@article {Pereira20081544,
	title = {High k dielectrics for low temperature electronics},
	journal = {Thin Solid Films},
	volume = {516},
	number = {7},
	year = {2008},
	note = {<p>cited By 41</p>
},
	pages = {1544-1548},
	abstract = {<p>In this work the electrical and structural properties of two high k materials as hafnium oxide (HfO2) and tantalum oxide (Ta2O5) produced at room temperature are exploited. Aiming low temperature processing two techniques were employed: r.f. sputtering and electron beam evaporation. The sputtered HfO2 films present a nanocrystalline structure when deposited at room temperature. The same does not happen for the evaporated films, which are essentially amorphous. The density and the electrical performance of both sputtered and evaporated films are improved after annealing them at 200~{\textdegree}C. On the other hand, the Ta2O5 samples deposited at room temperature are always amorphous, independently of the technique used. The density and electrical performance are not so sensitive to the annealing process. The set of data obtained show that these dielectrics processed at temperatures below 200~{\textdegree}C present promising properties aiming to produce devices at low temperature with improved interface properties and reduced leakage currents. {\textcopyright} 2007 Elsevier B.V. All rights reserved.</p>
},
	doi = {10.1016/j.tsf.2007.03.088},
	url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-38649119816\&partnerID=40\&md5=acd41a0cd2daf1ca74cbfc9acfc8e70d},
	author = {Pereira, L.a , Barquinha, P.a , Fortunato, E.a , Martins, R.a , Kang, D.b , Kim, C.J.b , Lim, H.b , Song, I.b , Park, Y.b}
}
