Armando Nunes Antão

This paper investigates the implementation of the Extended-Matsuoka–Nakai yield criterion on a strict Limit Analysis finite element formulation. The current approach is based on a three-field mixed finite element model and the Alternating Direction Method of Multipliers optimization algorithm. With the support of duality principles two variants are derived, the lower bound and the upper bound element. The main novelty of this work is the development of an efficient iterative predictor–corrector scheme, customized for the Extended-Matsuoka–Nakai. This scheme is an indispensable requirement for this formulation. To conclude four numerical examples are presented to assess the effectiveness and efficiency of the numerical tool.

The paper describes the three-dimensional numerical implementation of the Lade-Duncan criterion in a finite element limit analysis (FELA) code. Validation is done using examples with a known solution. To conclude the proposed numerical tool is applied to the calculation of the ultimate bearing capacity of square footing.

This paper deals with the determination of upper and lower bounds for the three-dimensional undrained stability of shallow tunnels. The tunnel is circular and a distance between its face and its lining is considered. The soil shear strength is modeled using the Tresca criterion. Results of the upper and lower bounds of the stability number are presented, for several geometrical and resistance configurations and their comparison with previous results is made, showing the clear improvement obtained. Finally, equations approaching the stability number are proposed.

This paper addresses an implementation of the upper bound limit analysis theorem using a parallel mixed finite element formulation. The intrinsic characteristics of the adopted upper bound formulation proved to be suitable to adapt it to an efficient parallelization scheme. In order to illustrate the computational power provided by the new parallel processing method, accurate upper bound collapse load estimates, for 3D problems, are produced using a cluster of common PC machines.

A strict upper-bound limit analysis finite element formulation is used to estimate shape factors s_gamma and s_q for determining the bearing capacity of shallow foundations using the classic bearing capacity formula. The finite element formulation uses a quadratic approximation for the velocity field, an extension of a previously published Augmented Lagrangian formulation with a linear velocity field, and was implemented for a parallel processing environment. Results from determining the limit loads under three-dimensional conditions are presented and compared with previously published data. The results obtained allow a strict upper-bound determination of the shape factors. Furthermore, a practical proposal for these factors is made and compared with other proposals made by other authors.

A numerical implementation of the upper-bound theorem of limit analysis is applied to determine two-dimensional (2D) and three-dimensional (3D) active horizontal earth pressure coefficients considering seismic actions through a horizontal seismic coefficient. Results are obtained for vertical wall, horizontal soil, different friction angles of the soil, soil-to-wall friction ratios, horizontal seismic coefficients and wall width-to-height ratios. The few cases for which 3D active earth pressure coefficients are available in the literature using upper-bound methods were used for comparison with the corresponding earth pressure coefficients obtained in this study. This showed a general improvement of these results, which allows expecting a good accuracy for the set of cases studied. The ratios between the 3D and 2D horizontal active earth pressure coefficients are found to be practically independent of the soil-to-wall friction ratio. An equation is proposed for calculating these ratios. This equation can be easily used in the design of geotechnical structures requiring the determination of 3D active earth pressure coefficients.