Teresa Avilés

Cobalt compounds of the general formula [COX2(alpha-diimine)], where X = Cl or I and the alpha-diimines are 1,4-diaryl-2,3-dimethyl-1,4-diaza-1,3-butadiene (Ar-DAB) and bis(aryl)acenaphthenequinonediimine (Ar-BIAN) were synthesized by the direct reaction of the anhydrous cobalt salts CoCl2 or CoI2 and the corresponding alpha-diinline ligand in dried CH2Cl2. The synthesized compounds are [Co(Ph-DAB)Cl-2] (1a), [Co(o,o',p-Me3C6H2-DAB)Cl-2] (1b), and [Co(o,o'iPr(2)C(6)H(3)-DAB)Cl-2] (1c) with the ligands Ar-DAB, and also [Co(o,o',p-Me3C6H2-BIAN)I-2] (2'b) with the ligand Ar-BIAN. The crystal structures of all the compounds were solved by single-crystal X-ray diffraction. In all cases the cobalt atom is in a distorted tetrahedron, which is built up of two halide atoms and two nitrogen atoms of the alpha-dimune ligand. X-band EPR measurements of polycrystalline samples performed on compounds 1b, 1c, and 2'b indicate a high-spin Col, ion (S = 3/2) in an axially distorted environment. Single-crystal EPR experiments on compounds 1b and 1c allowed us to evaluate the orientation of the g tensor in the molecular frame. (c) Wiley-VCH Verlag GmbH & Co.

New cationic mono-cyclopentadienyl complexes of Co(III) containing mono or bidentate nitrogen donor ligands of general formula [Co(eta (5)-C5H5)(PPh3)L-2][BF4](2) (L = NC-CH3, 2, and NC = Ph, 3) or [Co(eta (5)-C5H5)(PPh3)(L-L)[BF4](2), [L-L = 2,2 ' -bisimidazole (H(2)biim) (4) and dipyridylamine [HN(NC5H5)(2)] (5) have been synthesised by the stoichiometric reaction of the Co(III) complex Co(eta (5)-C5H5)(PPh3)I-2 (1), with Ag[BF4] and the appropriate ligand in CH2Cl2. Under the same conditions and using;trans-azobenzene as a ligand, an orthometalation reaction took placet giving the new compound [Co(eta (5)-C5H5)(PPh3)(kappa -C,kappa -N-C6H4N=NPh)][BF4] (6) in high yield. The structural characterisation of compounds 4 and 6, and of the starting compound Co(eta (5)-C5H5)(PPh3)I-2 (1) was done by single-crystal X-ray diffraction studies. DFT calculations (ADF program) were performed in order to understand the orthometallation reaction. (C) 2001 Elsevier Science B.V. All rights reserved.

The new compound [Co(eta(5)-C5H5)(dppf-P,P')I]I, 1, was synthesised by the stoichiometric reaction of the Co(III) complex [Co(eta(5)-C5H5)(CO)I-2], 2, with 1,1'-bis(diphenylphosphino)ferrocene (dppf) in CH2Cl2, and was characterised by multinuclear NMR spectroscopy. Exposure to air of THF or CH2Cl2 solutions of compound 1 gave, in an unexpected way, a polymeric chain comprising bridging 1,1'-bis(oxodiphenylphosphoranyl) ferrocene (dppfO(2)) joining tetrahedral Co(II) units [CoI2(mu-dppfO(2))](n), 3. Attempts to obtain the polymeric chain 3 by the direct reaction of dppfO(2) with CoI2, in CH2Cl2, gave instead the monomeric compound [CoI2(dppfO(2))], 4, in which dppfO2 is coordinated in a chelating mode. The structural characterisation of compounds 2, 3, and 4 was carried out by single crystal X-ray diffraction studies. The magnetic behaviour of [CoI2(dppfO(2))] and [CoI2(mu-dppfO(2))](n) was studied, and the results are consistent with tetrahedral S = 3/2 Co-II, possessing a (4)A(2) ground state, and S = 0 Fe-II. In these compounds, Co-II negative zero field splittings were determined from an analysis of the magnetic susceptibility temperature dependence, with D/k = -13 and -14 K for CoI2(dppfO(2)) and [CoI2(mu-dppfO(2))](n), respectively. DFT calculations were performed in order to understand the electronic structure of [Co(eta(5)-C5H5)(dppf-P,P')I]I, 1, as well as that of the paramagnetic specie [CoI2(dppfO(2))], 4. The [CoI2(mu-dppfO(2))](n) chain was also analysed and found to behave very similarly to the monomeric iodine derivative 4. The calculations showed the unpaired electrons to be localized on the Co(II) centre in all these species. The rather complicated electrochemical behaviour exhibited by the dppf complex [Co-III(eta(5)-C5H5)(dppf-P,P')I]I and by [Co(dppfO(2))I-2] is discussed.

