@article {Barbosa2004,
	title = {{Characterization of TiAl Alloys by Secondary Ion Mass Spectrometry}},
	journal = {Materials science forum},
	volume = {455-456},
	year = {2004},
	note = {<p>n/a</p>
},
	pages = {653{\textendash}656},
	abstract = {<p>Titanium aluminides are arising as a valuable alternative to superalloys in applications where the ratio resistance/density is important. Together with excellent mechanical and corrosion properties at high temperatures, such characteristics are very attractive for applications in the aeronautical, aerospace and automotive industries. However, the current high selling price, due to high costs of production and raw materials and the need of very specific equipment, are limitative factors for further applications. With the end of the cold war, and the decrease of traditional markets of TiAl, the strategy to develop other applications, strongly depends on the decrease of production costs. An alternative to the present production routes might be the use of traditional casting techniques, by induction melting of the alloy in a ceramic crucible and pouring into ceramic moulds, made by the investment casting process. However, due to the high reactivity of Ti alloys, the use of traditional ceramic materials cannot be used, as they lead to oxide formation and oxygen pick up both from the crucible and the moulding materials. In this work, the relative oxygen concentration of Ti-48Al castings was measured by SIMS ó Secondary Ion Mass Spectrometry. This technique provides a direct measurement of the isotopic composition with high sensitivity. The cylindrical samples were specially prepared to allow the analysis of the area close to the border. Oxygen profiles were acquired for samples obtained with different mould materials. The comparison of such profiles with hardness ones gives insight in the role of the oxygen concentration in the properties of the alloy and in the choice of the most suitable materials for TiAl production</p>
},
	keywords = {abstract, and corrosion, as a valuable alternative, attractive for applications in, density is important, induction melting, interface analysis, investment casting, properties at high temperatures, sims, such characteristics are very, surface, the, tial, titanium aluminides are arising, to superalloys in applications, together with excellent mechanical, where the ratio resistance},
	author = {Barbosa, J and O. M. N. D. Teodoro and Moutinho, A M C and Ribeiro, S and Monteiro, C}
}
