@article {{\'A}guas2002220,
	title = {Role of the i layer surface properties on the performance of a-Si:H Schottky barrier photodiodes},
	journal = {Sensors and Actuators, A: Physical},
	volume = {99},
	number = {1-2},
	year = {2002},
	note = {<p>cited By 2</p>
},
	pages = {220-223},
	abstract = {<p>In this work, we study the influence of the hydrogenated amorphous silicon (a-Si:H) surface treatment on the J-V characteristics of a-Si:H/Pd Schottky barrier photodiodes. The a-Si:H surface were etched, thermally oxidised and wet oxidised by H2O2. The a-Si:H films were characterised by spectroscopic ellipsometry, were we found that all the oxidation techniques promote an increase of the surface oxide thickness that was confirmed by the increase of the barrier height. The highest barrier was achieved by the H2O2 oxidation where a value of 1.17 eV was found. As a result of the barrier height increase, the dark reverse current density decreases up to 10-10 A/cm2 and the signal to noise ratio increases up to 106. The open circuit voltage under AM1.5 illumination conditions also increases from 0.4 to 0.5 V. These results reveal the importance of the a-Si:H surface preparation prior to metallization to improve the Schottky photodiodes properties. {\textcopyright} 2002 Elsevier Science B.V. All rights reserved.</p>
},
	doi = {10.1016/S0924-4247(01)00892-5},
	url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-0037198095\&partnerID=40\&md5=60ab192ed01f9ff46a623df0c76a8eac},
	author = {{\'A}guas, H., Fortunato, E., Martins, R.}
}