The reactivity of arylisocyanates in supercritical carbon dioxide (scCO(2)) was studied using the easily available complexes CpCo(CO)(2), CpCoPPh3Me2 and Ni(cod)(2) as catalysts. A study of the solubility of the catalysts in scCO(2) was undertaken in all cases. The complex CpCo(CO)(2) is very soluble, 1.7 x 10(-1) mol kg(-1), while CpCoPPh3Me2 has a lower solubility, 7.2 x 10(-3) mol kg(-1), and Ni(cod)(2) is insoluble in scCO(2). For comparison purposes, the reactions were performed in parallel in scCO(2), using toluene as a solvent and just with the neat liquid arylisocyanate. Reactions in scCO(2) either do not take place at all, when CpCo(CO), is used as catalyst, or occur with low yields affording the trimer of the corresponding arylisocyanate when CpCoPPh3Me2 or Ni(cod)(2) act as catalysts. No incorporation of CO2 into the organic substrate was observed. Better conversions to triarylisocyanate were obtained when the reactions were performed by direct mixture of the liquid arylisocyanate ArNCO (Ar = Ph, p-CH3C6H4, p-CH3OC6H4) and the catalyst. Using toluene as a solvent, the yields of the trimers were lower than those obtained in neat arylisocyanate, and in some cases they were not formed at all. For instance in the reaction of CpCo(CO), and tolylisocyanate either under stoichiometric or catalytic conditions the trimer is not obtained, instead the compound H2R3N3C2O2 (R = CH3C6H4), was isolated in low yield. In the reaction of Ni(cod)(2)/PPh3 with phenylisocyanate, the trimer was formed but in low yield. The lower yields of the trimers observed when the reactions were performed in scCO(2) or in toluene, compared to that observed in neat arylisocyanates, indicates that the decrease in reactivity is due to a decrease in concentration. (C) 2001 Elsevier Science B.V. All rights reserved.

The SiMe3 group (TMS), introduced as a substituent at the cyclopentadienyl ligand, is found to magnify the solubility of the corresponding metal complexes in supercritical carbon dioxide (scCO(2)). This is verified from comparative solubility measurements of the species (eta(5)-Me-3 SiC5H4)MoO2 Cl, 1a, (eta(5)-Me3SiC5H4)(2)ZrCl2, 2a, and (eta(5)-Me3SiC5H4)Co(CO)I-2.0.5(I-2), 3a (newly synthesised), and of their unsubstituted precursors 1b-3b, respectively. In spite of the increased solubility, the chemical, structural and reactivity properties of the TMS derivatives are scarcely affected. Confirmation comes from a detailed study of the cobalt complex 3a that includes X-ray structural determination. The geometry is most similar to that of the precursor 3b while an apparently different Co-CO interaction is observed in the carboxylated analogue [(eta(5)-PhCH2CO2C5H4)Co(CO) I-2, 3c]. The problem is computationally tackled by using the DFT B3LYP method. The optimised geometries of the simplified models of 3a-3c are all very similar. In particular, the computed stretching frequency of the unique CO ligand is consistent with the insignificant influence of the TMS group while it suggests a reduced amount of metal back-donation in 3c. It is inferred that the TMS complexes 1a-3a, while having higher solubility in scCO2, maintain almost unaltered the electronic and chemical features of their parent compounds. In particular, the role of 1a-3a as catalysts, that is well documented for homogeneous solutions, remains unaltered in the very different scCO(2) environment. The assumption is experimentally validated for 1a by performing with the latter two classic catalytic processes. The first process is the oxidation of PPh3 that is achieved by using molecular oxygen as an oxidant. The second example concerns the epoxidation of cyclohexene achieved in presence of tert-butyl hydroperoxide (TBHP).

n/a

{New cationic Ag(I) complexes were prepared by reaction of AgBF4 with two thioether-functionalized bis-(diphenylphosphino) amine ligands, Ph2PN(p-ArSMe)PPh2 (L1) and Ph2PN(n-PrSMe)PPh2 (L2), and compared with those obtained from the unfunctionalized ligands Ph2PN(Ph)PPh2 (L3) and Ph2PN(n-Bu)PPh2 (L4), respectively. The complex {[}Ag-3(mu(3)-Cl)(2)(mu(2)-L1-P, P)(3)](BF4) (1 center dot BF4) contains a triangular array of Ag centres supported by three bridging L1 ligands and two triply-bridging chlorides. In contrast, ligand L2 led to the coordination polymer {[}\{Ag-2(mu(3)-L2,-P,P,S)(2)(MeCN)(2)\}\{Ag-2(mu(2)-L2-P,P)(2)(MeCN)(2) \}(BF4)(4)](n) (2) in which the tethered thioether group connects intermolecularly a Ag2 unit to the diphosphine bridging the other Ag2 unit. With L3 and L4, two similar complexes were obtained, {[}Ag-2(mu(2)-L3)(BF4)(2)] (3) and {[}Ag-2(mu(2)-L4)(BF4)(2)] (4), respectively, with bridging diphosphine ligands and a BF4 anion completing the coordination sphere of the metal. Complexes 1 center dot BF4 center dot CH2Cl2, 2 center dot THF, 3 center dot 3CH(2)Cl(2) and 4 have been fully characterized, including by single crystal X-ray diffraction.}

