@article {6787,
	title = {Numerical modelling of the effects of elevated service temperatures on the debonding process of frp-to-concrete bonded joints},
	journal = {Composites Part B: Engineering},
	volume = {70},
	year = {2015},
	note = {<p>n/a</p>
},
	pages = {64-79},
	abstract = {<p>There are many issues concerning the performance behaviour of FRP-to-concrete interfaces at elevated service temperatures (EST). At EST, i.e. slightly above the glass transition temperature (Tg), some properties associated with the FRP composites, such as the stiffness, strength or the bond characteristics, degrade. This is a crucial issue and there are only a few studies that take into account such effects on FRP-to-concrete interfaces at EST. This paper examines, through a numerical analysis, the performance of FRP-to-concrete bonded joints at EST using a new discrete model based on truss elements and shear springs. The External Bonded Reinforcement (EBR) systems subjected to EST are analyzed. The numerical discrete model was implemented in a MATLAB routine and the bond-slip curves of the interfaces at EST were obtained from a model found in literature. The numerical results revealed that the interface at EST behaves similarly to one with two equal mechanical loads applied at both ends of the FRP plate. The load-slip curves or bond stresses, strains or slippages along the bonded length obtained from several bond-slip curves at different temperatures were obtained. Two different single-lap shear tests were simulated at steady-state (steady temperature followed by load increase) and transient state (steady load followed by temperature increase). Regarding the influence of the temperature on the adhesion between the FRP and concrete, the results showed that an increase in the temperature at an earlier situation, i.e. during a period where temperature had no influence in the concrete deformations, leads to an increase in the effective bond length of the interface affecting the initial strength of the interface.</p>
},
	keywords = {A. Laminates, B. Debonding, C. Numerical analysis, Temperature, Thermal stresses},
	isbn = {1359-8368},
	url = {http://www.sciencedirect.com/science/article/pii/S1359836814004971},
	author = {Biscaia, Hugo C. and Chastre, Carlos and Viegas, Andr{\'e} and Franco, Noel}
}
