Publications

Export 2 results:
Sort by: Author Title [ Type  (Desc)] Year
Journal Article
Biscaia, H. C., and P. Ribeiro. "A temperature-dependent bond-slip model for CFRP-to-steel joints." Composite Structures. 217 (2019): 186-205. AbstractWebsite

It is supposed that the adhesively bonded structures would perform well during their lifetime, but the action of high temperatures may affect the initial integrity of the joints, as recognized by some researchers. Still, there are few studies proposing a model to locally predict the interfacial bond behaviour of Carbon Fibre Reinforced Polymers (CFRP) bonded to a steel substrate when subjected to temperature changes. The influence of temperature on CFRP-to-steel bonded joints is, therefore, not very well understood yet and more studies are needed to better understand how these joints behave under such circumstances. The present work aims to contribute to the mitigation of the existing lack of knowledge on the performance of CFRP-to-steel bonded joints under high temperatures. Therefore, an experimental program was considered and specimens were tested at different temperatures: 20 °C, 35 °C, 50 °C, 65 °C, 80 °C, and 95 °C. To help the interpretation of the results, an analytical model is proposed to predict the load capacity of the CFRP-to-steel joints. The local bond-slip behaviour of the tested specimens is also analyzed and, based on a literature review, a temperature-dependent bond-slip model with a bi-linear shape is proposed and implemented into a commercial software based on the Finite Element Method (FEM). © 2019 Elsevier Ltd

Biscaia, H. C., and C. Chastre. "Theoretical analysis of fracture in double overlap bonded joints with FRP composites and thin steel plates." Engineering Fracture Mechanics. 190 (2018): 435-460. AbstractWebsite

The effective stress transfer between the fiber reinforced polymers (FRP) and the steel substrate is crucial for the successful retrofit of existing steel structures with FRP composites. However, there are no standard tests for FRP-to-steel interfaces, wherefore different test configurations have been used in recent years to assess the bond behaviour in these interfaces. The present study shows that the choice of test configuration is highly important and leads to different transfer stresses between the FRP and steel composites and consequently, has a direct influence on the strength of the bonded joint. Therefore, it is important to understand the debonding process that occurs in each test and avoid misinterpretations, erroneous analyses and dangerous characterizations of the interfacial behaviour of these interfaces. The current study presents a new analytical approach for the prediction of the debonding of FRP-to-steel interfaces when double-lap pull or double-strap tests are used. © 2017 Elsevier Ltd