Publications

Export 4 results:
Sort by: Author Title Type [ Year  (Asc)]
2019
Biscaia, H. C., R. Micaelo, and C. Chastre. "Cyclic performance of adhesively bonded joints using the Distinct Element Method: Damage and parametric analysis." Composites Part B: Engineering. 178 (2019). AbstractWebsite

Adhesively bonded joints have been widely used by engineers to solve problems in different industries. Despite recent studies which have helped with the design and application of these joints, there are still several uncertainties that justify empirical implementation in practice. One main aspect is the rigorous understanding of the performance of these joints when subjected to cyclic loading. Although the monotonic performance of adhesively bonded joints is well known, the cyclic behaviour raises several issues. Therefore, a numerical strategy based on the Distinct Element Method (DEM) was implemented in this work to mitigate the lack of knowledge about the cyclic behaviour between two materials adhesively bonded to each other. For that purpose, the single-lap pull-push test was modelled and due to the diversity of the existing cohesive models, four different bond-slip relationships and two unloading paths (with ductile or “cleavage unloading”) were considered. The results suggest that if the bond-slip relationship has an elastic stage, then the interfacial bond degradation is delayed. On the other hand, the interfacial damage of the joints with the number of cycles increases rapidly in those cases where the bond-slip relationships have no elastic stage and, at the same time, the slip accumulation is allowed. In addition, the results of two different tests available in the literature were implemented and fairly reproduced by the DEM. © 2019 Elsevier Ltd

2022
Biscaia, H. C., and R. Micaelo. "Emerging anchored FRP systems bonded to steel subjected to monotonic and cyclic loading: A numerical study." Engineering Fracture Mechanics. 261 (2022). AbstractWebsite

Recently, the study of the bond behaviour of hybrid joints has increased due to their application in different industries. Their main purpose is to obtain lightweight but strong, durable structures. In addition, in some industries such as the automotive industry, those requirements may facilitate the construction of vehicles that have lower carbon dioxide emissions. Although the knowledge on the bond behaviour of hybrid bonded joints under monotonic loading is sufficient, the knowledge on the cyclic bond behaviour needs to be improved. The present work aims to mitigate that gap by proposing a numerical model in which the cyclic bond performance between a Carbon Fiber Reinforced Polymer (CFRP) bonded to a steel substrate can be analysed. The results provided by the Externally Bonded Reinforcement (EBR) are used as reference data. These other simulated bonding techniques cover cases where the CFRP is anchored to the substrate in different ways, which are becoming more popular, namely by: (i) linearly increasing the width of the CFRP; (ii) using the mixed adhesive concept (two solutions were considered); (iii) using a steel plate on top of the CFRP strip; and (iv) assuming no interfacial slips at the CFRP unpulled end, which is intended to simulate a perfect anchorage. Compared to the simulations carried out under monotonic loading, the simulations with the adopted cyclic loading history (loading/unloading cycles), allowed us to observe a degradation of the bond strength of the joints with the number of cycles. However, if the overlapped bonded joint is long enough, the strength of the CFRP-to-steel joints is not affected. Excluding the numerical specimens with the perfectly anchored CFRP, i.e. with an “ideal” anchorage, the length of the other adopted anchorages affected either the strength or the ductility of the joint, whether subjected to a monotonic or to the adopted cyclic loading protocol. © 2022 Elsevier Ltd

Biscaia, H. C., M. S. Carvalho, A. P. Martins, and R. Micaelo. "Interfacial failure of circular or tubular hybrid bonded joints: A theoretical description." Engineering Failure Analysis. 132 (2022). AbstractWebsite

In different industries, the bonding technique has gained several advances in recent years. However, due to the specificity of each industry, the bonded joints may present different configurations. For instance, in the case of metallic truss bridges, the use of Carbon Fibre Reinforced Polymers (CFRP) bonded on the steel surface members may require circular or even tubular transitions between these materials. Although the bonded transitions between a metal and a composite material have been deeply studied with flat surfaces the information on circular or tubular hybrid bonded joints is still scarce. Therefore, the present study aims to mitigate some of this lack of knowledge by proposing an analytical solution able to describe the interfacial debonding process between a circular or tubular bonded transition between two materials. The proposed model also aims to simulate the interfacial debonding of double butt (or stepped) lap joints. Under these circumstances, a bilinear local adhesive model is adopted which required the quantification of the elastic and the softened stiffnesses as well as the pure Mode II fracture energy. The Finite Element Method (FEM) is used for the validation of the proposed model. The behaviour of the adhesive joint between materials is numerically modelled through the Cohesive Zone Modelling (CZM) in which the same bilinear shape used in the analytical solutions is adopted. Different situations were analyzed thoroughly and the numerical simulations tracked very closely the analytical results obtained from the proposed closed-form solutions. © 2021 Elsevier Ltd

Micaelo, R., M. Carvalho, R. Almeida, W. - Y. Gao, and H. Biscaia. "Numerical Analysis on the Bond Performance of Different Anchored Joints under Monotonic and Cyclic Pull-push Loading." Journal of Applied and Computational Mechanics. 8 (2022): 388-404. AbstractWebsite

This study aims to mitigate the gap of knowledge on the cyclic bond behaviour of Carbon Fiber Reinforced Polymer (CFRP) bonded onto a steel substrate. The Distinct Element Method was used to model different bonding techniques such asExternally Bonded Reinforcement (for reference purposes); the linear increase of the width of the CFRP composite; theassumption of a mixed adhesive; and using an additional steel plate bonded on the top of the CFRP. Compared with themonotonic loading simulations, the load capacity and ductility of the joints with the lowest overlapped bonded lengths decreasedwith the number of cycles. However, the strength of the CFRP-to-steel joints was not affected if the overlapping bonded joint hada long length © 2022. Published by Shahid Chamran University of Ahvaz