jmc-xavier

Abstract Ancient structures are part of the inheritance our elders left us. These historical inheritance needs to be preserved, so the historic structures need to be rehabilitated and restored, protecting the cultural patrimony and attending to the comfort and habitability required nowadays. In order to accomplish a good and economic rehabilitation is essential to study the behaviour of traditional structures elements (masonry and wood) in order to develop adequate assessment measures and techniques. In this context it was carried out an experimental campaign to characterize the tensile mechanical behavior of the woods from the �sequeiro� wood structure, integral part of the �Quinta de Lobeira de Cima� farm. This building from the 20th century is located in Minho, Portugal. Tensile Tests were carried out for two different species of wood, chestnut and oak. The tensile tests were performed to obtain the tensile strength parallel to the fibers, using the digital image correlation (DIC) for the extension measurement.

Purpose The antique structures are part of the inheritance that our elders left, being important to preserve their memories. It is important to preserve, rehabilitate and restore the historic buildings protecting the cultural patrimony, attending to the actual comfort and habitability requirements. It is necessary to study the behaviour of the various elements that compose antique structures (masonry and wood) in order to develop assessment measures according to the characteristics of the original materials. The paper aims to discuss these issues. Design/methodology/approach An experimental campaign to characterize the mechanical behaviour of the wood of the roof of the �sequeiro� of �Quinta Lobeira de Cima�, a building from the twentieth century located in Minho, was carried out. The tested wood specimens are from two different species: chestnut and oak. Compression, tension and static flexion tests according to parallel to the grain direction were performed. Other parameters, such as density, moisture content and longitudinal modulus of elasticity in compression and in tension, were also obtained. The measurement of displacements was made with Digital Image Correlation (DIC). Findings The results of this study show the similarity between experimental and empirical values for the studied woods species. Originality/value This original study aimed at characterizing the mechanical properties using DIC of wood of the roof of the �sequeiro� of �Quinta Lobeira de Cima�, a building from the twentieth century located in Minho (Portugal). This study is part of master thesis of Jo�o Martins, an original research work.

AbstractThe behaviour of standard boltedsteel connections submitted to monotonic loads, through the use of numerical models, is presented in the current paper.The bolted connections allow speed up constructive processes in an increasingly competitive and globalized world in which the costs are a decisive factor in the development of a project. The use of computational tools in the analysis of bolted connections becomes determinant, mainly for new solutions or solutions less explored in terms of design codes.Throughout the years, bolted connections have been suffering transformations resulting from research activities performed by many authors. Rivets have been replaced by bolts, the main achievement being the pre-stressed bolts. Methodologies based on finite element analyses were proposed for double shear bolted connection. The non-linear behaviour of these connections is investigated and their performances are compared. In the numerical modelling of the bolted connection, linear elastic and elastoplastic analyzes reveal that there are two slip levels associated with local non-linearities caused by the contact pairs, which vary with clamping stresses.