Corneliu Cismasiu

Shock absorbers have been widely used in the automotive and aeronautical industries for many years. Inspired on these devices, the paper presents an analytical and numerical assessment of a high performance protective system for building structures against blast loads, which is composed of a shielding element connected to the main structure, at the floor levels, through ductile Energy Absorbing Connectors (EACs). The EACs exploit the external tube inversion mechanism to absorb a significant part of the imparted kinetic energy from the blast wave. While the system prototype has been developed in laboratory, it was characterized and tested in a full-scale blast testing campaign. A validated finite element model was used next to analyze its performance in a more demanding design scenario. The introduction of EACs notably reduces the peak horizontal loads and the kinetic energy transferred to the protected structure, being expected a significant reduction of the stresses in the supporting vertical elements, in addition to the protection of structural and non-structural members. These results encourage further studies of the presented protective system that can be potentially employed for a large variety of blast threat scenarios, especially when increasing the stand-off is not a possible/viable option and sensitive facilities have to be protected.

Being able to efficiently mitigate the effects of blast loads on structures, sacrificial cladding solutions are increasingly used to protect structural elements from the effects of accidental explosions and/or terrorist attacks. The present study analyses the loss of effectiveness of a deterministically designed sacrificial cladding when variability in the material properties and uncertainties in the mechanical model are considered. The results of an experimental campaign are used to validate the numerical models that allow the deterministic design of a sacrificial cladding which successfully improves the blast resistant capabilities of a given structural element. Nonetheless, it is shown that, taking into account the probabilistic variability of key parameters is of vital importance when designing sacrificial cladding solutions, since, when not properly designed for the structural element it intends to protect, adding a sacrificial cladding might negatively impact its blast resistant capabilities. Additionally, it is concluded that the deterministic approach might be against safety. In the reported case study, when comparing the admissible charge weight yielding from the deterministic and probabilistic approaches, one verifies that the former allows a higher charge weight.

This work studies the low-velocity impact response of 3D-printed layered structures made of thermoplastic materials (PLA and PETg), which form sacrificial claddings for impact protection. The analyzed structures are composed of crushable cellular cores placed in between terminal stiffening plates. The cores tessellate either honeycomb hexagonal unit cells, or hexagonal cells with re-entrant corners, with the latter exhibiting auxetic response. The given results highlight that the examined PETg protectors exhibit higher energy dissipation ratios and lower restitution coefficients, as compared to PLA structures that have the same geometry. It is concluded that PETg qualifies as an useful material for the fabrication of effective impact protection gear through ordinary, low-cost 3D printers.