Publications

Export 5 results:
Sort by: Author [ Title  (Desc)] Type Year
A B C D E F G H I J K L M N O P Q R S [T] U V W X Y Z   [Show ALL]
T
Oliveira-Lima, Jose A., João F. Martins, Celson Lima, Vasco Delgado-Gomes, João Pina, and Grzegorz Benysek. "Towards an energy model for supporting real time building energy management." 2012 IEEE 16th International Conference on Intelligent Engineering Systems (INES). 2012. 203-208. Abstract

Building energy management may simultaneously integrate multiple energy areas and sources of information. The coordination of synergies allow better-informed decisions, such as performing forecasts and adjustments of energy production and storage, while adapting electrical loads to off-peak times, when energy rates are lower. This work targets the improvement and optimization of energy management operations in buildings and large complexes, by introducing a conceptual model for supporting real-time advanced reasoning and inference towards efficient energy management.

Rodrigues, Amadeu, B. A. Potter, João Pina, Anabela Gonçalves, and Mário Neves. "Torque Modelling of a Superconducting Reluctance Machine." Electromotion Review (2003). AbstractWebsite
n/a
Steve, Inácio, João Pina, Stanimir Valtchev, Mário Neves, and Amadeu Rodrigues. "Topology of an Electrical Gearbox with Variable Poles for Induction and Superconducting Disc Motors." X Portuguese-Spanish Congress in Electrical Engineering. 2007. Abstract
n/a
Pina, J., P. Pereira, S. Valtchev, A. Gonçalves, Ventim M. Neves, A. Alvarez, and L. Rodrigues. "A test rig for thrust force measurements of an all HTS linear synchronous motor." Journal of Physics: Conference Series. 97 (2008): 012220. AbstractWebsite

This paper presents the design of a test rig for an all HTS linear synchronous motor. Although this motor showed to have several unattractive characteristics, its design raised a number of problems which must be considered in future HTS machines design. HTS electromagnetic properties led to the development of new paradigms in electrical machines and power systems, as e. g. in some cases iron removal and consequent assembly of lighter devices. This is due to superconductor's ability to carry high currents with minimum losses and consequent generation in the surrounding air of flux densities much higher than the allowed by ferromagnetic saturation. However, severe restrictions in HTS power devices design that goes further beyond cryogenic considerations must be accounted in. This is usually the case when BSCCO tapes are used as conductors. Its bending limitations and the presence of flux components perpendicular to tape surface, due to the absence of iron, have to be considered for it may turn some possible applications not so attractive or even practically unfeasible. An all HTS linear synchronous motor built by BSCCO tapes as armature conductors and two trapped-flux YBCO bulks in the mover was constructed and thrust force measurements are starting to be performed. Although the device presents severe restrictions due to the exposed and other reasons, it allowed systematising its design. A pulsed-field magnetiser to generate opposite fluxes for both YBCO bulks is also detailed. Thrust force numerical predictions were already derived and presented.

Pina, João, Pedro Pereira, S. Valtchev, A. Gonçalves, Mário Neves, and A. Rodrigues. "A test rig for thrust force measurements f an all HTS linear synchronous motor." 8th European Conference on Applied Superconductivity (EUCAS). 2007. Abstract

This paper presents the design of a test rig for an all HTS linear synchronous motor. Although this motor showed to have several unattractive characteristics, its design raised a number of problems which must be considered in future HTS machines design. HTS electromagnetic properties led to the development of new paradigms in electrical machines and power systems, as e. g. in some cases iron removal and consequent assembly of lighter devices. This is due to superconductor's ability to carry high currents with minimum losses and consequent generation in the surrounding air of flux densities much higher than the allowed by ferromagnetic saturation. However, severe restrictions in HTS power devices design that goes further beyond cryogenic considerations must be accounted in. This is usually the case when BSCCO tapes are used as conductors. Its bending limitations and the presence of flux components perpendicular to tape surface, due to the absence of iron, have to be considered for it may turn some possible applications not so attractive or even practically unfeasible. An all HTS linear synchronous motor built by BSCCO tapes as armature conductors and two trapped-flux YBCO bulks in the mover was constructed and thrust force measurements are starting to be performed. Although the device presents severe restrictions due to the exposed and other reasons, it allowed systematising its design. A pulsed-field magnetiser to generate opposite fluxes for both YBCO bulks is also detailed. Thrust force numerical predictions were already derived and presented.