. Those were some of the objectives of projects in de 80s decade, and framed some of the main concepts and scientific approaches to work organisation. The democratic participation of network and organisations members in the design process is a critical success factor. This is not accepted by everyone, but is based in sufficient case studies. Nevertheless, in order to achieve an optimization that can satisfying the requirements of agility of a network of enterprises, more complex design methods must be developed. Thus, the support to the collaborative design of distributed work in a network of enterprises, through a concurrent approaching business processes, work organisation and task content is a key factor to achieve such purposes. Increasing needs in terms of amounts of information, agility, and support for collaboration without time and space constrains, imposes the use of a computer-based model.

The objective of the paper is to help to understand recent changes in the structure of R&D activities, by analyzing data on the expenditure of the business sector in research and development (R&D). The results are framed in an international context, through comparison with indicators from the most developed countries, divided by technological intensity and economic activity. The study reveals that the indicators of Portuguese R&D expenditure in the business sector are closely linked both to fiscal policy and to high foreign direct investment in knowledge-intensive industries. It also links these indicators to phenomena such as the abundance of skilled labor in pharmaceutical industries and the government intervention in some sectors of the economy (namely health and rail transportation).

In recent years, statistical data revealed a strong dynamism in terms of Research and Development (R&D) growth, of development of innovation structures and emergence of programs, and a growth in terms of industrial integration. However, the political and financial changes from 2007 at the global level revealed as well how fragile are these
outcomes in terms of sustainable development strategy, and how far dependent are from the external markets and political structures. Based on the available information and data, we will present the changes observed in recent years, and understand how the industrial integration can be achieved with clear linkages to the national innovation system and the importance of R&D policy to structure the articulation between innovation and the economic market. The challenges and potential problems can be anticipated if the social implications are also present on the policy options, and if clear technology assessment procedures are taken. When this does not occur, the probability of endogenization of innovation and R&D will become problematic. For these reasons it can be difficult to talk
about a “success story” when all these elements are not considered as a whole and are only seen through very specific angles and with very specialized approaches.

In this working paper are present the main provisional results of the first round of a Delphi survey held in Portugal on the automotive sector. It was done under the WorTiS project, developed by IET – Research Centre on Enterprise and Work Innovation, and financed by the Portuguese Ministry of Science and Technology. The majority of experts consider to have an average of less knowledge in almost all the scenario topics presented. Nevertheless, we considered specially the topics where the experts considered themselves to have some knowledge. There were no “irrelevant” topics considered as such by the expert panel. There are also no topics that is not considered a need for co-operation (that happens in jus tone case). The lack of technological infra-structrures was not considered as an hindered factor for the accomplishement of any scenario. The experts panel considered no other international competence besides US, Japan or Germany in these topics. Although the members of the expert panel were not as many as needed, These situations will be taken into consideration for a second round of the Delphi survey

Energy storage systems (ESS) are seen as one of the main pillars for a renewable-based energy system. Selecting the most suitable and sustainable ESS for a given project is a problem that involves multiple stakeholders with quite often diverging objectives that cannot all be fulfilled by a single technology. Several studies are available that tackle this problem applying multi-criteria decision analysis (MCDA). However, these use very different Multi-Attribute Decision Making (MADM) approaches, criteria and goals for decision support, why their results are difficult to compare or to reproduce. This work presents a review of existing MCDA-literature using MADM as a tool for sustainability evaluation of grid-tied ESS. Available studies are summarized, the goals, used MADM methods, and quantification of criteria are analyzed and discussed to provide tentative recommendations. The reviewed studies cover multiple technologies ranging from electrochemical, mechanical or electric ESS. Considered criteria are mainly structured around technology, economy, society, and environment, comprising a high number of individual sub-criteria. The aggregation of these criteria is mainly realized through the Analytic Hierarchy Process (AHP) in combination with a wide set of other methods. The quantification of various criteria is often based on different literature sources wherein context-free data for cost, and environmental impacts are used, leading in some cases to inconsistent comparisons in the assessments. Only in a few cases, assessments are linked to specific application requirements, which are decisive factors for the design of an ESS. A minority of the reviewed works include a representative set of decision-makers in their approaches, wherein the number or type of participants is often not communicated transparently. Therefore, most of the studies are considered to have a limited orientation towards practical decision making, but they provide valuable information regarding MADM method development.

Approaching the topic of robotics-work relation in a general and international context enables the possibility to know more about the impacts in different sectors. In this book the main discussion themes are followed in order to understand which the main dimensions are included in such debate. In that way, it becomes possible to understand the possible answers and available alternatives.
The book follows the themes of relation between employment and technology, the automation as rationalization process and robotics as a technology reference. The other topics are the emergence of ethical, legal and social aspects of this technology, the development that can be perceived in the case of Portugal, and the conclusions about the limits and perspectives of new robotic developments.
This edition has empirical information on the Portuguese case and also includes data from the main resources of the global debate on this issue: the new developments of automation and its relation with the work content and employment.
The author underlined the importance of the contribute that he got from the discussions at the ITAS Working Group on Robotics Technology Assessment, and at the ITAS Research Group on Technology and Work, in Germany, and at the Observatory of Technology Assessment at CICS.NOVA in Portugal. The book is include in a series supported by the Portuguese-American Foundation for Development (FLAD) and was published by Glaciar.

Robotics technology has been applied to a wide variety of sectors and with a higher economic and social impact. In the last decades it has been one of the main elements of industrial manufacturing automation where about 1.5 million robots are currently operating, which means that 4 to 5 million workers are operating those systems. From 2014 to 2016, robot installations are estimated to increase by 6% on average per year. Besides this, in recent years the number of professional service robots has increased enormously in military and civil applications (around 130 thousand units).

The focus of the following article is on the use of new robotic systems in the manufacturing industry with respect to the social dimension. Since “intuitive” human–machine interaction (HMI) in robotic systems becomes a significant objective of technical progress, new models of work organization are needed. This hypothesis will be investigated through the following two aims: The first aim is to identify relevant research questions related to the potential use of robotic systems in different systems of work organization at the manufacturing shop-floor level. The second aim is to discuss the conceptualization of (old) organizational problems of human–robot interaction (HRI). In this context, the article reflects on the limits of cognitive and perceptual workload for robot operators in complex working systems. This will be particularly relevant whenever more robots with different “roles” are to be increasingly used in the manufacturing industry. The integration of such complex socio-technical systems needs further empirical and conceptual research with regard to “social” aspects of the technical dimension. Future research should, therefore, also integrate economic and societal issues to understand the full dimensions of new human–robot interaction in industry today.

Portugal has been referred as one example of lower levels of integration of social partners in the governance of education and training systems (Sanz de Miguel, 2017). There is lack of research about the effectiveness of the governance of the only program close to the Dual VET concept: the Apprenticeship system. A pilot project of Dual VET ran from 2012 and terminated in 2016 without substantial evaluation. The objective of this paper is to provide an overview of the role social partners have in the governance of the existing Portuguese Apprenticeship system. We carried out extensive review of the scientific and grey literature about Dual VET for youngsters in Portugal, as well as database queries to official statistical sources. Our research reveals a complex formal role: The employment agency IEFP provides funding for Apprenticeship and negotiates with the main social partners the allocation of the Single Social Tax for its regional centres. Indirectly, many social partners are formally involved in the general VET governance participating in various coordination and monitoring structures of the National System of Qualifications and other regulatory agencies (IEFP and ANQEP). In this article we also discuss possible causes for the failure of the pilot Dual VET, which took effect within the scope of a curricular review of the primary and secondary education.