Publications

Export 8 results:
Sort by: Author [ Title  (Asc)] Type Year
A B C D E F G H I J K L M N O P Q [R] S T U V W X Y Z   [Show ALL]
C
Raposo, P., J. Martins, J. Correia, Maria E. Salavessa, Cristina Reis, José Xavier, and Abilio M. P. de Jesus. "Characterization of the mechanical behaviour of wooden construction materials from quinta lobeira de cima." International Journal of Structural Integrity. 9 (2018): 396-410. AbstractWebsite

Purpose The antique structures are part of the inheritance that our elders left, being important to preserve their memories. It is important to preserve, rehabilitate and restore the historic buildings protecting the cultural patrimony, attending to the actual comfort and habitability requirements. It is necessary to study the behaviour of the various elements that compose antique structures (masonry and wood) in order to develop assessment measures according to the characteristics of the original materials. The paper aims to discuss these issues. Design/methodology/approach An experimental campaign to characterize the mechanical behaviour of the wood of the roof of the �sequeiro� of �Quinta Lobeira de Cima�, a building from the twentieth century located in Minho, was carried out. The tested wood specimens are from two different species: chestnut and oak. Compression, tension and static flexion tests according to parallel to the grain direction were performed. Other parameters, such as density, moisture content and longitudinal modulus of elasticity in compression and in tension, were also obtained. The measurement of displacements was made with Digital Image Correlation (DIC). Findings The results of this study show the similarity between experimental and empirical values for the studied woods species. Originality/value This original study aimed at characterizing the mechanical properties using DIC of wood of the roof of the �sequeiro� of �Quinta Lobeira de Cima�, a building from the twentieth century located in Minho (Portugal). This study is part of master thesis of Jo�o Martins, an original research work.

Raposo, P. C., J. Martins, J. A. F. O. Correia, M. E. Salavessa, C. Reis, J. M. C. Xavier, and A. M. P. de Jesus. "Characterization of the Tensile Mechanical Behavior of Wooden Construction on Materials from Historic Building." Procedia Structural Integrity. 5 (2017): 1086-1091. AbstractWebsite

Abstract Ancient structures are part of the inheritance our elders left us. These historical inheritance needs to be preserved, so the historic structures need to be rehabilitated and restored, protecting the cultural patrimony and attending to the comfort and habitability required nowadays. In order to accomplish a good and economic rehabilitation is essential to study the behaviour of traditional structures elements (masonry and wood) in order to develop adequate assessment measures and techniques. In this context it was carried out an experimental campaign to characterize the tensile mechanical behavior of the woods from the �sequeiro� wood structure, integral part of the �Quinta de Lobeira de Cima� farm. This building from the 20th century is located in Minho, Portugal. Tensile Tests were carried out for two different species of wood, chestnut and oak. The tensile tests were performed to obtain the tensile strength parallel to the fibers, using the digital image correlation (DIC) for the extension measurement.

Pinto, V. C., Tiago Ramos, Sofia Alves, J. Xavier, Paulo Tavares, P. M. G. P. Moreira, and Rui Miranda Guedes. "Comparative Failure Analysis of PLA, PLA/GNP and PLA/CNT-COOH Biodegradable Nanocomposites thin Films." Procedia Engineering. 114 (2015): 635-642. AbstractWebsite

Abstract Biodegradable polymers such as poly(lactic) acid (PLA) have been studied for biomaterials applications such as natural human ligament replacement, however these materials could be applied to other sectors as aerospace, aeronautics, automotive, food packaging. \{PLA\} presents a relatively brittle with a mode I fracture behavior, being often blend with other biodegradable or non-degradable polymers to improve its fracture energy. For some existing applications, \{PLA\} components exhibit accumulated permanent deformation resulting from dynamic mechanical inputs, resulting on failure by laxity of parts. Aiming the improvement of \{PLA\} mechanical properties, the inclusion of carbon nanofillers into \{PLA\} matrix, in particular, CNT-COOH and \{GNP\} have been developed, due to their strong sp2 carbon-carbon bondings and their geometric arrangement that enhance mechanical properties of the polymer matrix. \{PLA\} and nanocomposites were produced by melt blending followed by compression molding in a hot press, with small weight percentages of nanofillers added to the matrix. Quasi static tensile tests were performed on a mechanical testing machine (Instron™ ElectroPuls E1000) along with failure analysis of specimens with centered crack with digital image correlation, revealing strain distribution along specimens.

