@article {10843, title = {Structure and Morphologic Influence of WO3 Nanoparticles on the Electrochromic Performance of Dual-Phase a-WO3/WO3 Inkjet Printed Films}, journal = {Advanced Electronic Materials}, year = {2015}, note = {n/a}, month = {2015}, pages = {n/a-n/a}, abstract = {

The optimization of tungsten trioxide (WO3) nanoparticles produced via hydrothermal synthesis for application in electrochromic (EC) devices is reported. The structure and morphology of the nanoparticles are controlled by changing the acidity of the aqueous solvent added to the sol-gel precursor (peroxopolytungstic acid) during synthesis. Orthorhombic hydrated WO3 nanorods or monoclinic WO3 nanoslabs are obtained when HCl is added, while synthesis only in aqueous medium results in a mixture of both types of polymorphs. Dual-phase thin films are processed by inkjet printing deposition of the nanoparticles in flexible polyethylene terephthalate substrate with indium tin oxide coating (ITO PET) followed by the deposition of the precursor solution. When compared with purely amorphous tungsten oxide films, the dual phase ones present higher optical densities and improved capacity, and cyclability stability. The best results, obtained for orthorhombic hydrated nanoparticles (ortho-WO3{\textperiodcentered}0.33H2O), are due to its high surface area and improved conductivity. Additionally, the ex situ X-ray diffraction (XRD) lithiation studies show evidence of a higher distortion of the monoclinic when compared with the orthorhombic crystallographic structure, which contribute to the inferior EC performance. These results validate the use of inkjet printing deposition with low processing temperatures for EC dual-phase thin films containing optimized nanoparticles which are compatible with low-cost substrates.

}, keywords = {electrochromic materials, hydrothermal synthesis, inkjet printing, nanoparticles, tungsten oxides}, isbn = {2199-160X}, url = {http://dx.doi.org/10.1002/aelm.201400002}, author = {Santos, L{\'\i}dia and Wojcik, Pawel and Pinto, Joana V. and Elangovan, Elamurugu and Viegas, Jaime and Pereira, Lu{\'I}s and Martins, Rodrigo and Fortunato, Elvira} } @article {Nunes2015a, title = {{Charging effects and surface potential variations of Cu-based nanowires}}, journal = {Thin Solid Films}, year = {2015}, note = {n/a}, pages = {1{\textendash}9}, publisher = {Elsevier B.V.}, abstract = {

The presentwork reports charging effects and surface potential variations in pure copper, cuprous oxide and cu- pric oxide nanowires observed by electrostatic force microscopy (EFM) and Kelvin probe force microscopy (KPFM). The copper nanowires were produced by wet synthesis, oxidation into cuprous oxide nanowires was achieved throughmicrowave irradiation and cupric oxide nanowireswere obtained via furnace annealing in at- mospheric conditions. Structural characterization of the nanowireswas carried out byX-ray diffraction, scanning electron microscopy, transmission electron microscopy and energy dispersive X-ray spectroscopy. During the EFM experiments the electrostatic field of the positive probe charged negatively the Cu-based nanowires, which in turn polarized the SiO2 dielectric substrate. Both the probe/nanowire capacitance as well as the sub- strate polarization increased with the applied bias. Cu2O and CuO nanowires behaved distinctively during the EFMmeasurements in accordancewith their band gap energies. Thework functions(WF) of the Cu-based nano- wires, obtained by KPFM measurements, yieldedWFCuO N WFCu N WFCu2O

}, keywords = {Capacitive effects, charge mapping, Cu-based nanowires, Dielectric polarization, Electrostatic force microscopy, Kelvin probe force microscopy}, issn = {0040-6090}, doi = {10.1016/j.tsf.2015.11.077}, url = {http://dx.doi.org/10.1016/j.tsf.2015.11.077}, author = {Nunes, D. and Calmeiro, T.R. and Nandy, S. and Pinto, JV and Pimentel, A. and Barquinha, P. and Carvalho, P. A. and Walmsley, J C and Fortunato, E. and Martins, R.} } @article {10848, title = {Ion sensing (EIS) real-time quantitative monitorization of isothermal DNA amplification}, journal = {Biosensors and Bioelectronics}, year = {2014}, note = {

ORCID Reference type: [bibtex]; ORCID Reference: [@article{artins_Fortunato_Baptista_2013, title={Ion sensing (EIS) real-time quantitative monitorization of isothermal DNA amplification}, url={http://dx.doi.org/10.1016/j.bios.2013.08.029}, DOI={10.1016/j.bios.2013.08.029}, journal={Biosensors and Bioelectronics}, publisher={Elsevier }, author={Veigas, Bruno and Branquinho, Rita and Pinto, Joana V. and Wojcik, Pawel J. and Martins, Rodrigo and Fortunato, Elvira and Baptista, Pedro V.}, year={2013}, month={Aug}}]

}, month = {2014}, abstract = {n/a}, isbn = {0956-5663}, author = {Veigas, Bruno and Branquinho, Rita and Pinto, Joana V. and Wojcik, Pawel J. and Martins, Rodrigo and Fortunato, Elvira and Baptista, Pedro V.} }