jmc-xavier

AbstractThe behaviour of standard boltedsteel connections submitted to monotonic loads, through the use of numerical models, is presented in the current paper.The bolted connections allow speed up constructive processes in an increasingly competitive and globalized world in which the costs are a decisive factor in the development of a project. The use of computational tools in the analysis of bolted connections becomes determinant, mainly for new solutions or solutions less explored in terms of design codes.Throughout the years, bolted connections have been suffering transformations resulting from research activities performed by many authors. Rivets have been replaced by bolts, the main achievement being the pre-stressed bolts. Methodologies based on finite element analyses were proposed for double shear bolted connection. The non-linear behaviour of these connections is investigated and their performances are compared. In the numerical modelling of the bolted connection, linear elastic and elastoplastic analyzes reveal that there are two slip levels associated with local non-linearities caused by the contact pairs, which vary with clamping stresses.

This work addresses the reconstruction of strain gradient fields at the wood growth ring scale from full-field deformation measurements provided by digital image correlation. Moreover, the spatial distribution of the earlywood and latewood radial modulus of elasticity is assessed. Meso-scale tensile tests are carried out on Pinus pinaster Ait. wooden specimens oriented in the radial–tangential plane under quasi-static loading conditions. A parametric analysis of the two-dimensional digital image correlation extrinsic and intrinsic setting parameters is performed, in a balance between spatial resolution and resolution. It is shown that the parametric module is an effective way to quantitatively support the choice of digital image correlation parameters in the presence of the high deformation gradient fields generated by the structure–property relationships at the scale of observation. Under the assumption of a uniaxial tensile stress state, the spatial distribution of the radial elastic modulus across the growth rings is obtained. It is observed that the ratio of the radial modulus of elasticity between latewood and earlywood tissues can vary significantly as a function of the digital image correlation parameters. It is pointed out, however, that a convergence value can be systematically established. Effectively, earlywood and latewood stress–strain curves are obtained and elastic properties are determined assuming the converged digital image correlation setting parameters.

Abstract Pipelines and piping components may experience large cyclic deformations during a reduced number of cycles (Ni = 1�100 cycles), when subjected to extreme cyclic loading events (e.g. hurricanes, support settlements, earthquakes). In accordance with these loading scenarios, a lateral movement can be applied to the pipeline inducing bending stresses that gradually promotes strain localization, due to progressive plastic instabilities (buckling), damage evolution and final failure. This work aims at characterizing ultra-low cycle fatigue (ULCF) behaviour of the \{X52\} piping steel under bending and local buckling state. An experimental program was carried out to derive \{ULCF\} data for smooth, notched and flat-grooved specimen geometries under cyclic bending. Furthermore, the small-scale tests were simulated in ABAQUS� with the objective of computing the parameters governing the fatigue damage models. The classical Coffin-Manson strain-life relation commonly used in the low cycle fatigue (LCF) regime is proposed to model the fatigue lives. In addition, the Xue model, particularly dependent of the monotonic fracture strain was also used for the prediction of the number of cycles until the crack initiation. The numerical data obtained with these models are compared, being achieved similar fatigue lives predictions for notched plane specimens. For the case of flat-grooved specimens which provides plain strain conditions, an overestimation from the Coffin-Manson relation was observed while the Xue model reproduces very good results for both specimens' series.