D
Subramani, P., Sohel Rana, Bahman Ghiassi, Raul Fangueiro, Daniel V. Oliveira, Paulo B. Lourenco, and Jose Xavier. "Development and characterization of novel auxetic structures based on re-entrant hexagon design produced from braided composites." Composites Part B: Engineering. 93 (2016): 132-142. AbstractWebsite

Abstract This paper reports the first attempt of developing macro-scale auxetic structures based on re-entrant hexagon design from braided composite materials for civil engineering applications. Braided composite rods (BCRs) were produced and arranged as longitudinal and horizontal elements to produce three types of auxetic structures: (1) basic re-entrant hexagon structure, (2) basic structure modified by adding straight longitudinal elements and (3): structure-2 modified by changing structural angle. The influence of various material and structural parameters as well as structure type on Poisson's ratio and tensile properties was thoroughly investigated. The auxetic behaviour was found to strongly depend on the structural angle and straight elements, resulting in lower auxeticity with lower angles and in presence of straight elements. Material parameters influenced the auxetic behaviour to a lesser extent and a decrease in auxetic behaviour was noticed with increase in core fibre linear density and using stiffer fibres such as carbon. The reverse effect was observed in case of tensile strength and work of rupture. Among these structures, structure-3 exhibited good auxetic behaviour, balanced tensile properties, and high energy absorption capacity and their auxetic behaviour could be well predicted with the developed analytical model. Therefore, these novel structures present good potential for strengthening of civil structures.

Subramani, P., S. Rana, D. V. Oliveira, R. Fangueiro, and J. Xavier. "Development of novel auxetic structures based on braided composites." Materials & Design. 61 (2014): 286-295. AbstractWebsite
n/a
Pinto, V. C., T. Ramos, A. S. F. Alves, J. Xavier, P. J. Tavares, P. M. G. P. Moreira, and R. M. Guedes. "Dispersion and failure analysis of PLA, PLA/GNP and PLA/CNT-COOH biodegradable nanocomposites by SEM and DIC inspection." Engineering Failure Analysis. 71 (2017): 63-71. AbstractWebsite

Biodegradable polymers such as PLA have been studied for medical applications, human ligament repair is one of such cases. However, these materials can be applied in other sectors as aerospace, aeronautics, automotive, food packaging. PLA presents a relatively brittle on the mode I fracture behavior, being often blend with other biodegradable or non-degradable polymers to improve its fracture energy. For some existing applications, PLA components exhibit accumulated permanent deformation resulting from dynamic mechanical inputs, resulting on failure by laxity of parts. Aiming the improvement of PLA mechanical properties, the inclusion of carbon nanofillers into PLA matrix, in particular, CNT-COOH and GNP have been developed, due to their strong sp2 carbon-carbon bondings and their geometric arrangement that enhance mechanical properties of the polymer matrix. PLA and nanocomposites were produced by melt blending followed by compression moulding in a hot press, with small weight percentages of nanofillers added to the matrix. Nanocomposites dispersion was evaluated by SEM. Quasi static tensile tests were performed on a mechanical testing machine (Instron� ElectroPuls E1000) along with strain field measurements of specimens with centred crack with digital image correlation, revealing strain distribution along specimens.

F
Silva, TEF, S. Gain, D. Pinto, A. M. P. de Jesus, J. Xavier, A. Reis, and P. A. R. Rosa. "Fracture characterization of a cast aluminum alloy aiming machining simulation." Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 233 (2019): 402-412. AbstractWebsite

Despite extensive research regarding metal cutting simulation, the current industrial practice very often relies on empirical data when it comes to tool design. In order accurately simulate the cutting process it is not only important to have robust numerical models that closely portray the phenomenon, but also to properly characterize the material taking into account the cutting conditions. The goal of this investigation focuses on the mechanical characterization of the cast aluminum alloy AlSi9Cu3 by conducting both compression and fracture tests. Due to its very good castability, machinability, and attractive mechanical properties, this alloy is widely used in casting industry for the manufacture of automotive components, among others. Besides the experimental characterization, a numerical methodology is proposed for the modeling of the cast alloy, making use of the Johnson–Cook constitutive material model, in Abaqus/CAE. The material model is calibrated based on compression tests at multiple conditions (quasi-static, incremental dynamic and high temperatures). The identified model is then validated by simulation of the ductile fracture tests of notched specimens. The obtained numerical results were consistent with the experimentally obtained, contributing to the validity of the presented characterization technique.

N
Rodrigues, M. F., J. Correia, B. Pedrosa, A. de Jesus, B. Carvalho, C. Rebelo, J. Xavier, and R. Calçada. "Numerical analysis of a double shear standard bolted connection considering monotonic loadings." Engineering Structures and Technologies. 9 (2017): 183-194. AbstractWebsite

AbstractThe behaviour of standard boltedsteel connections submitted to monotonic loads, through the use of numerical models, is presented in the current paper.The bolted connections allow speed up constructive processes in an increasingly competitive and globalized world in which the costs are a decisive factor in the development of a project. The use of computational tools in the analysis of bolted connections becomes determinant, mainly for new solutions or solutions less explored in terms of design codes.Throughout the years, bolted connections have been suffering transformations resulting from research activities performed by many authors. Rivets have been replaced by bolts, the main achievement being the pre-stressed bolts. Methodologies based on finite element analyses were proposed for double shear bolted connection. The non-linear behaviour of these connections is investigated and their performances are compared. In the numerical modelling of the bolted connection, linear elastic and elastoplastic analyzes reveal that there are two slip levels associated with local non-linearities caused by the contact pairs, which vary with clamping stresses.