Nuclear Inst. and Methods in Physics Research, A, 1014 (2021) 165701. doi:10.1016/j.nima.2021.165701

Physics Letters B, 809 (2020) 135748. 10.1016/j.physletb.2020.135748

Co-sputtering of SiO2 and high-$ąppa$ Ta2O5 was used to make multicomponent gate dielectric stacks for In-Ga-Zn-O thin-film transistors (IGZO TFTs) under an overall low thermal budget (T = 150 °C). Characterization of the multicomponent layers and of the TFTs working characteristics (employing them) was performed in terms of static performance, reliability, and stability to understand the role of the incorporation of the high-$ąppa$ material in the gate dielectric stack. It is shown that inherent disadvantages of the high-$ąppa$ material, such as poorer interface properties and poor gate insulation, can be counterbalanced by inclusion of SiO2 both mixed with Ta2O5 and as thin interfacial layers. A stack comprising a (Ta2O5)x(SiO2)100 − x film with x = 69 and a thin SiO2 film at the interface with IGZO resulted in the best performing TFTs, with field-effect mobility (µFE) ≈ 16 cm2·V−1·s−1, subthreshold slope (SS) ≈ 0.15 V/dec and on/off ratio exceeding 107. Anomalous Vth shifts were observed during positive gate bias stress (PGBS), followed by very slow recoveries (time constant exceeding 8 × 105 s), and analysis of the stress and recovery processes for the different gate dielectric stacks showed that the relevant mechanism is not dominated by the interfaces but seems to be related to the migration of charged species in the dielectric. The incorporation of additional SiO2 layers into the gate dielectric stack is shown to effectively counterbalance this anomalous shift. This multilayered gate dielectric stack approach is in line with both the large area and the flexible electronics needs, yielding reliable devices with performance suitable for successful integration on new electronic applications.

Three new additional skull specimens of Talarurus plicatospineus have been recovered from the Upper Cretaceous (Cenomanian–Santonian) Bayanshiree Formation, of Bayan Shiree cliffs, eastern Gobi Desert, Mongolia. The skulls feature unique characters such as an anteriorly protruded single internarial caputegulum, around 20 flat or concave nasal-area caputegulae surrounded by a wide sulcus, a vertically oriented elongate loreal caputegulum with a pitted surface, an elongate lacrimal caputegulum positioned above the posterodorsal border of the maxilla, two longitudinally arranged large frontoparietal caputegulae surrounded by smaller rhomboid caputegulae, small but elongate medial supraorbital caputegulae, a posterior supraorbital caputegulum that is four times larger than the anterior one, up to three transverse parallel grooves on the dorsal surface of the posterior supraorbital caputegulum, postocular caputegulae along the ventral to posterior rim of the orbit that extend almost to the anteroventral margin of the squamosal horn, a longitudinal furrow tapering towards the apex of the squamosal horn, a lateral nuchal caputegulum four to five times larger than other nuchal caputegulae, and a pterygovomerine keel with a ventral margin that is dorsally positioned to the alveolar ridge. The phylogenetic analysis result showed that Talarurus is sister to the clade that includes the derived Asian ankylosaurines (Saichania chulsanensis, Tarchia kielanae, and Zaraapelta nomadis). It also shows that there was dispersal of ankylosaurines from Asia into western North America before the Cenomanian. Moreover, the rostral differences between Talarurus and Tsagantegia, another ankylosaur from the same formation, suggest possible niche partitioning between these taxa.

In the current literature we can find mainly two approaches to the
SDE regime switching modeling. The traditional one, the externally induced
regime switching diffusions is described by the switching being derived from
a separate continuous time Markov process, with a finite, or denumerable,
state space { indexing the regimes { the random times of the regime switches
being exactly the jump times of the finite valued Markov process. There is a
first alternative approach in which the regime switching occurs whenever the
trajectory enters in some prescribed region on the state space; the regions we
consider will be mainly open intervals defined by unknown thresholds for the
trajectories; thresholds that, in principle, should also be estimated. In this
approach the partitioning of the the state space is already defined in the drift
and volatility of the SDE. In a second alternative approach the switching occurs
in a random way but at some random times defined when the trajectories hit
some prescribed thresholds, that again, must be estimated. We may designate
these two alternative approaches as auto-induced regime switching diffusions
as there is no external noise source to force the switching occurrence. We prove
a generalization of an existence result of the existence of auto-induced regime
switching SDE solutions for irregular coefficients and a result that encompasses
some of the cases of both externally and auto-induced regime switching SDE
solutions.

In this paper we study the widely considered endomorphisms and weak endomorphisms of a finite undirected path from monoid generators perspective. Our main aim is to determine the ranks of the monoids $wEnd P_n$ and $End P_n$ of all weak endomorphisms and all endomorphisms of the undirected path $P_n$ with $n$ vertices. We also consider strong and strong weak endomorphisms of $P_n$.