{The complex {[}Ph4P](2){[}Cu(bdt)(2)] (1(red)) was synthesized by the reaction of {[}Ph4P]2{[}S2MoS2CuCl] with H2bdt (bdt = benzene-1,2-dithiolate) in basic medium. 1(red) is highly susceptible toward dioxygen, affording the one electron oxidized diamagnetic compound {[}Ph4P]{[}Cu(bdt)(2)] (1(ox)). The interconversion between these two oxidation states can be switched by addition of O-2 or base (Et4NOH = tetraethylammonium hydroxide), as demonstrated by cyclic voltammetry and UV-visible and EPR spectroscopies. Thiomolybdates, in free or complex forms with copper ions, play an important role in the stability of 1(red) during its synthesis, since in its absence, 1(ox) is isolated. Both 1(red) and 1(ox) were structurally characterized by X-ray crystallography. EPR experiments showed that 1(red) is a Cu(II)-sulfur complex and revealed strong covalency on the copper-sulfur bonds. DFT calculations confirmed the spin density delocalization over the four sulfur atoms (76%) and copper (24%) atom, suggesting that 1(red) has a ``thiyl radical character{''}. Time dependent DFT calculations identified such ligand to ligand charge transfer transitions. Accordingly, 1(red) is better described by the two isoelectronic structures {[}Cu(I)(bdt(2), 4S(3-{*}))](2-) {[}Cu-II(bdt(2), 4S(4-))](2-). On thermodynamic grounds, oxidation of 1(red) (doublet state) leads to 1(ox) singlet state, {[}Cu-III(bd(t)2, 4S(4-))](1-).}

{The reactions of TCNE- and TCNQ-functionalized (TCNE: tetracyanoethylene and TCNQ: 7,7', 8,8'-tetra-cyanoquinodimethane) zwitterionic benzoquinonemonoimines with a Cu(I)-BIAN complex (BIAN = bis-(o, o'-bisisopropylphenyl)acenaphthenequinonediimine) have been investigated and found to follow a diversity of interesting patterns. The complexes {[}Cu(BIAN)(NCMe)(L2)]BF4 (2) and {[}Cu(BIAN)(L2)(2)]BF4 (4) were obtained by reacting {[}Cu(BIAN)(NCMe) 2] BF4 (1) with one and two equivalents of L2, respectively. Following similar procedures, the complexes {[}Cu(BIAN)(NCMe)(L3)] BF4 (6) and {[}Cu(BIAN)(L3)(2)]BF4 (7) were obtained by reaction of 1 with L3. The reaction of 2 with 0.5 equiv. of 4,4'-bipyridine afforded {[}\{Cu(BIAN)-(L2)\}(2)(mu-4,4'-bipyridine)](BF4)(2) (3). The complexes were characterized by multinuclear NMR, IR and UV-Vis spectroscopic techniques, mass spectrometry, cyclic voltammetry and elemental analysis. The molecular structures of complexes 3 center dot 4CH(2)Cl(2) and 4 center dot CH2Cl2 were determined by single crystal X-ray diffraction. An unexpected coordination polymer {[}Cu(L2(-))(2)](infinity) (5) was also structurally characterized, which contains Cu(II) centres chelated by two N, O-bound ligands resulting from the monodeprotonation of L2.}

{Three fluorinated Mo-Cu-thiolate isomers,{[}Ph4Ph{[}S2MoS2Cu(n-SPhF)], {[}n-SPhF = 2-fluorothiophenol (la)], 3-fluorothiophenol (lb), and 4-fluorothiophenol (1c)] were synthesized and spectroscopically characterized. The F-19-NMR signal of the fluorine atom in the.benzene has different chemical shift for each isomer, which is highly influenced by the local environment that can be manipulated by different solvents and solutes. The fluorine-19 chemical shift is an advantageous NMR structural probe in alternative to H-1-NMR {[}B.K. Maiti, T. Aviles, M. Matzapetakis, I. Moura, S.R. Pauleta, JJ.G. Moura, Eur. J. Inorg. Chem. (2012) 4159.], that can be used to provide local information on the pocket of the metal cluster in the Orange Protein (ORP). (C) 2014 Elsevier B.V. All rights reserved.}