Regina Monteiro

Cathode ray tube glass waste was used to produce glass foams by a powder sintering route. The glass waste powder was mixed with small amounts (5 and 8 wt%) of coal fly ash, which acted as foaming agent, and the compacts of the mixed powders were heated at different sintering temperatures in the range 600–800 °C for various dwell times (30–120 min). The effect of the different processing conditions on the microstructural characteristics (porosity, pore size and pore size distribution), mechanical resistance and thermal conductivity of the produced foams was investigated. The volume of pores tended to increase with sintering temperature and time, and glass foams (with a porosity higher than 50 %) were only achieved after sintering at 750 °C. The average pore size increased with sintering temperature and dwell time, and pore growth was particularly accentuated at 800 °C, where coalescence of the pores occurred, with a consequent decrease in compressive strength. Selected combinations of the sintering temperature, dwell time and foaming agent led to glass foams with a satisfactory microstructural homogeneity, which exhibited mechanical strength and thermal conductivity values similar to commercial foams used as thermal insulating materials. © 2016, Springer Science+Business Media New York.

Cathode Ray Tube (CRT) waste glasses produced from dismantling TV sets were used to prepare glass foams by a simple and economic processing route, consisting of a direct sintering process of mixtures of CRT waste as glass powder with different foaming agents (coal fly ash and limestone quarrying residues). The influence of firing temperature, amount and type of foaming agent on the apparent density, pore size distribution and compressive strength have been studied. The aim of the work was to investigate the possibility to obtain glass foams using exclusively wastes as starting materials, and therefore replacing the conventional raw materials. © 2015 Taylor & Francis Group, London.