João Murta Pina

Building energy management may simultaneously integrate multiple energy areas and sources of information. The coordination of synergies allow better-informed decisions, such as performing forecasts and adjustments of energy production and storage, while adapting electrical loads to off-peak times, when energy rates are lower. This work targets the improvement and optimization of energy management operations in buildings and large complexes, by introducing a conceptual model for supporting real-time advanced reasoning and inference towards efficient energy management.

An equivalent model and electromechanical characteristics for the disk motor was obtained based on the Steinmetz parameters. This paper describes a series of tests conducted on an axial flux motor, equipped with an aluminum rotor disc and an YBCO high temperature superconducting rotor disc, at liquid nitrogen temperature (77 K). The rotating magnetic field was produced by a four-pole, three-phase stator winding, at 50 Hz. At asynchronous permanent regime, Steinmetz-type models are able to describe both motors' behavior. From the performed tests, the parameters of both motors' models were deduced. A variable load was used to obtain both motor's characteristics (conventional and superconducting). Experimental obtained characteristics of both motors are compared with the ones predicted from parameters' calculation. The HTS motor provides high efficiency then the conventional ones.

An equivalent model and electromechanical characteristics for the disk motor was obtained based on the Steinmetz parameters. This paper describes a series of tests conducted on an axial flux motor, equipped with an aluminum rotor disc and an YBCO high temperature superconducting rotor disc, at liquid nitrogen temperature (77 K). The rotating magnetic field was produced by a four-pole, three-phase stator winding, at 50 Hz. At asynchronous permanent regime, Steinmetz-type models are able to describe both motors' behavior. From the performed tests, the parameters of both motors' models were deduced. A variable load was used to obtain both motor's characteristics (conventional and superconducting). Experimental obtained characteristics of both motors are compared with the ones predicted from parameters' calculation. The HTS motor provides high efficiency then the conventional ones.

An architecture for the operation of a recuperative-type glass furnace is introduced in this paper. It is based on a hierarchical scheme, with two main parts: process optimisation and process modelling. Process optimisation is carried out by an expert controller, and uses genetic algorithms to solve a multiobjective optimisation problem. Process modelling is performed by a learning system, based on a fuzzy learning-by-examples algorithm. Results of real and simulated experiments with the glass manufacturing process are presented.

High temperature superconducting (HTS) machines are recognized to offer several advantageous features when comparing to conventional ones. Amongst these, highlights the decrease in weight and volume of the machines, due to increased current density in conductors or the absence of iron slots' teeth; or the decrease in AC losses and consequent higher efficiency of the machines, even accounting for cryogenics. These concepts have been already demonstrated and some machines have even achieved commercial stage. In this paper, several alternative approaches are applied to electrical motors employing HTS materials. The first one is an all superconducting linear motor, where copper conductors and permanent magnets are replaced by Bi-2223 windings and trapped flux magnets, taking advantage of stable levitation due to flux pinning, higher current densities and higher excitation field. The second is an induction disk motor with Bi-2223 armature, where iron, ironless and hybrid approaches are compared. Finally, an innovative command strategy, consisting of an electronically variable pole pairs' number approach, is applied to a superconducting hysteresis disk motor. All these concepts are being investigated and simulation and experimental results are presented.

A presente dissertação surge pelo interesse em estudar a adequação do uso de sistemas solares fotovoltaicos na electrificação de serviços primários em povoados remotos nos países Africanos mais carenciados. A abordagem teórica tem como objectivo principal reflectir sobre a importância destas aplicações intervindo naquelas que são consideradas as maiores dificuldades dos países subdesenvolvidos, ou seja, saneamento básico, serviços de saúde e meios de comunicação adequados. Nesse contexto estuda-se a viabilidade de alimentar com energia eléctrica produzida localmente unidades sanitárias na província de Sofala (Moçambique). O trabalho exigiu por isso um estudo de caso baseado numa dessas unidades. Mediante a análise das amostras recolhidas para esta investigação elaborou-se através de ferramentas informáticas um dimensionamento e uma modelação adequadas ao sistema fotovoltaico a ser implementado. Os resultados obtidos de acordo com os requisitos da unidade sanitária permitiram dimensionar os elementos do sistema bem como, simular hora a hora o seu funcionamento diário ao longo do ano. Uma vez provada a sua viabilidade incluiuse ainda neste trabalho um anteprojecto da instalação.