The lithostratigraphy of the Triassic deposits of the Jameson Land Basin in central East Greenland is revised. The new Scoresby Land Supergroup is now composed of the Wordie Creek, Pingo Dal, Gipsdalen and Fleming Fjord Groups. This paper only deals with the lithostratigraphy of the late Early-Late Triassic continental deposits of the latter three groups with emphasis on the vertebratebearing Fleming Fjord Group. The new Pingo Dal Group consists of three new formations, the Rødstaken, Paradigmabjerg and Klitdal Formations (all elevated from members), the new Gipsdalen Group consists of three new formations, the Kolledalen, Solfaldsdal (with the new Gråklint Member) and Kap Seaforth Formations (all elevated from members), and the new Fleming Fjord Group is subdivided into three new formations, the Edderfugledal, Malmros Klint and Ørsted Dal Formations (all elevated from members). The Edderfugledal Formation contains two cyclic bedded, lacustrine members, a lowermost Sporfjeld Member (elevated from beds), and an uppermost Pingel Dal Member (elevated from beds). The lacustrine red beds of the Malmros Klint Formation are not subdivided. The lacustrine and fluvial Ørsted Dal Formation contains three new members. In the eastern and central part of the basin, the formation is initiated by cyclic bedded, red lacustrine mudstones of the Carlsberg Fjord Member (elevated from beds), while in the northwestern part of the basin the lowermost part of the formation is composed of grey fluvial conglomerates and sandstones with subordinate red mudstones of the Bjergkronerne Member (elevated from beds). The uppermost part of the formations in most of the basin is composed of cyclic bedded, variegated lacustrine mudstones and grey to yellowish marlstones of the Tait Bjerg Member (elevated from beds). The sediments in the Fleming Fjord Group contain remains of a rich and diverse vertebrate fauna including dinosaurs, amphibians, turtles, aeotosaurs, pterosaurs, phytosaurs and mammaliaforms. Most vertebrate bones have been found in uppermost Malmros Klint Formation, and in the Carlsberg Fjord and Tait Bjerg Members. The Norian–early Rhaetian, lacustrine Fleming Fjord Group was deposited at about 41° N on the northern part of the supercontinent Pangaea. Lacustrine sedimentation was controlled by seasonal as well as longer-term (orbital) variation in precipitation. Precipitation was probably brought to the basin by southwesterly winds. The lacustrine sediments of the uppermost Fleming Fjord Group show deposition during increasingly humid conditions changing the lake environment from an ephemeral lake-steppe area to a perennial lake. This evolution of lake environment suggests a change from a winter-wet temperate climate to one with precipitation throughout the year.

The elastic parameters, strengths, and intralaminar fracture toughness are determined for an E-Glass polymer composite material system, statically and at high strain rate, adapting methodologies previously developed by the authors for different carbon composites. Dynamic experiments are conducted using tension and compression Split-Hopkinson Bars (SHBs). A unique set of experimental parameters is obtained, and reported together with the experimental set-up, in order to ensure reproducibility. While in-plane elastic and strength properties were obtained by testing one specimen geometry, intralaminar fracture properties required the testing of different sized notched specimens with scaled geometries. This allowed the use of the size-effect method for the determination of the dynamic R-curve. When comparing these results with those previously obtained for a carbon/epoxy material system, it is observed that the dynamic fracture toughness exhibits a much more significant increase in both tension and compression. The obtained results permit the identification of the softening law at different strain rates, allowing its use in any analytical or numerical strength predictive method.

Due to the ongoing technical advancements in robotics, new organizational and occupational impacts are expected in different sectors. The contribution of António Moniz and Bettina-Johanna Krings focuses on the social conditions under which technology is embedded into production processes. Thus, social distribution processes, demographic change, sustainability becomes more and more important when reflecting about "technology futures".
In particular they will ask:
How does automation change work & working conditions?
Which expectations on technology are strengthen-ing the concepts of work?
Which regulations and ethics principles must be considered (safety, autonomy, control)?
Which new competences and qualification dimen-sions will be raised for non-routine tasks in auto-mated environments?
Which new types of human-machine interaction can be developed with increased cyber-physical system application at the shopfloor?

This 1st Report of the project CrowdWork21 presents a summary of the information collected about workers in digital platforms by country (German, Hungary, Portugal and Spain). Each national report describes first the scientific debates about workers of digital platforms. After, the reports present the information collected about the national public debates and identifies the angles normally covered by the media in relation to the organisation of digital workers. Lastly, the reports present initial conclusions about the information collected in each country.

Important requirements for the modern electric drives are the high overload capacity and a wide range of speed control. A two-phase adjustable low-power drive has these properties, but its implementation in small-scale mechanics is hindered by the need a frequency converter that provides a three-phase power grid into a two-phase network, which is important when the power of the mechanisms increases. Previous studies have already shown the possibility of using a typical frequency converter based on a three-phase full-bridge voltage inverter applying space-vector PWM method. The switching frequency of the inverter remains, unfortunately, relatively high. It is not possible to reduce this frequency without degrading the harmonic composition. The goal of this work is to develop an algorithm for controlling the two-phase electric drive system, while reducing the numberof commutations of the switching devices of the three-phase inverter, and at the same time keeping the deviations of the instantaneous values of the phase currents close enough to the reference.